Answer:
a. the biosphere
Explanation:
The biosphere consists of both the living organisms and the non living(abiotic) system which they live in.
In Ptolemy’s Earth-centered model for the solar system, Venus’s phase is never full as viewed from Earth because it always lies between Earth and the Sun. In reality, as Galileo first recognized, Venus is __________.
a. full whenever it lies directly between Earth and the Sun.
b. full whenever it is on the opposite side of the Sun from Earth, although we cannot see the full Venus because it is close to the Sun in the sky.
c. never full because Earth's shadow falls on Venus at the time when it would otherwise be full.
d. never full because the sunlit side of Venus never faces directly toward Earth.
Answer:
The correct answer is B - full whenever it is on the opposite side of the Sun from Earth, although we cannot see the full Venus because it is close to the Sun in the sky.
As geographers use the term, scale tells usa.the weight of a given commodity.b.the intrinsic character of the object or area studied.c.the relationship between earth distance and map distance.d.the length of a degree of longitude along different parallels.
Answer:
Option (C)
Explanation:
A scale is usually defined as the ratio between the distance between two particular places on the map and the actual distance between the two places on the actual ground surface.
It is widely used by the geographers while studying a map, in order to explain the relationship between the map distance and the earth's distance. This scale is mentioned in the map, mostly at the bottom of the map.
For example, a map scale of 1:500000, this means that 1 centimeter on the map is equivalent to 5000 meters = 5 kilometers on the ground surface.
Thus, the correct answer is option (C).
Undulations in the upper (higher elevation)air of the Westerlies are called jet stream disturbances, or _________, and are responsible for bringing variable warm & cold temperatures to mid-latitude (45 degrees and thereabouts) landmasses.
Answer:
Rossby waves
Explanation:
Rossby waves are upper-air waves troposhpere they usually have a wavelengths of range from 4000-6000. Rossby waves are large body of air with fairly uniform charactersitics of temperature and moisture.
At mid-ocean ridges, as two plates diverge solid mantle in the asthenosphere rises toward the surface and begins to melt due to decompression. solid mantle in the asthenosphere rises toward the surface and begins to melt due to the addition of heat. liquid mantle in the asthenosphere rises toward the surface.
Sea-floor spreading is the process that occurs at mid-ocean ridges where tectonic plates diverge. As a result of decreased pressure, the solid mantle from the asthenosphere rises and begins to melt due to decompression and heat, resulting in magma that forms new oceanic crust.
Explanation:The process you are referring to is known as sea-floor spreading, a theory in earth science. At mid-ocean ridges, tectonic plates separate, creating a gap. As this happens, pressure in the asthenosphere decreases, causing the solid mantle to decompress and rise towards the surface. This decompression results in partial melting of the mantle. This molten, or semi-molten rock, known as magma, then rises to fill the gap created by the diverging plates. The magma cools and solidifies to form new oceanic crust. Therefore, the mantle in the asthenosphere rises and begins to melt due to the decompression and addition of heat, not because it is already in a liquid state.
Learn more about Sea-floor spreading here:https://brainly.com/question/12537430
#SPJ12
At mid-ocean ridges, as two tectonic plates diverge, the solid mantle in the asthenosphere rises toward the surface and begins to melt due to decompression.
This process is primarily driven by a decrease in pressure as the plates move apart. As the mantle rises, the reduction in pressure allows it to undergo decompression melting, which occurs because the mantle rock contains volatile substances (such as water) that can form magma when pressure is reduced.
The addition of heat does play a role in the overall temperature of the asthenosphere, but decompression melting is the dominant process responsible for creating magma at mid-ocean ridges.
The heat in the asthenosphere is generally relatively constant, with the major factor causing melting being the reduction in pressure as the mantle material rises closer to the surface.
This results in the formation of molten rock or magma, which can eventually erupt as material at the mid-ocean ridges, creating new oceanic crust.
As tectonic plates move apart at mid-ocean ridges, there is a decrease in pressure on the mantle material beneath. The solid mantle rock in the asthenosphere begins to rise towards the surface. It's important to note that this rising occurs primarily due to the reduction in pressure, not because of an intense increase in temperature.
Learn more about constant:
https://brainly.com/question/32200270
#SPJ12
Our Solar System _________.a. completes one rotation around the center of the Milky Way every 250 million years. b. is held together by the gravitational pulls of Jupiter and Saturn. c. currently consists of nine planets. d. is centrally positioned in the Milky Way Galaxy.
Answer:
The good option is:
.a. completes one rotation around the center of the Milky Way every 250 million years.
Explanation:
Our system, the Solar System , travels in space in its orbit aroud the center of the Milky Way at a speed of 250 km/hour. It is located on the outer regions of the galaxy. The Sun is distant some 26,000 light-years from the center of the galaxy.
The boundary where two plates meet and trenches are formed is called
The boundary where two plates meet and trenches are formed is called a convergent boundary or a subduction zone.
What is boundary where two plates meet and trenches are formed is called?A convergent boundary is a type of tectonic plate boundary where two plates come together and collide. There are three main types of convergent boundaries: oceanic-continental convergence, oceanic-oceanic convergence, and continental-continental convergence.
In an oceanic-continental convergence, an oceanic plate and a continental plate converge. The denser oceanic plate subducts or sinks beneath the less dense continental plate. .
Learn more about subduction zone at https://brainly.com/question/1358208
#SPJ6
In his famous book Principles of Geology, Being an Attempt to Explain the Former Changes of the Earth's Surface, Charles Lyell stated that Earth's geological features were formed by the same currently observable processes taking place. Charles Darwin was greatly influenced by Lyell's work and proposed that the current diversity of life can also be explained by mechanisms that are in operation today, acting over very long periods of time. Why was this a critical understanding for both scientists?A. They both understood that past processes were different and that only currently observable processes could be tested.
B. They both understood that geological processes and biological processes were different from one another, but were observable.
C. They both understood that although past processes could not be scientifically tested, current processes in both geology and biology could be tested.
D. They both understood that if currently observable processes acted in the same manner in the distant past, those processes could then be scientifically tested
Answer:
D. They both understood that if currently observable processes acted in the same manner in the distant past, those processes could then be scientifically tested
Explanation:
The scientists observed and analyzed different processes that have occurred. It was discovered that the processes could be linked together and there is the possibility of studying the processes experimental to prove their existence. In addition, they believed that the processes could be tested scientifically.
Which of the following statements is/are true regarding offsets in the mid-ocean ridge system?
A. Offsets include both inactive and active segments.
B. Segments of a mid-ocean ridge are initially aligned.
C. Transform faults form when different segments spread at different rates.
D. Offsets occur where two plates slide past each other.
E. Transform faults run parallel to the mid-ocean ridge axis.
F. Fracture zones occur where two plates are locally colliding.
Offsets in the mid-ocean ridge system involve both inactive and active segments, transform faults form when different segments spread at different rates, and these faults run parallel to the mid-ocean ridge axis.
Explanation:The correct statements regarding offsets in the mid-ocean ridge system are:
A. Offsets include both inactive and active segments. Offsets can occur in both active and inactive segments of the mid-ocean ridge system. Inactive segments are usually marked by transform faults.C. Transform faults form when different segments spread at different rates. Transform faults are formed when segments of the mid-ocean ridge spread at different rates. These faults allow the plates to slide past each other horizontally.E. Transform faults run parallel to the mid-ocean ridge axis. Transform faults that form as a result of offsets in the mid-ocean ridge system run parallel to the axis of the ridge.Learn more about Offsets in the mid-ocean ridge system here:https://brainly.com/question/31920427
#SPJ3
Recognizing the need for organizations to improve the state of people, the planet, and profit simultaneously if they are to achieve sustainable, long-term growth is known as sustainability. social responsibility. the marketing concept. the triple bottom line.
Answer:
Corporate social responsibility (CSR) is the investment that companies voluntarily make to obtain improvements in their social, economic and environmental areas.
From the point of view of the marketing of the company, the investment is made to improve its competitiveness, since its image is strengthened as certain certifications are obtained, which is "sold" by the firm as added value.
The triple balance is the system by which the performance of the company in these areas is valued. Currently, there are numerous CSR evaluation systems, with standards that differ in accordance with the nature of the companies.
Explanation:
Hello!
According to the 1987 Bruntland report, sustainability implies "the satisfaction of current needs without compromising the ability of future generations to meet theirs".
Applied to companies, good performance in CSR seeks to maximize its economic benefit and its environmental responsibility, as well as minimize its negative externalities.
Success in your homework!
Density is a key component in the behavior of Earth materials and is especially important in understanding important aspects of the plate tectonics model. Describe three different ways that density and/or density differences play a role in plate tectonics.
Answer:
Density is one of the most factors that play a key role in plate tectonic activities. Some of the ways in which density is important in the field of plate tectonics are as follows-
The convergent plate boundaries are responsible for the creation of a subduction zone, where the high-density lithospheric plate subducts below the less dense one. It is because the heavier plate is comprised of heavy minerals thereby forming heavier rocks as a result of which its density increases. Due to these differences in density, there occurs a subduction zone. The divergent plate boundary forms where two plates move away from one another. This type of plate motion is responsible for the eruption of magma on the seafloor. As the plates diverge, the lithosphere becomes eventually thin, and with more progressive spreading, the magma comes out to the seafloor. This is because the hot magma is less dense, and forms convection cells as they rise upward. This is how the density helps in the upwelling of magma at the mid-oceanic ridge in a divergent plate boundary. When there collide two plates of equal densities, then it gives rise to the formation of huge mountains, because neither of them is heavy to get sink. So it uplifts the crust, forming a sandwich-type pattern.The key component in the behavior of Earth materials is:
DensityPlate TectonicsThis refers to the scientific theory which explains how the major landforms of earth moved over time from one place to the another.
With that in mind, we can see that the different ways through which density plays a role in plate tectonics includes:
Convergent plate boundariesDivergent plate boundariesRead more about plate boundary here:
https://brainly.com/question/7589968
Which events occur after Earth’s surface experiences weathering? Check all that apply. a. Sediments settle, forming a hill. b. Wind carries sediments to a new location. c. Sediments fall from the air to the ground. d. Moving water breaks sediments into pieces. e. Surface materials wear down into sediment.
Answer:
A, B, C
Explanation:
After the earth surface experience weathering, sediments are carried by the wind to new locations and these sediments fall from the sky and settle forming hills.
Answer:
Sediments settle, forming a hill.
Wind carries sediments to a new location.
Sediments fall from the air to the ground.
When a metamorphic rock exhibits a layered or banded appearance, it is said to exhibit a(n) __________ texture.
Answer:
Explanation:
When a metamorphic rock exhibits a layered or banded appearance, it is said to exhibit a foliated texture.
In geology, foliation texture is a texture that has layerings in a repititive manner, usually in metamorphic rocks. Each layer vary in thickness. It can be as thin as 0.05cm or more than a meter in thickness.
Since we know the difference in height between these two locations, using the atmospheric lapse rate equation provided above, predict the temperature difference between the two locations. (Pay attention to units!. Round to 2 decimal places)
Answer: a) Difference between the two mean temperatures = 16°C
b) The temperature difference between the two locations, according to the lapse rate equation is 23.45°C
c) The true temperature difference is lower than that predicted by the temperature lapse rate formula.
Explanation: a) Difference between the two mean temperatures = 25 - 9 = 16°C
b) The environmental lapse rate (ELR), is the rate of decrease of temperature with altitude in the stationary atmosphere at a given time and location.
The atmospheric temperature lapse rate as defined by the International Civil Aviation Organization (ICAO) for an International Standard Atmosphere is = 6.5°C/km
For this question, distance between the two points is 3613 m = 3.613 km
Temperature difference = 6.5°C/km × 3.613km = 23.45°C.
c) The true difference, 16°C, is less than the predicted difference, 23.45°C.
QED!
Earthquakes, volcanoes, and landslides can displace large volumes of water in the ocean and trigger which of the following natural disasters? a. Mass wasting b. Tsunamis c. Lahars d. Tornadoes
Answer: B Tsunamis
Explanation: tsunami is generated by displacement of large volume of water which the causes of the displacement can be earthquake, volcanoes, landslide and other underwater explosion. Tsunami is refered to as tidal waves
At an astronomical conference, an astronomer gives a report on a star that has recently begun to interest astronomers because of hints that it may have a planet around it. In his report the astronomer gives the average speed with which this star is moving away from the Sun. How did the astronomer measure this speed?
By looking at the Doppler shift in the lines of the star's spectrum. T/F
Answer:
True
Explanation:
Hello!
Doppler spectroscopy is a measurement system used to estimate the radial velocity of a star.
To make this measurement, a series of observations are made on the spectrum of light emitted by a star. Then, it is detected if the characteristic wavelengths of the light spectrum vary, which may indicate that the radial velocity of the star varies. This situation can be caused by the presence of planets in the orbit of that star.
If a planet is found, it can determine its mass by studying the combinations in the radial velocity of the star.
Success in your homework!
What is the graticule? a. another name for a map projection b. the name given to Earth’s latitude lines c. another name for a globe the name given to Earth’s longitude lines d. a name given to the system of lines used to locate points on Earth’s surface
Answer:
I would say D. a name given to the system of lines used to locate points on earths surface
Explanation:
A quick google search of a graticule explained that it is a network of lines representing meridians and parallels on which a map or plan can be represented.
The graticule is a name given to the system of lines used to locate points on Earth’s surface. It consists of latitude lines (parallels) and longitude lines (meridians). The graticule is important for navigation and determining coordinates.
Explanation:The graticule is a name given to the system of lines used to locate points on Earth’s surface. It consists of the latitude lines (also known as parallels) which run horizontally around the Earth and the longitude lines (also known as meridians) which run vertically from the North to the South pole. The graticule is an important tool for navigation and determining the coordinates of specific locations on the Earth.
Learn more about graticule here:https://brainly.com/question/36209929
#SPJ6
Sedimentary rock is formed ________.as sediment materials are pressed together and infiltrated by minerals by vaporization of organic material by magma by the heating of igneous rock by the heat of the core by the cooling of igneous rock from the melting of metamorphic rock
Answer:
Option (1)
Explanation:
Sedimentary rocks are usually defined as those rocks where the sediments are deposited, thereby undergone compaction and lithification. These rocks are comprised of fossils at different places. It is because they are soft sediments and the fossilized materials are preserved in it.
The sediments or the broken rock fragments are formed due to the combination of weathering and erosion process, and these sediments are then transported to some other places by the agents such as wind, water, and ice.
After these sediments are deposited in a new place they are subjected to compaction and often minerals are embedded on it, and after solidification, gives rise to the formation of sedimentary rocks.
Thus, the correct answer is option (1).
The UTM coordinates of point A are 500,000 meters East, 2,000,000 meters North, Zone 17 North. The coordinates of point B are 300,000 meterThe UTM coordinates of point A are 500,000 meters East, 2,000,000 meters North, Zone 17 North. The coordinates of point B are 300,000 meters East, 3,000,000 meters North, Zone 18 North. Which point is associated with the least projection-induced scale error?s East, 3,000,000 meters North, Zone 18 North. Which point is associated with the least projection-induced scale error?
A) Point A
B) Point B
C) The error at both points is 1 part in 2500
Answer:
B
Explanation:
The value of scale error is always zero along the two standard lines that run parallel to the Central Meridian. Both lines are at a distance of 180,000 meters from the Central Meridian, in east and west direction, respectively. As the distance from the standard lines increases, Scale Error also increases. As the Eastern distance of point A is higher than that of point B it has higher scaler error (The scale factor at the central meridian is 0.9996). Hence, point B has least scale error.
Divergent plate boundaries are where the lithosphere is being rifted apart. What fills in the area of the rift?
Answer:
Magma fills those area forming a new crust eventually.
Explanation:
Divergent plate boundary is where tectonic plates move apart. The divergent boundary occur between oceanic crusts or continental crusts but it is more prevalent in the oceanic crust.
The oceanic crust where most divergent boundary occurs introduce aesthenosphere material to the sea floor causing a formation of new crust.
When plates moves apart, through the oceanic ridges molten magma are released to form a new crust. The magma creeps through cracks and fissures and eventually get exposed to the surface. The rapid cooling of this magma forms mostly extrusive igneous rocks.
Rift are linear area formed as result of tectonic plates moving apart. Rifts are a kind of valley form when their is extensional forces. As the plates rift apart the valley are formed , aesthenosphere materials like molten magma fills in the rift to form a new crust after rapid cooling.
The pictures above show divergent boundaries and how rift are formed in a divergent boundary.
The GAIA spacecraft is capable of measuring parallax angles as small as about 0.00002 arcseconds (20 microarcseconds). Based on this fact, GAIA should in principle be able to measure the distances of stars located __________.
Answer:
It will be able to measure the distances of stars located across the Milky Way galaxy and outside it up to a distance of 50 Kiloparsec.
Explanation:
1 arcsecond is 1/parsec.
0.00002 arcsecond is 1/0.00002 parsec = 50,000 parsecs or 50 Kiloparsecs.
The shortest distance to the edge of the Milky Way is about 8 Kiloparsec and the farthest is about 24 Kiloparsec. So at this parallax angle, it can measure the distances of stars across the Milky Way galaxy. Any stars within a distance of 50 Kpc will be measured by GAIA. However, since the closest galaxy to the Milky Way is about 770 Kpc away, GAIA will be unable to measure any stars in another galaxy.
Final answer:
The GAIA spacecraft can accurately measure parallax angles as small as 20 microarcseconds, enabling measurement of stellar distances up to about 30,000 light-years away, far beyond the 300 light-year capability of its predecessor Hipparcos.
Explanation:
The GAIA spacecraft is an exceptional tool for measuring parallax angles to an incredible precision of about 20 microarcseconds, far exceeding the capabilities of its predecessor, Hipparcos. Given this precision, GAIA can measure the distances of stars much farther than ground-based observations could previously achieve. In particular, with an accuracy of a few microarcseconds, GAIA extends our ability to accurately measure stellar distances up to about 30,000 light-years away, covering nearly a third of the galactic disk. This is significantly further than the approximately 300 light-year extent possible with Hipparcos, illustrating GAIA's remarkable improvement in the field of astrometry.
In 2001, scientists announced that they had discovered a species of dinosaur called Albertaceratops nesmoi that they believed to be an ancestor of another better-known dinosaur species. How would scientists have determined that this newly discovered species was related to other known species of dinosaur? A) Scientists made careful observations of behavioral patterns. Eliminate B) The DNA mutation rates for both species was calculated and compared. C) Scientists made a detailed analysis of the fossilized bones of each species. D) The enzyme activity of each species was studied to determine similarities in metabolism.
Answer:
C) Scientists made a detailed analysis of the fossilized bones of each species.
Explanation:
Scientists made a detailed analysis of the fossilized bones of each species. This detailed analysis of the fossilized bones provided scientists with direct physical evidence of the similarity of the two species.
The environmental lapse rate typically decreases at night becausea. the surface cools more slowly than the air aloft. b. the surface absorbs less longwave radiation than the air aloft. c. the surface cools more rapidly than the air aloft. d. the surface absorbs more longwave radiation than the air aloft.
Answer:
C.The surface cools more rapidly than the air aloft
Explanation:
At night surface close to the ground becomes cool,the air above this surface becomes warm as a result of temperature inversion.
Sea stars are broadcast spawners: They release their gametes into the water without courtship. Which of these reproductive isolation mechanisms is most likely affecting sea stars?
a. behavioral isolation or mechanical isolation
b. gametic isolation or temporal isolation
c. habitat isolation
Answer:
b. gametic isolation or temporal isolation
Explanation:
Gametic isolation is a type of prezygotic barrier where the gametes (egg and sperm) come into contact, but no fertilization takes place.
Temporal isolation - separation in time such that reproduction occurs at different times of the day, or season or even years. For example, consider the time of day when Evening primrose or Morning glory flowers. The Western spotted skunk mates late summer, whereas the eastern spotted skunk mates in late winter.
What was the main reason Wegener’s continental drift hypothesis was rejected? He could provide only illogical explanations for the movement of the continents. He was not well respected by other scientists. His evidence was incorrect. He could not provide a wholly acceptable explanation for the movement of the continents.
Wegener could not provide a wholly acceptable explanation for the movement of the continents.
Explanation:
Alfred Wegener is the person that developed and promoted the continental drift theory. Despite him having developed the basic idea behind the process, as well as managing to find several clues to support it, his ideas were not accepted by the other scientists and he found it extremely hard to gain support. The main reason as to why this was the case was that he didn't really had wholly acceptable explanation about the movement of the continents.
Everything that Wegener provided as evidence was correct, and it was proving a point. The problem was that he still lacked explanation for the driving force of this process, nor did he had any proof about it, and that was the basis for all other things. Every clue that he had was the final product, but no one could explain as to how that actually happened.
Some of Wegener's evidence were:
identical fossils on different continentsmatching coastlinesspreading zones matching rock strata on different continentsLearn more about the continental drift theory https://brainly.com/question/5002949
#learnwithBrainly
Wegener's continental drift hypothesis was rejected mainly because he could not provide a satisfactory explanation for how the continents moved. His suggestion that continents moved over time was unprecedented and lacked the support of a convincing underlying mechanism.
Explanation:The primary reason Wegener's continental drift hypothesis was rejected was that he could not provide a wholly acceptable explanation for the movement of the continents. Alfred Wegener, a German meteorologist, proposed the idea of continental drift in 1912, suggesting that continents moved across the surface of the Earth over thousands of years. However, he lacked a convincing mechanism to explain this movement. In Wegener's time, the scientific community did not have the advances of seabed mapping or the concept of sea-floor spreading that would later support the theory of plate tectonics. His proposal was thus met with significant skepticism, as he could not satisfactorily explain how the continents moved.
Learn more about Continental Drift Hypothesis here:https://brainly.com/question/33450863
#SPJ6
Read the following excerpt from The Works of John Playfair (1822). What glacial landform is being described?
"For the moving of large masses of rock, the most powerful engines without doubt that nature employs are the glaciers….[Rock] fragments they gradually transport to their utmost boundaries, where a formidable wall ascertains the magnitude, and attests the force, of the great engine by which it was erected."
A) Arête
B) Drumlin
C) Horn
D) Moraine
Answer:
Option (D)
Explanation:
A moraine is usually defined as a glaciated landform that is formed by the accumulation of sediments and the moving glaciers. It is comprised of well-sorted sediment particles, which are being shaped during its time of transportation.
There are three distinct types of moraines, namely-
Lateral moraine- These are found to be deposited along the sides of the glacier Medial moraine- This type of moraines joins the two separate glaciers Terminal moraine- This type of moraine is found at the end of the glacier. It is located at the furthest distance from the main glaciers.Thus, the correct answer is option (D).
Motion on _________ faults results in a fault scarp?
Answer:
Reverse fault, Dip-Slip fault, Normal fault, Thrust fault
Explanation:
A Fault scarp is usually defined as a step-like feature that occurs on the ground surface, depicting the movement of one block upward relative to the other, along a fault line.
It is caused by the following types of faults, namely:
Reverse fault Dip-Slip fault Normal fault Thrust faultThe reverse and the thrust faults are formed due to the compressional stress acting on it from both sides, resulting in the movement of the blocks along the fault line creating a fault scarp.
Similarly, the normal fault and the Dip-slip fault also generates a fault scarp, where the fault is formed because of the extension of the crust.
Answer:Normal fault
Explanation:
Which of the following headlines from possible news stories relate(s) to Earth Science?
Choose one or more:
a. Ancient artifacts found in Mayan Temple reveal what life was like for the wealthy Mayans
b. EPA under the microscope after 2015 Colorado Gold King Mine spill
c. Scientists search genome to make cancer treatments more effective
d. NASA prepares for launch of James Webb telescope, which will give us new insights into outer space
e. New Ebola vaccine shows promising results in human clinical trials
Final answer:
The headline pertaining to Earth Science is about the EPA's scrutiny after the 2015 Colorado Gold King Mine spill, which deals with environmental impact and regulation.
Explanation:
The headline that relates to Earth Science is:
b. EPA under the microscope after 2015 Colorado Gold King Mine spillThis headline indicates an environmental issue that falls under Earth Science, specifically related to the impact of human activities on the environment, which is a concern for the Environmental Protection Agency (EPA). Such an event relates to the study of how pollutants affect ecosystems, the soil and water quality, and environmental health and regulations.
Which of the following is a sink?
A. fossil fuels such as coal, oil, and gas
B. a location for carbon dioxide storage
C. the origination point of a gas, such as a volcano
D. the origination point of a gas, such as the atmosphere
Answer:
Sink is Option A: fossil fuels such as coal, oil, and gas.
Explanation:
The given option B, which is a location for carbon dioxide storage is not a sink. Neither is a volcano, Option C, which is made of hot molten rock erupt from Earth's surface or atmosphere, Option D a sink.
Fossils fuels such as coal, oil and gas are sink. Coal forms are formed when dead plants sink to the bottoms of swamps. The organic matter slowly becomes peat which gradually becomes coal, after a lot of pressure is crated on it. The other kinds of fossil fuels, oil and natural gas, are not rocks. They are also formed when tiny creatures get buried deep inside and over years, sediments change organic mater into natural gas (given enough pressure on them).
In what ways did networks of interaction in the Western Hemisphere differ from those in the Eastern Hemisphere?
What is the primary function of earth's atmosphere A- to trap heat from the sun B- to shield the planet from harmful radiation C- to disintegrate space derbis before it reaches the surface D- all of the above
Answer:
D
Explanation:
The primary function of the earth's atmosphere is to protects the earth from the harmful rays and acts a shield made of tiny particles.
Final answer:
B- to shield the planet from harmful radiation.
Explanation:
The primary function of Earth's atmosphere is to act as a protective shield, primarily by absorbing and scattering the sun's ultraviolet (UV) radiation. This protective layer prevents most of the harmful UV radiation from reaching the Earth's surface, thereby safeguarding living organisms. While the atmosphere does play a role in regulating temperature (by trapping some heat), and it can interact with space debris, its central function is the protection of the planet from harmful radiation. Therefore, option B, "to shield the planet from harmful radiation," is the most accurate description.