Answer:
Explanation:
It's Newton's first law of motion, and object in motion continues to stay in motion unless acted upon by an unbalanced force. In this case, your body is the force that's moving on the bus. When you jump(the unbalanced force) your body is still used to being in motion, which makes you fall and not land on your feet.
Mercury, Venus, and Earth are the three planets closest to the Sun. The force of gravity on the surface of each planet is different. Which of the following places these three planets in order from greatest surface gravity to least?
A.
Mercury, Venus, Earth
B.
Earth, Venus, Mercury
C.
Earth, Mercury, Venus
D.
Venus, Earth, Mercury
Answer:
B. Earth, Venus, Mercury
Explanation:
Which of the following is an effect of increasing the wavelength of an
electromagnetic wave?
Effect of increasing the wavelength of an electromagnetic wave
Explanation:
1.Wavelength = speed of light/frequency.
2.The frequency of an electromagnetic wave increases as wavelength decreases.
3.As wavelength decreases (and frequency increases) energy increases.
4.When frequency increases more wave crests pass a fixed point each second. That means the wavelength shortens. So, as frequency increases, wavelength decreases. The opposite is also true—as frequency decreases, wavelength increases.
Answer:
Energy decrease
Explanation:
While frequencies increase, energy increase
while wavelength increase, energy decrease
PLZ HELP 150 POINTS AND BRAINLIEST
If effort is applied to the wheel, the axle turns with more _______.
If effort is applied to the axle, the wheel turns ______ and ______ than the axle.
The road wheel on a car multiply the _______ of the rear axle.
Applying a light force to turn the steering wheel of a car produces a strong force on the _________.
Answer:
A wheel and axle may either increase or decrease the input force, depending on whether the input force is applied to the axle or the wheel. ... Because the output force is less than the input force, the mechanical advantage is less than 1. However, the wheel turns over a greater distance, so it turns faster than the axle.
If you apply a force to the wheel (the handle), the wheel spins and multiplies the effort to make the output force of the axle (shaft) greater.
The drive shaft, which on most cars runs the length of the vehicle to the rear wheels, turns as the combustion engine burns gasoline. The turning drive shaft sends power to the rear axle and wheels, which cause them to turn as well, moving the car forward
There some moments when the steering wheel becomes stiff and hard to turn. From irregular servicing, lack of fluid oil to low tyre pressure or bad wheel alignment, any of these could be the cause
hope it helps plz Mark me brainliest :)
Storms are caused by. I WILL MARK BRAINLIEST
A. radiation
B. convection
C. conduction
D. hurricanes
Answer:convection
Explanation:
Convection can cause convection
Answer:
conduction is the answer
Explanation:
If a particle with a charge of +4.3 × 10−18 C is attracted to another particle by a force of 6.5 × 10−8 N, what is the magnitude of the electric field at this location?
2.2 × 1026 NC
2.8 × 10−25 NC
1.5 × 1010 N/C
6.6 × 10−11 N/C
Answer: 1.5×10^10 N/C
Explanation:
E= F/q
Where E= magnitude of the electric field
F= force of attraction
q= charge of the given body
Given F= 6.5×10^-8 N
q= 4.3× 10^-18 C
Therefore, E = 6.5×10 ^-8/ 4.3×10^-18
E = 1.5×10^10 N/C
Answer:
1.5*10^10 N/C
Explanation:
The Force per Charge Ratio
Electric field strength is a vector quantity; it has both magnitude and direction. The magnitude of the electric field strength is defined in terms of how it is measured. Let's suppose that an electric charge can be denoted by the symbol Q. This electric charge creates an electric field; since Q is the source of the electric field, we will refer to it as the source charge. The strength of the source charge's electric field could be measured by any other charge placed somewhere in its surroundings. The charge that is used to measure the electric field strength is referred to as a test charge since it is used to test the field strength. The test charge has a quantity of charge denoted by the symbol q. When placed within the electric field, the test charge will experience an electric force - either attractive or repulsive. As is usually the case, this force will be denoted by the symbol F. The magnitude of the electric field is simply defined as the force per charge on the test charge.
ELECTRIC FIELD STRENGTH= FORCE/CHARGE
If the electric field strength is denoted by the symbol E, then the equation can be rewritten in symbolic form as
E=F/q
I got this from electric field intensity; physics classroom.
https://www.physicsclassroom.com/class/estatics/Lesson-4/Electric-Field-Intensity
and please no one should report me. was just trying to help. And I already got a warning. PLEASE!!! THANK YOU VERY MUCH.
and also this picture of me doing the test explains everything
.Hope I helped
which of these changes does a submarine encounter as it returns from the bottom of the ocean to the surface of the ocean
Which changes?
Explanation:
What are your options?
What is the amount of work done when a force of 10N moves a 20kg mass of 8 meters?
Yo sup??
we should know that
work done=force*displacement
W=F.s
F=10 N
s=8 m
therefore
W=10*8
=80 N
Hope this helps.
Final answer:
The work done when a 10 N force moves a 20 kg mass 8 meters is 80 Joules.
Explanation:
The work done can be calculated using the formula: Work = Force x Distance
Given that the Force is 10 N and the Distance is 8 meters, the work done is:
Work = 10 N x 8 m = 80 Joules.
What is the value of x in the equation Ix - 3y = 30, when y = 15?
Answer: x= 75
Explanation:1x -3y = 30
And y = 15
Substitute y accordingly into the equation, so that
x - 3(15) = 30
x-45=30
Add 45 to both sides if the equation
x-45+45=30+45
x=75
If you need some help working through family problems, who would be the best choice to seek it from?
clinical psychologist
counseling psychologist
sociocultural psychologist
developmental psychologist
Answer:
counseling psychologist
If C moves to position 5 (60 meters), what is its average velocity during these 5 seconds?
(A
10 m/s
(B
11 m/s
C)
12 m/s
D)
13 m/s
If C moves to position 5 (60 meters), the average velocity during these 5 seconds is 12m/s
Explanation:
Velocity can be defined as the rate of change of position with respect to the time.Velocity is the vector quantity as it indicates displacement direction and time.Average velocity of an object is total displacement by total time.
Velocity can be calculated by using formula v=d/t. where v=velocity, d=distance and t= time duration.
Average velocity can be calculated by, v= (Δx)×(Δt) Where Δx is the total displacement of the body and ∆t is the time.
The SI unit of velocity is m/s.
Answer:
12 m/s
Explanation:
The average velocity is simply the change in displacement over the specified time interval. In this case we have a total of five intervals, which represents 5 seconds. Dividing 60 m by 5s, gives us 12 m/s, which is the magnitude of the average speed in the interval.
Explain why a reference points that are stationary are usually chosen to determine whether an object is in motion.
Answer: Stationary reference points are used to determine if a object is in motion because if the reference point is still,you will be able to see if the object is in motion. If you had a reference point that wasn't stationary, you wouldn't be able to tell if the object was in motion.
Explanation:
Stationary reference points are used to determine if a object is in motion because if the reference point is still,you will be able to see if the object is in motion. If you had a reference point that wasn't stationary, you wouldn't be able to tell if the object was in motion.
Choosing a stationary reference point is important to determine motion because motion is relative and can appear differently from different reference frames.
Explanation:A stationary reference point is usually chosen to determine whether an object is in motion because motion is a relative term. When we observe motion from a reference point that is stationary, we can easily identify the displacement and velocity of the object. For example, if we are in a car that is moving at a constant velocity, it may be difficult to determine whether an object inside the car is moving or not. However, if we observe the same object from outside the car, from a stationary reference point, we can clearly see whether it is in motion or not.
Learn more about Motion here:https://brainly.com/question/35591666
#SPJ2
24. a. Calculate the work needed to lift a 90-N
block of ice a vertical distance of 3 m. What
PE does it have?
Answer:
270J
Explanation:
Work = force x distance
Force =90N
Distance =3m
Work = 90 x 3
Work = 270J
P. E= 270J
I hope this was helpful, Please mark as brainliest= work / time
The work needed to lift the 90-N block of ice 3 m vertically is 270 J, and the block possesses 270 J of potential energy.
Work Done: To calculate the work done in lifting a 90-N block of ice 3 m vertically, you use the formula: Work = force x distance. So, Work = 90 N x 3 m = 270 J. The potential energy (PE) of the block at that height is equivalent to the work done, so the block has 270 J of potential energy.
Study the scenario.
A box is initially at the top of a slide, storing 80 J of gravitational energy. The isolated system includes the box, slide and earth.
As the box slides down the frictionless slide, what happens to the total energy of the system?
a) The total energy of the system increases to more than 80 J of energy as it gains other forms of energy
b) The isolated system stores 80 J of total energy, but it is converted to a different form of energy.
c) The isolated system stores slightly less than 80 J of total energy, and it is converted to a different form of energy
d) The total energy of the isolated system decreases to 0 once the box reaches the bottom of the slide.
Answer:
b) The isolated system stores 80 J of total energy, but it is converted to a different form of energy.
Explanation:
The Law of Conservation of Energy states that in an isolated system the total energy always remains constant. In our context this means that the box's energy cannot disappear from the isolated system of the box, slide, and the earth. Abiding the Law of Conservation of Energy, as the box slides down the friction-less table, its gravitational potential energy is converted into its kinetic energy.
Thus, in accord with the Law of Conservation of Energy, the energy of the system can neither decrease or increase, but is converted from one from to another. This rules of choices A, B, and C, leaving only choice B as correct.
3. If 2 J of wok is done in raising a 180 g apple, how far is it lifted?
Answer:
1.13m
Explanation:
From the question, we obtained the following information:
W = 2J
m = 180g
We must convert this gram (i.e 180g) to kg
1000g = 1Kg
180g = 180/1000 = 0.18kg
g = 9.8m/s2
h =?
w = mgh
h = w / mg
h = 2 / ( 0.18x9.8)
h = 1.13m
Tishaura decides to do an experiment to determine which type of sock
absorbs the most sweat. Which of these describes her doing step two of the
inquiry process?
A. Tishaura asks herself which of the three types of socks in her
drawer seems to be the most absorbent.
B. Tishaura finds that all-cotton socks weigh 0.1 ounce more after
she runs in them.
C. Tishaura measures the weights of four different kinds of socks
before and after she goes running.
D. Tishaura predicts that all-cotton socks will absorb the most sweat,
because she thinks cotton is very absorbent.
Answer:
D. Tishaura predicts that all-cotton socks will absorb the most sweat, because she thinks cotton is very absorbent.
Explanation:
The steps for scientific inquiry should be:
1. Observation
In this phase, you observe things that pique your interest and formulate a scientific question. This should be option A where Tishaura wonders which sock most absorbent.
2. Hypothesis.
The second step is making a hypothesis, educated guess about what the research result will be. This should be the option D, Tishaura expects that cotton sock absorbs more than others.
3. Experiment
In the third step, you test the hypothesis by designing and doing an experiment. It will be option C.
4. Analysis of experimental results
Gathering the result and doing analysis to find out if the hypothesis true. Tishaura found that all-cotton sock weight more. This process will be option B
5. Make a conclusion;
Determine whether you accept the hypothesis or not. There is no option that describes this process.
Step two of the inquiry process should be option D
A 0.250 kg mass is attached to a spring with k=18.9 N/m. At the equilibrium position, it moves 2.89 m/s. What is the amplitude of the oscillation? (Unit=m)
Answer: the frequency of the oscillation is given by ω=√(k/m)=√(18.9/2.5)=2.75. Keep in mind this is angular frequency, i.e. radians per second, not wavelengths per second. So the displacement can be written in the form
y = R*sin(2.75*t - δ)
Here δ is just the time offset and for our purposes is pretty irrelevant. You can in fact set it to zero since we can say we begin timing when the mass crosses equilibrium. So
y = R*sin(2.75*t)
We want to find a way to use the information "At the equilibrium position, it moves 2.89 m/s." I am going to use some calculus here since it makes things so much easier. If you haven't taken calculus yet, most likely your course has given you a formula to use instead.
We know y=0 when t=0, so y is at equilibrium when t=0. To say it moves 2.89 m/s is then to say that
y'(0) = 2.89.
From here we can differentiate the displacement function, set t=0 and solve for R. Using the chain rule:
y'(t) = 2.75*R*cos(2.75*t)
y'(0) = 2.75*R
2.75*R = 2.89
R = 1.051
Explanation: Since this is harmonic motion we can assume there is no damping force
Answer:
its .33
Explanation:
trust me
Johanna makes the table below to organize her notes about centripetal forces.
A 2 column table with 3 rows. The first column is labeled Circular Motion with entries a space station in orbit, a child in a swing, a ball on a string. The second column is labeled Centripetal Force with entries x, blank, blank.
Which type of force should she place in the cell marked X?
tension
gravity
friction
normal
Answer is gravity
Answer:
Gravity, or B should be placed in the Cell labeled “X”
Explanation:
2021, Edge
Gravity is the type of force should she place in the cell marked X.
What is meant by Gravity?Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.Newton came up with the idea that some unseen force must attract the apple towards the Earth. He named this force “gravity”.Gravity is the type of force should she place in the cell marked X.
To learn more about Gravity refer:https://brainly.com/question/9934704
#SPJ2
What is the mechanical energy of a 1-kg ball that is rolling on the ground at 2 m/s?
A) The Ball is on the ground, so the mechanical energy is zero
B) 1J
C) 2J
D) 4J
NEED ANSWER ASAP
I will mark the answer brainliest
I literally copied the quiz
Answer:
c. 2 J
Explanation:
since u just multply it
Suppose you and a friend are standing at opposite ends of a gymnasium and one of you claps will the other person hear the clap at the same time she sees it happen explain why or why not
Answer:
she will not because when it bounces off that is when u hear it
Explanation:
Answer:
No. Your friend will not hear the clap when he/she sees it.
Explanation:
A force of 40 N is applied to a 6 kg box of books. If the frictional force acting on the box is 16 N, and the box was initially at rest, what is the velocity of the box 10 s later? What is the box’s displacement over the 10 s period?
The final velocity is 40 m/s. The box will undergo a displacement of 200 m over the period of 10 s.
Answer:
Explanation:
So the net force acting on the box of books will be the difference of normal force and frictional force acting on the box. As the normal force acting on the box is 40 N and the frictional force is 16 N, then the net force is
Net force = 40 N - 16 N = 24 N.
Also, the mass of the box is given as 6 kg. So as per second law of motion, the acceleration can be found by ratio of net force to mass of the object.
Acceleration of the box = Net force/Mass = 24/6=4 m/s².
Then velocity can be determined using the first equation of motion.
v = u + at =0 + (4× 10 s) = 40 m/s.
So the final velocity is 40 m/s.
Similarly, by using the second equation of motion,
s = ut +1/2 at²
s = (0×10)+(0.5×4×10×10)=200 m
And so, the box will undergo a displacement of 200 m over the period of 10 s.
Describe what is meant by “a constant change of direction”. Identify whether the examples provided
show a constant change of direction when moving. (S8P3a)
a. A merry-go-round spinning in circles.
b. A wind vane swinging around.
c. A kid walking on a straight path.
A constant change of direction implies ongoing alterations in the course of movement, typically involving centripetal acceleration. A merry-go-round and a wind vane demonstrate this, while a kid walking straight does not.
"A constant change of direction" refers to a situation where an object or point is continually altering the course of its movement. In the context of physics and motion, this typically indicates the presence of centripetal acceleration, which is the acceleration directed towards the center of a circular path that keeps an object moving in a curve rather than a straight line.
A merry-go-round spinning in circles displays a constant change of direction due to the rotational movement with each point on the ride continuously changing its direction as it moves in a circle.
A wind vane swinging around also shows a constant change of direction as it repeatedly changes which way it's pointing due to shifting wind directions.
A kid walking on a straight path does not exhibit a constant change of direction because the motion is linear and not curved.
a 2.0 kg mass is lifted 4.0 m above the ground. find the change in gravitational energy
Answer:
78.4 J
Explanation:
Given:
Mass of the object (m) = 2.0 kg
Height or displacement of the mass (h) = 4.0 m
Now, change in gravitational potential energy (ΔU) = ?
Change in gravitational potential energy of an object is the energy stored by the object when it is raised to some height above the reference ground level.
Change in gravitational potential energy of an object of mass 'm' raised to a height 'h' above the ground is given as:
[tex]\Delta U=mgh[/tex]
Where, 'g' is the acceleration due to gravity and has a value of 9.8 m/s².
Now, plug in all the given values and solve for ΔU. This gives,
[tex]\Delta U=(2.0\ kg)(9.8\ m/s^2)(4.0\ m)\\\\\Delta U=78.4\ J[/tex]
Therefore, the change in gravitational potential energy is 78.4 J.
The change in gravitational energy when a 2.0 kg mass is lifted 4.0 m above the ground is [tex]\(78.4 \, \text{J}\)[/tex].
The change in gravitational potential energy [tex](\(\Delta U\))[/tex] when a mass \(m\) is lifted to a height [tex]\(h\)[/tex] is given by the formula:
[tex]\[\Delta U = m \times g \times h\][/tex]
where:
[tex]\(m\)[/tex] is the mass of the object (in kilograms),
[tex]\(g\)[/tex] is the acceleration due to gravity (approximately [tex]\(9.8 \, \text{m/s}^2\)[/tex] on Earth),
[tex]\(h\)[/tex] is the height above the ground (in meters).
Given:
[tex]\(m = 2.0 \, \text{kg}\)[/tex]
[tex]\(h = 4.0 \, \text{m}\)[/tex]
[tex]\(g \approx 9.8 \, \text{m/s}^2\)[/tex]
Plugging in the values:
[tex]\[\Delta U = 2.0 \, \text{kg} \times 9.8 \, \text{m/s}^2 \times 4.0 \, \text{m}\][/tex]
[tex]\[\Delta U = 78.4 \, \text{kg} \cdot \text{m}^2/\text{s}^2\][/tex]
Since [tex]\(1 \, \text{kg} \cdot \text{m}^2/\text{s}^2\)[/tex] is equivalent to [tex]\(1 \, \text{Joule}\) (J)[/tex], the change in gravitational potential energy is:
[tex]\[\Delta U = 78.4 \, \text{J}\][/tex]
if a substance cannot be separated physically or chemically it is?
Answer:
it would be an element as elements can not be broken down into something else
What is the force that holds protons together in the nucleus? (They should repel each other since they are positively charged)
The force is the strong nuclear force.
Explanation:
Every atom has a nucleus and various orbits surrounding it. The protons and neutrons are present in the nucleus while the electrons orbit around the nucleus. Protons are held together in the nucleus by the strong nuclear force. It is also called as the strong force. It holds together the subatomic particles within the nucleus. The nuclear force is the strongest of the four fundamental forces. Although it is the strongest, it can only act over short distances which are nuclear in length.Simple Harmonic Motion
Assignment Acire
Analyzing the Motion of a Spring
At which point(s) is the net force the greatest?
At which points) is the net force zero?
muman
- The net force is greatest at the position of maximum displacement
- The net force is zero when at the equilibrium position
Explanation:
The motion of a spring is a Simple Harmonic Motion, in which the displacement of the end of the spring is given by a periodic function of the form
[tex]x=Asin (\omega t)[/tex]
where A is the amplitude (the maximum displacement), and [tex]\omega[/tex] the angular frequency of the motion.
We can analyze the net force acting on the spring by looking at Hooke's law:
[tex]F=kx[/tex]
where
F is the net force
k is the spring constant
x is the displacement
From the equation, we notice immediately that:
The net force is the greatest when the displacement x is the greates, so at the position in which the spring has maximum compression or stretchingThe net force is zero when the displacement x is zero, so when the spring crosses the equilibrium positionLearn more about forces:
brainly.com/question/8459017
brainly.com/question/11292757
brainly.com/question/12978926
#LearnwithBrainly
Answer:
An illustration of a mass on a vertical spring with a transverse wave showing the position of the mass on the spring will make a transverse wave shape if bouncing up and down and moving horizontally. The shortest spring has the mass at the top of each crest and are labeled A and E respectively. The position where the mass in in the trough of the transverse wave would be labeled C and stretches the spring the farthest. The middle length springs has masses where the equilibrium of the material of the medium containing the transverse wave would be at the equilibrium of the material would be and are labeled B and D.
At which point(s) is the net force the greatest?
A,C, and E
At which point(s) is the net force zero?
B and D
Explanation:
Got it from engenuity
What is unique about Neptune's discovery?
A)It was discovered by Kuiper
B)It was the first planet located through mathematical calculations
C)It was the first planet located through a telescope.
D) It's located right after the asteroid belt.
Please help!!! i will give brainliest *If Right*
Answer:
the answer is
B)It was the first planet located through mathematical calculations
The correct answer to the question is B) It was the first planet located through mathematical calculations. Neptune's discovery is unique because it was the first planet located through mathematical calculations, based on the gravitational effects observed in Uranus' orbit. This innovative approach was a monumental achievement in astronomy.
What is unique about Neptune's discovery? The unique aspect of Neptune's discovery lies in its method. Neptune was the first planet located not by direct observation but through mathematical calculations. This groundbreaking approach marks Neptune's discovery as a significant achievement in the field of astronomy.
The deviation in Uranus' orbit puzzled astronomers. This irregularity was attributed to the gravitational pull of an unknown planet, later identified as Neptune. Following these calculations, Neptune was discovered in 1846, right where it was predicted. This method of discovery, using the principles of gravitational theory and mathematical predictions rather than direct observation or accidental sighting, set Neptune apart from the discoveries of other planets.
Write your question here (Keep it simple and clear to get the best answer)what is the dimensions of angular velocity
Answer:
The dimensions of angular velocity is [tex][T^{-1}][/tex]
Explanation:
We know that linear velocity is equal to the rate of change of linear displacement.
Similarly, in rotational motion, the analogous term for linear velocity is angular velocity.
Angular velocity is defined as the rate of change of angular displacement.
The angular displacement is the measure of the angle rotated by an object about a fixed point or the axis of rotation.
Therefore, the unit of angular displacement is measured in radians. We know that, the radian is a dimensionless quantity. So, its dimension is [tex][M^0L^0T^0][/tex]
Now, time is measured in seconds. So, dimension of time is [tex][M^0L^0T][/tex]
Therefore, the dimensions of angular velocity is given as:
[tex]Angular\ velocity =\frac{Angular\ displacement}{Time}\\\\Dimensions=\frac{[M^0L^0T^0]}{[M^0L^0T]}\\\\Dimensions =[T^{-1}][/tex]
Therefore, the dimensions of angular velocity is [tex][T^{-1}][/tex]
If the energies sound in the device is microphone what is the energy out
Answer:
Microphones are a type of transducer - a device which converts energy from one form to another. Microphones convert acoustical energy (sound waves) into electrical energy (the audio signal). Different types of microphone have different ways of converting energy but they all share one thing in common: The diaphragm.
Explanation:
Think about the process of heating water, the heating and upward motion of hot steam and air, and the spiral spinning. For these events, list each form of energy associated with the heat source, the water, the steam and air, and the spiral.
Kinetic Energy Forms:
-Motion Energy
-Thermal Energy
-Electric Energy
-Vibrational Energy
-Radiant Energy
Potential Energy Forms:
-Gravitational Potential Energy
-Elastic Potential Energy
-Chemical Potential Energy
-Electric Potential Energy
-Magnetic Potential Energy
-Nuclear Potential Energy
The process involves various energy forms. The heat source equates to chemical potential energy, transitioning into thermal energy. The heated water and upward moving steam embody thermal energy, while the latter also impiles kinetic and gravitational potential energy.
Explanation:In the process mentioned:
The heat source that is used to heat the water is displaying chemical potential energy, which undergoes transformation into thermal energy when the heat source is ignited.The hot water itself harnesses thermal energy, which is the energy related to the temperature and internal energy of the water system.Hot steam and air moving upwards is another instance of thermal energy, with the added element of kinetic energy due to the upward motion. The rise of heated air and steam can also be seen as a conversion of thermal energy into gravitational potential energy.The spiral spinning invokes kinetic energy, particularly rotational kinetic energy, to produce the spinning motion. This is a direct result of the interaction between the heated air (thermal energy) and the colder surrounding air.Learn more about Forms of energy here:https://brainly.com/question/29471089
#SPJ12
What is the defenition of mass
Answer:
the total matter contained in a body is called mass