The following six independent length measurements were made (in feet) for a line: 736.352, 736.363, 736.375, 736.324, 736.358, and 736.383. Determine the standard deviation of the measurements.

Answer:

it is not affected by a change of units

Step-by-step explanation:

Since the correlation coefficient has no dimensions, it is not affected by a change of units. Then it will remain the same after the conversion

In fact, the linear correlation coefficient ρ ,where

ρ = Cov (X,Y) / (σx*σy)

then the units [ ] of ρ are

[ρ] = [ Cov (X,Y) ] / [σx]*[σy] = σ²/σ² = 1 → dimensionless

is more useful than using covariance [ Cov (X,Y) ]  , since dividing by the standard deviations eliminates the units and standardise the variable

Answer:

The person would end up with 8 Bitcoins.

Step-by-step explanation:

This question can be solved by consecutive rules of three.

If someone traded $83,000 US dollars for Japanese yen, then traded the yen for Bitcoin, how many Bitcoin would that person end up with?

Each US dollar is worth 107.35 yen. So how many yens are $83,000 US dollars worth?

$1 - 107.35 yen

$83,000 - x yen

[tex]x = 83000*107.35[/tex]

[tex]x = 8,910,050[/tex]

The person has 8,910,050 yens. Each bitcoin is worth 1,086,300 yens. How many bitcoins are worth 8,910,050 yens?

1 bitcoin - 1,086,300 yens

x bitcoins - 8,910,050 yens

[tex]1086300x = 8910050[/tex]

[tex]x = \frac{8910050}{1086300}[/tex]

[tex]x = 8.2[/tex]

Rouded to the nearest whole Bitcoin, is 8.

So the person would end up with 8 Bitcoins.

By first converting the US dollars to yen and then trading the yen for Bitcoin, using the provided exchange rates, we determine that the person would end up with roughly 8 Bitcoin.

To answer this exchange rate problem, we must first convert the US dollars to yen, then convert the yen to Bitcoin.

First, we multiply the amount of US dollars, $83,000 by the US dollar to yen exchange rate, which is 107.35 yen for every 1 US dollar. This gives us:

$83,000 * 107.35 yen/US dollar = 8,910,050 yen

Next, we trade the yen for Bitcoin by dividing by the yen to Bitcoin exchange rate. Our yen to Bitcoin rate is 1,086,300 yen for 1 Bitcoin:

8,910,050 yen ÷ 1,086,300 yen/Bitcoin ≈ 8.2 Bitcoin.

Rounding this to the nearest whole number, we find that the person ends up with approximately 8 Bitcoin.

https://brainly.com/question/35076756

#SPJ3

Answer:

Paul should trim both hedges and Jared should mow both lawns.

Each neighbor would save 30 minutes per week

Step-by-step explanation:

The time each neighbor takes to finish each task is presented below:

[tex]\begin{array}{ccc}&Paul&Jared\\Mow&120&30\\Trim&90&60\end{array}[/tex]

Jared is better at mowing the lawn than trimming hedges, while Paul is better at trimming hedges than mowing the lawn. Therefore, the two neighbors could gain by specializing and trading lawn services if Paul were to trim both hedges and Jared were to mow the lawns.

The time saved by each is:

[tex]P = 210 -90-90=30\ min\\J = 90-30-30=30\ min[/tex]

Answer:

The given value is discrete  variable.

Step-by-step explanation:

Discrete Variable:

Discrete Variable are those variables that can only take on a finite number of values are called "discrete variables." All qualitative variables are discrete. Some quantitative variables are discrete, such as performance rated as 1,2,3,4, or 5, or temperature rounded to the nearest degree.

Here They have visited the doctor many times so it will be a whole number for sure.

Answer:

The solution to the differential equation

y' = (7cos5x)/(8 - 3y); y(0) = 3

is

16y - 3y² = 70sin5x + 21

Step-by-step explanation:

y' = (7cos5x)/(8 - 3y)

This can be written as

dy/dx = (7cos5x)/(8 - 3y)

Separate the variables

(8 - 3y)dy = (7cos5x)dx

Integrate both sides

8y - (3/2)y² = 35sin5x + C

Applying the initial condition y(0) = 3

8(3) - (3/2)(3)² = 35sin(5(0)) + C

24 - (27/2) = 0 + C

C = 21/2

Therefore,

8y - (3/2)y² = 35sin5x + 21/2

Or

16y - 3y² = 70sin5x + 21

Answer:

B.) square root of 2

E.) -0.54

G.) 5/3

H.) 1.29

Step-by-step explanation:

A probability of an event is how likely the event is to occur. It is always positive values, between 0% and 100%, or as decimals, between 0 and 1.

A.) 1

Can be a probability

B.) square root of 2

The square root of 2 is 1.41. 1.41 is higher than 1, so square root of 2 cannot be a probability

C.) 0

Can be a probability

D.) 0.04

0.04 = 4%

Can be a probability

E.) -0.54

Negative values cannot be probabilities

F.) 3/5

3/5 = 0.6 = 60%

Can be a probability

G.) 5/3

5/3 = 1.67

Higher than 1, so cannot be a probability

H.) 1.29

Higher than 1, cannot be a probability

Option d correctly interprets the p-value, signifying there is a 3.1% chance of observing an average sales of 85 or more daily bowls given the true mean is 75 or less. It indicates significant evidence against the null hypothesis, suggesting increased sales at the new location.

When interpreting the p-value of the hypothesis test conducted by the food truck operator, option d is the correct interpretation: There is a 3.1% chance of obtaining a sample with a mean of 85 or higher assuming that the true mean sales at the new location is still equal to or less than 75 bowls a day. The p-value in a one-sided hypothesis test indicates the probability of observing a result as extreme as, or more extreme than, the sample result, under the assumption that the null hypothesis is true. The null hypothesis in this case is that the true mean daily sales have not changed and remain at 75 bowls per day or less. Hence, with a p-value of 0.031, there is significant evidence against the null hypothesis, and the operator has reason to believe that the average sales have indeed increased at the new location.

The p-value of 0.031 means there's a 3.1% chance of obtaining a sample mean of 85 bowls or higher if the true mean remains 75 bowls per day. Hence option d is the correct option. This suggests sufficient evidence to reject the null hypothesis and conclude that soup sales at the new location have likely increased.

The food truck operator has conducted a one-sided hypothesis test to determine if his daily sales at the new location have increased from the traditional 75 bowls of noodle soup.

d. There is a 3.1% chance of obtaining a sample with a mean of 85 or higher assuming that the true mean sales at the new location is still equal to or less than 75 bowls a day.

Since the p-value of 0.031 is less than the typical significance level of 0.05, there is sufficient evidence to reject the null hypothesis and conclude that the daily sales at the new location have likely increased.

Answer: [tex]P(A) = 0.23[/tex]

Step-by-step explanation:

Given :

[tex]P(A/B) = 0.2[/tex]

[tex]P(A/B^{1})=0.3[/tex]

[tex]P(B)= 0.7[/tex]

[tex]P(A) = ?[/tex]

From rules of  probability :

[tex]P(A) = P(AnB) + P(A n B^{1})[/tex] ........................... equation *

[tex]P(A n B)[/tex] can be written as [tex]P(A/B)[/tex] x [tex]P(B)[/tex]

Also , [tex]P(A/B^{1})[/tex] can be written as  [tex]P(A/B^{1})[/tex] x [tex]P(B^{1})[/tex]

substituting into equation * , we have

[tex]P(A) = P(A/B)[/tex][tex]P(B) + P(A/B^{1})P(B^{1})[/tex]

since P(B) = 0.7, then [tex]P(B^{1}) = 1 - P(B) = 0.3[/tex]

so , substituting each values , we have

[tex]P(A) = (0.2)(0.7) + (0.3)(0.3)[/tex]

[tex]P(A) = 0.14 + 0.09[/tex]

[tex]P(A) = 0.23[/tex]

Answer:

The area of the parallelogram is [tex]A=\sqrt{26}[/tex].

Step-by-step explanation:

Let's rewrite these two vectors:

[tex]u=i-2j+2k[/tex]

[tex]v=0i+3j-k[/tex]    

Let's recall that the area of the parallelogram is the magnitude of the cross product between these vectors.            

We can use the Determinant method to find it.        

[tex]u \times v=\left[\begin{array}{ccc}i&j&k\\1&-2&2\\0&3&-1\end{array}\right] = i((-2)*(-1)-2*3)-j(1*(-1)-2*0)+k(1*3-(-2)*0)=i(2-6)-j(-1)+k(3)=-4i+j+3k[/tex]

Now, the magnitude is the square root of each component squared. It will be:

[tex]|u \times v|=\sqrt{(-4)^{2}+(1)^{2}+(3)^{2}}=\sqrt{16+1+9}=\sqrt{26}[/tex]

Therefore the [tex]A=\sqrt{26}[/tex].      

I hope it helps you!

The area of the parallelogram formed by vectors u = i - 2j + 2k and v = 3j - k is 3[tex]\sqrt{10}[/tex] square units, calculated using the cross product formula.

To find the area of the parallelogram with adjacent sides u and v, where:

u = i - 2j + 2k

v = 3j - k

We can use the cross product of u and v to calculate the area. The magnitude of the cross product represents the area of the parallelogram formed by these vectors.

The cross product of two vectors u and v is given by:

u x v = |u| * |v| * sin(θ) * n

Where:

|u| and |v| are the magnitudes of u and v, respectively.

θ is the angle between u and v.

n is the unit vector perpendicular to the plane formed by u and v.

First, let's calculate the magnitudes of u and v:

|u| = [tex]\sqrt{(1^2 + (-2)^2 + 2^2)}[/tex] = [tex]\sqrt{(1 + 4 + 4)}[/tex] = [tex]\sqrt{9}[/tex]= 3

|v| = [tex]\sqrt{(0^2 + 3^2 + (-1)^2)}[/tex] = [tex]\sqrt{(0 + 9 + 1)}[/tex] = [tex]\sqrt{10}[/tex]

Now, let's find the angle θ between u and v. We can use the dot product formula:

u · v = |u| * |v| * cos(θ)

Since u · v = 0 (they are orthogonal), we have:

0 = 3 * [tex]\sqrt{10}[/tex] * cos(θ)

cos(θ) = 0

This means θ is 90 degrees (π/2 radians).

Now, we can calculate the area using the cross product formula:

Area = |u x v| = |u| * |v| * sin(θ)

Area = 3 * [tex]\sqrt{10}[/tex] * 1 (sin(π/2) = 1)

Area = 3[tex]\sqrt{10}[/tex] square units

So, the area of the parallelogram formed by the vectors u and v is 3[tex]\sqrt{10}[/tex]square units.

For more such questions on parallelogram

https://brainly.com/question/20526916

#SPJ3

Complete question below :

Given two vectors u = 2i - 3j + k and v = i + 4j - 2k, calculate the area of the parallelogram formed by these vectors.

Answer:

0.8 or 80%

Step-by-step explanation:

Since the time is uniformly distributed, every possible travel time has the same likelihood of occurring.

Lower boundary (L) = 40 minutes

Upper boundary (U) = 90 minutes

The probability that a student finishes her trip in 80 minutes or less is:

[tex]P(t\leq 80) = \frac{80-L}{U-L}=\frac{80-40}{90-40}\\P(t\leq 80) = 0.8=80\%[/tex]

The probability is 0.8 or 80%.

Answer:

80%

Step-by-step explanation:

Answer:

(a) The histogram is shown below.

(b) E (X) = 4.2

(c) SD (X) = 2.73

Step-by-step explanation:

Let X = r = a driver will tailgate the car in front of him before passing.

The probability that a driver will tailgate the car in front of him before passing is, P (X) = p = 0.35.

The sample selected is of size n = 12.

The random variable X follows a Binomial distribution with parameters n = 12 and p = 0.35.

The probability function of a binomial random variable is:

[tex]P(X=x)={n\choose x}p^{x}(1-p)^{n-x}[/tex]

(a)

For X = 0 the probability is:

[tex]P(X=0)={12\choose 0}(0.35)^{0}(1-0.35)^{12-0}=0.006[/tex]

For X = 1 the probability is:

[tex]P(X=1)={12\choose 1}(0.35)^{1}(1-0.35)^{12-1}=0.037[/tex]

For X = 2 the probability is:

[tex]P(X=2)={12\choose 2}(0.35)^{2}(1-0.35)^{12-2}=0.109[/tex]

Similarly the remaining probabilities will be computed.

The probability distribution table is shown below.

The histogram is also shown below.

(b)

The expected value of a Binomial distribution is:

[tex]E(X)=np[/tex]

The expected number of vehicles out of 12 that will tailgate is:

[tex]E(X)=np=12\times0.35=4.2[/tex]

Thus, the expected number of vehicles out of 12 that will tailgate is 4.2.

(c)

The standard deviation of a Binomial distribution is:

[tex]SD(X)=np(1-p)[/tex]

The standard deviation of vehicles out of 12 that will tailgate is:

[tex]SD(X)=np(1-p)=12\times0.35\times(1-0.35)=2.73\\[/tex]

Thus, the standard deviation of vehicles out of 12 that will tailgate is 2.73.

To determine the probability distribution, create a histogram showing the possible values of r and their probabilities. The expected number of vehicles that will tailgate can be calculated by multiplying each value of r by its probability and summing up the results. The standard deviation can be found by calculating the variance and taking the square root of it.

In order to determine the probability distribution of the number of vehicles that tailgate before passing, we need to consider the given information. We know that about 35% of all drivers tailgate. Since we are passed by 12 vehicles, the number of vehicles that tailgate can range from 0 to 12. To create a histogram showing the probability distribution, we need to calculate the probability of each possible value of r and represent them in a bar graph.

(b) To compute the expected number of vehicles that will tailgate, we need to multiply each possible value of r by its corresponding probability and sum up the results. This will give us the average number of vehicles that tailgate out of the 12 vehicles that passed us.

(c) The standard deviation of this distribution can be calculated by determining the variance and taking the square root of it. Variance is calculated by summing up the squared differences between each value of r and the expected value, multiplying each squared difference by its corresponding probability, and summing up the results.

https://brainly.com/question/32733554

#SPJ3

Answer:

28 sandwiches

Step-by-step explanation:

If Jack takes 7 minutes to make a pie, the time that would take Jack to produce 4 pies is:

[tex]t=4*7=28\ minutes[/tex]

Jack would be willing to trade away the amount of sandwiches he is able to produce in 28 minutes to get 4 pies from Rodger. In 28 minutes, the number of sandwiches Jack can produce is:

[tex]S=1*28=28\ sandwiches[/tex]

Jack would be willing to trade away 28 sandwiches for 4 pies.

You can convert the given normal distribution to standard normal distribution and then use the z tables to find the needed probabilities.

Rounding to one places of decimal, we get the answers as:

If we've got a normal distribution, then we can convert it to standard normal distribution and its values will give us the z score.

If we have

[tex]X \sim N(\mu, \sigma)[/tex]

(X is following normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex])

then it can be converted to standard normal distribution as

[tex]Z = \dfrac{X - \mu}{\sigma}, \\\\Z \sim N(0,1)[/tex]

Using the z scores will help to find the probabilities from the z tables(available online).

Let for the given test, the test scores be tracked by a random variable X, then by the given data, we have:

[tex]X \sim N(530, 119)[/tex]

The needed probabilities are

Converting the distribution to standard normal variate, the probabilities become

[tex]Z = \dfrac{X - 530}{119}\\\\Z \sim N(0, 1)[/tex]
The probabilities convert to

a) [tex]P( 411 < X < 649 ) = P(X < 649) - p(X < 411)\\[/tex]

[tex]P(\dfrac{411 - 530}{119} < Z < \dfrac{ 649 - 530}{119}) = P(-1 < Z < 1) = P(Z < 1) - P(Z < -1)[/tex]

(Know the fact that in continuous distribution, probability of a single point is 0, so we can write [tex]P(Z < a) = P(Z \leq a)[/tex] )

Also, know that if we look for Z = a in z tables, the p value we get is [tex]P(Z \leq a) = p \: value[/tex]

The p value at Z = 1 is 0.8413 and at Z = -1 is 0.1587,

Thus, [tex]P(411 < X < 649) = P(Z < 1) - P(Z < -1) = 0.8413 - 0.1587 = 0.6826[/tex]

b) [tex]P(X < 411) + P(X > 649) = 1 - P(411 \leq X \leq 649) = 1 - P(411 < X < 649)\\\\P(X < 411) + P(X > 649) = 1 - 0.6826 = 0.3174[/tex]

c) [tex]P(X > 768) = 1 - P(X \leq 768)[/tex]

[tex]P(X > 768) = 1 - P(Z < \dfrac{768 - 530}{119}) = 1 - P(Z < 2) = 1 - 0.9772 = 0.0228[/tex]

Rounding to one places of decimal, we get the answers as:

Learn more about standard normal distribution here:

https://brainly.com/question/21262765

A non responses is a failure to reply something and is a condition that is not responding.

There exists various factors that can create this effect, for example: type of survey, bad questions, un-probabilistic sample, etc.

Hence the options E and F are correct.

Learn more about the some solutions to​ nonresponse.

brainly.com/question/13951856.

To tackle nonresponse in surveys, strategies such as reducing undercoverage, using stratified sampling, changing the wording of questions, offering incentives, reducing interview error, and attempting callbacks can be effective. These methods help enhance response rates and the reliability of survey data.

Tackling nonresponse in surveys is crucial for ensuring accurate and reliable data. Here are some effective solutions:

→ Reduce Undercoverage: By ensuring the survey reaches all relevant subpopulations, you can minimize the chances of missing out on certain groups.

→ Use Stratified Sampling: This method can enhance response rates by making sure each subgroup is adequately represented.

→ Change Wording of Questions: Making questions clearer and more straightforward can increase the likelihood of responses.

→ Offer Rewards and Incentives: Providing incentives can motivate participants to complete the survey.

→ Reduce Interview Error: Training interviewers to minimize bias and errors can improve response quality.

→ Attempt Callbacks: Following up with nonrespondents can help in obtaining more responses.

These methods are essential to improve response rates and, consequently, the accuracy of survey results.

Full Question

The number of messages that arrive at a Web site is a Poisson distributed random variable with a mean of 6 messages per hour.

a. What is the probability that 6 messages are received in 1 hour?

b. What is the probability that 10 messages are received in 1.5 hours?

c. What is the probability that fewer than 2 messages are received in 0.5 hour?

Answer and Explanation

Given

λ = 6 per hour

Poisson Probability P(X = k) = (λ^k e^-λ)/k!

a. K = 6

P(X = 6) = (6^6 e^-6)/6!

P(X = 6) = 0.160623141047980

P(X = 6) = 0.1606--------- Approximated

b.

If 6 messages are received on average per hour then the number of messages received on average per 1.5 hours is

λ = 6 *1.5

λ = 9

For k = 10

P(X = 10) = (9^10 e^-9)/10!

P(X = 10) = 0.118580076008570

P(X=10) = 0.1186 ---------- Approximated

c.

If 6 messages are received on average per hour then the number of messages received on average per 0.5 hours is

λ = 6 *0.5

λ = 3

For messages fewer than 2 means than k = 0 or k = 1

For k = 0

P(X = 0) = (3^0 e^-3)/0!

P(X = 0) = 0.049787068367863

P(X = 0) = 0.0498 ------_--- Approximated

For X = 1

P(X = 1) = (3^1 e^-3)/1!

P(X = 1) = 0.149361205103591

P(X = 1) = 0.1494 ---------- Approximated

P(X <2) = P(X=0) + P(X=1)

P(X<2) = 0.0498 + 0.1494

P(X<2) = 0.1996

(a) The inverse of 1234 (mod 4321) is x such that 1234*x ≡ 1 (mod 4321). Apply Euclid's algorithm:

4321 = 1234 * 3 + 619

1234 = 619 * 1 + 615

619 = 615 * 1 + 4

615 = 4 * 153 + 3

4 = 3 * 1 + 1

Now write 1 as a linear combination of 4321 and 1234:

1 = 4 - 3

1 = 4 - (615 - 4 * 153) = 4 * 154 - 615

1 = 619 * 154 - 155 * (1234 - 619) = 619 * 309 - 155 * 1234

1 = (4321 - 1234 * 3) * 309 - 155 * 1234 = 4321 * 309 - 1082 * 1234

Reducing this leaves us with

1 ≡ -1082 * 1234 (mod 4321)

and so the inverse is

-1082 ≡ 3239 (mod 4321)

(b) Both 24140 and 40902 are even, so there GCD can't possibly be 1 and there is no inverse.

The multiplicative inverse of a number is simply its reciprocal

To determine the multiplicative inverse of a mod b, one of a and b must not be an even number

(a) Multiplicative inverse of 1234 mod 4321

This can be written as:

[tex]\mathbf{1234 \times x \equiv 1\ (mod\ 4321)}[/tex]

When the extended Euclidean's algorithm is applied, we start by writing the expression in the following format:

[tex]\mathbf{Dividend = Quotient \times Divisor + Remainder}[/tex]

So, we have:

[tex]\mathbf{4321 = 1234 \times 3 + 619}[/tex]

Express 1234 using the above format

[tex]\mathbf{1234 = 619 \times 1 + 615}[/tex]

Repeat the process for all quotient

[tex]\mathbf{619 = 615 \times 1 + 4}[/tex]

[tex]\mathbf{615 = 4 \times 153 + 3}[/tex]

[tex]\mathbf{4= 3 \times 1 + 1}[/tex]

Next, we reverse the process as follows:

Make 1 the subject in [tex]\mathbf{4= 3 \times 1 + 1}[/tex]

[tex]\mathbf{1 = 4 - 3}[/tex]

Substitute an equivalent expression for 3

[tex]\mathbf{1 = 4 - (615 - 4 \times 153)}[/tex]

[tex]\mathbf{1 = 4 - 615 + 4 \times 153}[/tex]

Collect like terms

[tex]\mathbf{1 = 4 + 4 \times 153 - 615 }[/tex]

[tex]\mathbf{1 = 4 \times 154 - 615 }[/tex]

Substitute an equivalent expression for 615

[tex]\mathbf{1 = 619 \times 154 - 155 \times (1234 - 619) }[/tex]

[tex]\mathbf{1 = 619 \times 309 - 155 \times 1234 }[/tex]

Substitute an equivalent expression for 619

[tex]\mathbf{1 =(4321 - 1234 \times 3) \times 309 - 155 \times 1234}[/tex]

[tex]\mathbf{1 = 4321 \times 309 - 1082 \times 1234}[/tex]

Recall that:

[tex]\mathbf{1234 \times x \equiv 1\ (mod\ 4321)}[/tex]

So, we have:

[tex]\mathbf{1 \equiv -1082 \times 1234\ mod(4321)}[/tex]

Add 4321 and -1082

[tex]\mathbf{4321 -1082 = 3239}[/tex]

Hence, the required inverse is:

[tex]\mathbf{ -1082 \equiv 3239\ (mod\ 4321)}[/tex]

(b) Multiplicative inverse of 24140 mod 40902

Recall that:

To determine the multiplicative inverse of a mod b, one of a and b must not be an even number

Because 24140 and 40902 are both even numbers, then:

24140 mod 40902 has no multiplicative inverse

Read more about multiplicative inverse at:

https://brainly.com/question/13715269

Answer:

Correct answer is (c). 5

Step-by-step explanation:

It is important to note that solving problem requires techniques and intelligent people most especially when problem are complex or hard in nature. It is therefore important to ensure the numbers of problem solving experts should not be undersized than required to avoid over burden them and should not be too large to avoid conflict in their individual resolutions. Hence, most scientific reports state that problem solving experts should be within 3 to 5 members and as for this question, the optimum is 5 members.

Answer:

She used the simple random sampling technique because there was no condition attached to the samples she took.

Step-by-step explanation:

we have basically four types of sampling

1.Simple random sampling.

2.Systematic sampling.

3.Stratified sampling.

4.Cluster sampling.

simple Random sampling: is a sampling technique where every item in the population has an even chance and likelihood of being selected in the sample.

Answer:

1300 millimeters

Step-by-step explanation:

Answer:

1300 mm

Step-by-step explanation:

The volume of dump truck is 237.7 feet cubed.

Step-by-step explanation:

Given dimensions are;

Length of dump truck = 12.05 feet

Width of dump truck = 3.86 feet

Height of dump truck = 5.11 feet

Volume = Length * Width * Height

Volume = 12.05 * 3.86 * 5.11

Volume = 237.681 ft³

Rounding off to nearest tenth

Volume = 237.7 ft³

The volume of dump truck is 237.7 feet cubed.

Keywords: volume, multiplication

Learn more about multiplication at:

#LearnwithBrainly

Answer: for 10th percentile, X = 60.53inches

for 80th percentile, X = 61.53 inches

Step-by-step explanation:

the relationship between the mean, standard deviation and the standard normal distribution is given as

X = μ + σZ

where μ is the mean and σ is the standard deviation of the variable X, and Z is the value from the standard normal distribution for the desired percentile.

Hence to determine the 10th and 80th percentile, we lookup the standard normal distribution table attached below,

from the table,

at 10th percentile Z = -1.282

at 80th percentile we interpolate between 75th percentile and 90th

(80 - 75)/(90 - 75) = (Z - 0.675)/(1.282 - 0.675)

5/15 = Z - 0.675/0.607

0.333*(0.607) = Z - 0.675

Z = 0.8771

hence the Z value for the 80th percentile is 0.8771

hence

X value for 10th percentile and 80th is calculated as

X = μ + σZ

since mean = 63.7 and standard deviation = 2.47

For 10th percentile

X = 63.7 + 2.47*(-1.282)

X = 60.53

for 80th percentile

X = 63.7 + 2.47*(0.8771)

X = 61.53

Final answer:

Height at 10th percentile: 61.53 inches

Height at 80th percentile: 65.78 inches

Explanation:

Given that the heights of women are normally distributed with a mean of 63.7 inches and a standard deviation of 2.47 inches, we can find the 10th and 80th percentiles using the Z-score formula in the context of a normal distribution.

The Z-score formula is given by: Z = (X - μ) / σ, where X is the value whose Z-score we're calculating, μ is the mean, and σ is the standard deviation.

To find the 10th and 80th percentiles, we first use Z-scores corresponding to these percentiles from a standard normal distribution table:

We then apply the formula for each Z-score to find the heights corresponding to these percentiles:

Answer:

There is a 2.28% probability that the average weight of these 64 adult males is over 205 pounds.

Step-by-step explanation:

To solve this question, we have to understand the normal probability distribution and the central limit theorem.

Normal probability distribution

Problems of normally distributed samples are solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.

Central Limit Theorem

The Central Limit Theorem estabilishes that, for a random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], a large sample size can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]s= \frac{\sigma}{\sqrt{n}}[/tex]

In this problem, we have that:

[tex]\mu = 197, \sigma = 32, n = 64, s = \frac{32}{\sqrt{64}} = 4[/tex]

What is the probability that the average weight of these 64 adult males is over 205 pounds?

This is 1 subtracted by the pvalue of Z when X = 205.

So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{205 - 197}{4}[/tex]

[tex]Z = 2[/tex]

[tex]Z = 2[/tex] has a pvalue of 0.9772

1 - 0.9772 = 0.0228

There is a 2.28% probability that the average weight of these 64 adult males is over 205 pounds.

The probability that the average weight of 64 randomly selected adult males is over 205 pounds is approximately 2.28%.

This problem involves the concept of normal distribution and probability in statistics. Given the mean (μ) is 197 pounds and the standard deviation (σ) is 32 pounds, we want to find the probability that the average weight of 64 randomly selected adult males (n=64) is over 205 pounds.

Firstly, we need to calculate the standard error (SE), which is σ/√n, thus SE=32/√64= 4 pounds. Next, we calculate the Z-score, which is (X-μ)/SE, thus Z=(205-197)/4=2.

A Z-score of 2 refers to a value that is 2 standard deviations away from the mean. Looking this up on a Z-table or using statistical software, we can see that the area to the left of Z=2 is approximately 0.9772, meaning there is a 97.72% chance that a randomly selected adult male's weight is below 205 pounds. Hence the probability of the weight being over 205 pounds is 1-0.9772=0.0228 or 2.28%.

https://brainly.com/question/31321305

#SPJ3

Answer:

0.75 or 75%

Step-by-step explanation:

Let R be the dominant allele for rolling the tongue and r be the recessive allele for not rolling the tongue. If both Dave and Nancy can roll their tongues and had a parent that could not, they both have a heterozygous genotype (Rr).

The sample space for the genotype of their first born child is:

S={RR, Rr, rR, rr}

Only the homozygous recessive genotype rr makes it so that their child is not able to roll his tongue. Therefore, the probability that their first born child will be able to roll his tongue is:

[tex]P=\frac{3}{4}=0.75=75\%[/tex]

Answer: The markup on the T-shirts is $ 13.50.

Step-by-step explanation:

Given : The cost price of each t-shirt = $1.50

The selling price of each t-shirt = $15

Then ,the markup on the T-shirts =  (Selling price of each t-shirt) -( Cost price of each t-shirt)

i.e. The markup on the T-shirts = $15- $1.50= $ 13.50

Hence, the markup on the T-shirts is $ 13.50.

Answer:

90%

Step-by-step explanation:

Answer:

3.945 years

Step-by-step explanation:

To answer this problem, one must know that Beethoven has composed 32 piano sonatas, 9 symphonies and 5 piano concertos.

The number of different arrangements that can be made by playing a sonata, then a symphony and then a piano concerto is:

[tex]n=32*9*5=1,440[/tex]

If a year has 365 days, the number of years that this daily policy could be continued before exactly the same program would have to be repeated is:

[tex]y=\frac{1,440}{365}=3.945\ years[/tex]

The probability that a device using five silicon chips selected randomly from a batch of 100 chips, which includes five defective ones, contains no defective chip is calculated by the ratio of selecting five good chips to selecting any five chips from the batch.

The question is asking to find the probability that a device, which uses five silicon chips selected from a batch of a hundred chips with five being defective, will have no defective chip. To solve this, we can calculate the probability step by step using the concept of combinations.

Firstly, we determine the number of ways to select five non-defective chips out of 95 good ones, which is C(95,5). Then, we calculate the total number of ways to select any five chips out of the whole batch, which is C(100,5). The probability that the device contains no defective chip is the ratio of these two numbers:

P(device has no defective chip) = C(95,5) / C(100,5)

Where C(n,k) represents the number of combinations of n items taken k at a time.

To calculate this, use factorials where C(n,k) = n! / [(n-k)!k!].

So, the probability that the device contains no defective chip, is:

P(device has no defective chip) = (95! / (90!*5!)) / (100! / (95!*5!))

Simplifying the factorials, we have:

P(device has no defective chip) = (95*94*93*92*91) / (100*99*98*97*96)

Finally, calculate this to get the decimal value, which would give the probability that the device contains no defective chips when made up from one batch.

Answer:

The balance will be $7,577.03.

Step-by-step explanation:

The compound interest formula is given by:

[tex]A = P(1 + \frac{r}{n})^{nt}[/tex]

Where A is the amount of money, P is the principal(the initial sum of money), r is the interest rate(as a decimal value), n is the number of times that interest is compounded per unit t and t is the time the money is invested or borrowed for.

In this problem, we have that:

[tex]P = 7000, r = 0.04[/tex]

Semianually means twice a year, so [tex]n = 2[/tex]

We want to find A when [tex]t = 2[/tex].

So

[tex]A = P(1 + \frac{r}{n})^{nt}[/tex]

[tex]A = 7000(1 + \frac{0.04}{2})^{2*2}[/tex]

[tex]A = 7577.03[/tex]

The balance will be $7,577.03.

Answer:

a. Categorical

b. Quantitative

c. Categorical

d. Categorical

e. Quantitative

Step-by-step explanation:

a.

Month of year with most reservations is a qualitative or categorical variable because it can't be represented numerically in a meaningful way. For example, with most reservations month of a year can be June or July.

b.

Airbnb's  total annual profit is a quantitative variable because it can be presented in numerical form and mathematical operation can be meaningfully  interpreted.

c.

Type of rental on Airbnb is a qualitative or categorical variable because it can't be represented numerically in a meaningful way. Also, it can be divided into categories whole house, private room and shared room etc.

d.

Unique 10-digit reservation number is a qualitative or categorical variable as these exists in numerical form but these numbers are used only as identifiers. The  mathematical operation on these numbers can't be meaningfully be interpreted.

e.

Number of house rentals is quantitative variable because it can be presented in numerical form and mathematical operation can be meaningfully interpreted.

The qualitative, categorical, and quantitative statements of the above cases are:

a. Categorical

b. Quantitative

c. Categorical

d. Categorical

e. Quantitative

Quantitative is the term used mainly to describe the quantity of a particular case, but not describe it as an attribute.

Categorical means describing anything in a particular way or series.

a.

The month of the year with most reserves is a qualitative or categorical variable because it can not be equal numerically in a meaningful way.

For example, with most reserves the month of the year can be June or July.

b.

Airbnb's total annual profit is a quantitative variable because it can be shown in mathematical operations that can be meaningfully interpreted.

c.

The type of rental on Airbnb is a  categorical variable because it can't be represented numerically in a meaningful way. Also, it can be divided into categories whole house, private room, shared room etc.

d.

A unique 10-digit reservation number is a qualitative or categorical variable as these exist in numerical form, but these numbers are used only as identifiers. The mathematical operation on these numbers can't be meaningfully be interpreted.

e.

The number of house rentals is a quantitative variable because it can be presented in numerical form and mathematical operation can be meaningfully interpreted.

Learn more about quantitative, refer:

https://brainly.com/question/96076

The two vectors which are orthogonal to the given vector u are (0, 4, 1) and  (8, 0, -5).

Use the concept of orthogonal vectors defined as:

The term "orthogonal" in mathematics denotes a direction at a 90° angle. If two vectors u, and v form a right angle when they are perpendicular, or if the dot product they produce is zero, then they are said to be orthogonal.

The given vector is,

u = (5, −2, 8)

Let the vector orthogonal to this is,

v = (x, y, z)

Since vectors u and v are orthogonal,

Therefore,

u.v = 0

(5, −2, 8)(x, y, z) = 0

5x -2y + 8x = 0  .....(i)

To find the vectors choose x, y, and x such that equation one is satisfied.

So take x = 0, y = 4 and z = 1

Then (x, y, z) = (0, 4, 1) satisfy the equation (i)

Similarly, choose x = 8, y = 0, z = -5

Then (x, y, z) = (8, 0, -5) satisfy the equation (i)

Hence,

Two orthogonal vectors are (0, 4, 1) and  (8, 0, -5)

To learn more about vectors visit:

https://brainly.com/question/12937011

#SPJ12

Two vectors orthogonal to u=(5, -2, 8) could be v=(2, 5, 0) and u'=(-2, -5, 0). Both vectors satisfy the definition of orthogonality, having a dot product with u equal to zero.

To find two vectors that are orthogonal to the given vector u = (5, -2, 8), we need to find two vectors that have a dot product with vector u equal to zero. This is because orthogonality (perpendicularity in 3D space) is defined by a zero dot product.

For instance, let's calculate the dot product of u with v = (2, 5, 0). It'll be (5*2) + ((-2)*5) + (8*0) = 0. Therefore, vector v = (2, 5, 0) is orthogonal to u.

For a vector in the opposite direction, we simply need to multiply every component of vector v by -1. Consequently, a vector u′ = (-2, -5, 0) is in the opposite direction of v but still orthogonal to u. So, our answer is vectors v = (2, 5, 0) and u' = (-2, -5, 0).

https://brainly.com/question/31971350

#SPJ3

Answer:

C. 15°F at 3:00 a.m

Step-by-step explanation:

We will start seeing the function they give us, as we can see it is of the form ax ^ 2 + bx + c, this means that it is a parabola.

First we will look the term a of the function

t(h) = 0.5h2 − 5h + 27.5

in this case a = 0.5 , is a positive number so we have a minimum,  this point shows us when the temperature reaches its minimum at night.

To obtain it we will have to apply this parabola formula

x = -b / 2a

in this case       h = -( -5) / 2(0.5)

                         h = 5

This 5 represents the hours that have passed since 10:00 p.m.

We add 5 to 10:00 p.m. and get the time that is 3:00 a.m.

Finally we replace the function t with this value, and obtain the value of the minimum temperature

t(h) = 0.5h2 − 5h + 27.5

t(5) = 0.5(5)^2 - 5(5) + 27.5

t = 12.5 - 25 + 27.5

t = 15

C. 15°F at 3:00 a.m

Answer:

C

Step-by-step explanation: because i take the test