Some friends are trying to make wine in their basement. They've added yeast to a sweet grape juice mixture and have allowed the yeast to grow. After several days they find that sugar levels in the grape juice have dropped, but there's no alcohol in the mixture. The most likely explanation is that ______.

Answers

Answer 1

Answer:

The yeast respired aerobically

Explanation:

The expectation here was that the yeast was going to put the sugar in the grape juice through fermentation, which is an anaerobic process that results in alcohol as one of the products. However since no alcohol was found in this particular example, it is fair to assume that maybe there was oxygen in teh muxture and therefore the yeast respired aerobically, producing water and carbon dioxide as products.


Related Questions

During an experiment, 575 mL of neon gas at 101 kPa were compressed in a cylinder to a volume of 144 mL.

What was the new pressure of the gas, if the temperature remained constant?

Answers

Answer:

403.3 kPa is the new pressure

Explanation:

This problem is solved by this formula:

P₁ . V₁ = P₂ . V₂

101kPa . 575 mL = P₂ . 144mL

(101kPa . 575 mL) / 144 mL = P₂

403.3 kPa = P₂

Final answer:

Using Boyle's Law, the new pressure of neon gas compressed from 575 mL at 101 kPa to 144 mL, with temperature held constant, is found to be 403.125 kPa.

Explanation:

The student asked for the new pressure of neon gas that was compressed from 575 mL at 101 kPa to a volume of 144 mL, given that the temperature remained constant. This type of problem involves ideal gas behavior and can be solved using Boyle's Law, which states that for a given mass of gas at constant temperature, the volume of the gas is inversely proportional to its pressure (P₁V₁ = P₂V₂).

Starting with the initial conditions:

Initial volume (V₁) = 575 mL

Initial pressure (P₁) = 101 kPa

And the final condition:

Final volume (V₂) = 144 mL

Since temperature remains constant, we can calculate the final pressure (P₂) using the formula:

P₂ = (P₁* V₁) /V₂

Substitute the given values into the equation:

P₂ = (101 kPa* 575 mL) \/ 144 mL = 403.125 kPa

Hence, the new pressure of the neon gas after compression is 403.125 kPa.

When an ionic compound such as sodium chloride (NaCl) is placed in water, the component atoms of the NaCl crystal dissociate into individual sodium ions (Na+) and chloride ions (Cl-). In contrast, the atoms of covalently bonded molecules (e.g., glucose, sucrose, glycerol) do not generally dissociate when placed in aqueous solution. Which of the following solutions would be expected to contain the greatest number of solute particles (molecules or ions)?

Answers

Answer: solutions that would be expected to contain the greatest number of solute particles (molecules or ions) is

1 L of 1.0 M NaCl

Classify these substances? More than one answer may apply in each case.
N 2 solution heterogeneous mixture homogeneous mixture element compound pure substance
O 2 pure substance homogeneous mixture solution heterogeneous mixture element compound
N 2 O compound heterogeneous mixture element homogeneous mixture solution pure substance Air
(mostly N 2 and O 2 )
homogeneous mixture heterogeneous mixture solution pure substance element compound

Answers

Answer:

N2 element, pure substance

O2 element, pure substance

N2O Compound, pure substance

Air  (mostly N2 and O2 ) homogeneous mixture

Explanation:

N2, Nitrogen is known as the chemical element that is characterized by having atomic number 7 and that is symbolized by the letter N, in its molecular version, it is recognized as N2.

O2, Oxygen is the chemical element of atomic number 8, this molecular form is composed of two atoms of this element.

A chemical element is a type of matter, consisting of atoms of the same class.

N2O, Nitrous oxide is formed by the union of two molecules of nitrogen and one of oxygen, which is considered a chemical compound since it is a substance formed by the chemical combination of two different elements of the periodic table.

A pure substance is one that cannot change state or divide into other substances, except for a chemical reaction.

Air (mostly N2 and O2 ),  it is a homogeneous mixture of gases that constitutes the earth's atmosphere. A homogeneous mixture is a type of mixture in which its components are not distinguished and in which the composition is uniform and each part of the solution has the same properties.

Final answer:

Substances can be classified based on their composition and uniformity: N2 and O2 are elements and pure substances, N2O is a compound and a pure substance, and air is a homogeneous mixture or solution.

Explanation:

When classifying substances, we take into account their composition and uniformity. Here are the classifications for the mentioned substances:

N2 (Nitrogen) is an element and a pure substance since it is composed of only one type of atom.

O2 (Oxygen) is also an element and a pure substance, with two oxygen atoms bonded together.

N2O (Nitrous Oxide) is a compound as it is made up of two different elements, nitrogen and oxygen, in a fixed ratio and a pure substance due to its uniform composition.

Air, which is mostly made up of Nitrogen (N2) and Oxygen (O2), is a homogeneous mixture or solution because the composition is uniform throughout, and it is a mixture of multiple gases.

Learn more about Substance Classification here:

https://brainly.com/question/28508111

#SPJ6

Liquid 1 reacts with Liquid 2, producing a solid and a gas. Using this scenario, which supports the law of conse
mass?
mass of Liquid 1 + mass of solid = mass of Liquid 2 + mass of gas
mass of Liquid 1 - mass of solid = mass of Liquid 2-mass of gas
mass of Liquid 1 - mass of Liquid 2 = mass of solid + mass of gas
mass of Liquid 1 + mass of Liquid 2 = mass of solid + mass of gas

Answers

Answer:

The answer to your question is the fourth one.

Explanation:

From the description, we know that the reactants are two liquids and the products are a solid and a gas.

The first option is incorrect because it mentions that the reactants are one liquid and solid.

The second option is also incorrect for the same reason as the first one and one of the products must be a solid.

The third option is incorrect besides there are two liquids in the reactants and  a solid and gas in the liquids there is a minus sign that is not possible.

The fourth option is the correct one.

Select the statements that best describe the properties of an intramolecular sn2 reaction mechanism.

Answers

Final answer:

Intramolecular Sn2 reaction is a bimolecular, second-order, elementary reaction. It involves a single, concerted step in which a nucleophile attacks the substrate, leading to a transition state, and then to expulsion of a leaving group. The stereochemistry of the molecule is usually inverted at the reaction centre.

Explanation:

To best describe the properties of an intramolecular Sn2 reaction mechanism, we can say that it's a bimolecular reaction, which means it involves two reactant species. In this case, the reaction mechanism involves a single, concerted step where a nucleophile attacks the substrate, leading to a transition state and finally the expulsion of a leaving group. This makes Sn2 a type of elementary reaction.

In these reactions, the rate is dependent on the concentration of both reactants, leading to a second-order rate law. Further, the rate-determining step (the slowest in the mechanism) for an Sn2 reaction is the single concerted step itself. One important aspect to remember about Sn2 mechanisms is the stereochemical alteration that takes place, typically resulting in inversion of configuration at the reaction centre.

Learn more about Sn2 reaction here:

https://brainly.com/question/34676424

#SPJ11

The intramolecular SN2 reaction mechanism is a bimolecular and concerted process characterized by inversion of configuration at the reaction center, second-order kinetics, and sensitivity to steric hindrance.

The intramolecular SN2 reaction mechanism is characterized by several distinct properties. Firstly, it is a bimolecular reaction, meaning the rate of the reaction depends on the concentration of two reactants: the nucleophile and the electrophile. Secondly, the reaction proceeds via a concerted process where bond-forming and bond-breaking occur simultaneously, leading to an inversion of configuration at the carbon center where the substitution takes place.

Lastly, the SN2 mechanism exhibits second-order kinetics, as the reaction rate depends on the concentration of both the nucleophile and the electrophile. It is important to note that SN2 reactions are sensitive to steric hindrance; bulky groups near the reactive site can inhibit the reaction by limiting the nucleophile's access to the electrophile.

Which combination of formula, IUPAC name, and common name below is incorrect? Formula IUPAC Name Common Name (a) CHCl3 trichloromethane chloroform (b) CCl4 tetrachloromethane carbon tetrachloride (c) C6H5I iodobenzene phenyl iodide (d) CH3Cl chloromethane methyl chloride (e) CH2Cl2 dichloromethane methene chloride

Answers

Answer:

option (e), dichloromethane, methene chloride

Explanation:

(a)  [tex]CHCl_3[/tex]

Common name:  chloroform

IUPAC name: one carbon atom, therefore, root word is meth.

Its is saturated compounds, so add ane after root word.

Three chlorine atoms are present.

Therefore, IUPAC name: Trichloromethane

(b)  [tex]CCl_4[/tex]

Common name:  Carbon tetrachloride

IUPAC name: one carbon atom, therefore, root word is meth.

Its is saturated compounds, so add ane after root word.

Four chlorine atoms are present, chlorine atoms are named as prefixes.

Therefore, IUPAC name: tetrachloromethane

(c)  [tex]C_6H_5I[/tex]

Common name: Phenyl iodide

IUPAC name:

The given compound is an aryl halides. Aryl haildes are named as haloarenes. The prefix halo is placed before aromatic hydrocarbon. Here, prefix is iodo and aromatic hydrocarbon is benzene.

Therefore, IUPAC name of the compound is iodobenzene.

(d)  [tex]CH_3Cl[/tex]

Common name:  Methyl chloride

IUPAC name: one carbon atom, therefore, root word is meth.

Its is saturated compounds, so add ane after root word.

One chlorine atom is present.  

Therefore, IUPAC name: chloromethane

(e)  [tex]CH_2Cl_2[/tex]

Common name: Methylene chloride

IUPAC name: one carbon atom, therefore, root word is meth.

Its is saturated compounds, so add ane after root word.

Two chlorine atoms are present, chlorine atoms are named as prefixes.

Therefore, IUPAC name: dichloromethane.

Therefore, the correct option is option (e), dichloromethane, methene chloride

Characteristics of this mineral: hardness of 3, three directions of cleavage (cleaves into rhombs), partially transparent, effervesces with dilute HCl without being pulverized into a fine powder.

Answers

Answer:

Calcite

Explanation:

Calcite is a mineral formed by calcium carbonate (CaCO3), class 05 of the Strunz classification, the so-called carbonate and nitrate minerals.

All members of this group crystallize in the trigonal system, have a perfect rhombohedral cleavage and exhibit a strong double refraction in transparent rhombohedra.

It presents a variety of shapes and colors. It is characterized by its low hardness, 3 on the Mohs scale, and by its high reactivity even with weak acids.

The best property to identify calcite is the acid test, since this mineral produces effervescence with acids. The reason for this is the following reaction:

CaCO3 + 2H + → Ca2+ + H2O + CO2 (gas)

The molecule that carries an amino acid to the ribosome for incorporation into a protein is ________.

Answers

tRNAs (transfer RNAs) carry amino acids to the ribosome. They act as "bridges," matching a codon in an mRNA with the amino acid it codes for.

Over time, Hinduism has become/is becoming Select one: a. less homogeneous. b. more localized. c. more homogeneous. d. more racialized.

Answers

Answer:

d. Localized.

Explanation:

You posted this question in the chemistry section. The whole exercise requires you to understand the terms in a chemical context. So let's look at the three terms: homogeneous, localized, and radicalized.

Homogeneous

A chemical substance is said to be homogeneous if the chemical composition is the same throughout. It means the substance must have the same states. For example, a mixture of undiluted orange juice forms a homogeneous solution once it is diluted in water. It means that there is perfect mixing to have a uniform liquid state.

Localized

The terminology is often applied to atoms or chemical structures, particularly metals and acids. For example, atoms have localized electrons in the orbitals. It means that the electron orbits in the region for 95 % of its time. Localized means belonging to one region. This applies to the religion.

Radical

The term applies to highly reactive atomic species, normally called ions. These elements seek electrons and are highly "reactive." The ions are called radicals in this sense.

The interactions between water molecules and other non-water molecules through hydrogen bonding is known as ____________________________.

Answers

Answer: adhesion

Explanation:

Cohesion is the attraction between similar molecules. Example: Force of attraction between water molecules.

Thus hydrogen bond formed between the molecules of water due to the development of partial negative charge on oxygen and partial positive charge on hydrogen is cohesion.

Adhesion is the attraction between different molecules. Example: Force of attraction between HCl and water.

The hydrogen bond formed between H of HCl and O of water due to developments of partial positive and partial negative charge respectively is adhesion.

Mathematically combine the three given reactions so that they sum to give a balanced chemical equation describing the production of propane C3H8(g), from its elements, C(s.graphite) and H2lg). Show your intermediate steps. For example, if you must reverse reaction (c), enter the reverse in the appropriate answer box; if you multiply reaction (a) by 2, enter the updated equation in the corresponding answer box. Make sure to enter the overall balanced equation at the bottom (a) C3Hg(g)+502C2+H2O0) (b) C(s)+02(g)> CO2(g) (c) H2(«)+ 7o(Hod)

Answers

Answer and Explanation

The final reaction is the production of propane from Carbon and Hydrogen.

3C (s) + 4H2 (g) ---> C3H8 (g)

So, reverse eq. A,

3CO2 (g) + 4H20 (l) ---> C3H8 (g) + 502 (g)

Add 3 × eq. B,

3C (s) + 3O2 (g) ----> 3CO2 (g)

Add 4 × eq. C,

4H2 (g) + 2O2 (g) ---> 4H20 (l)

Writing them together,

3CO2 (g) + 4H20 (l) ---> C3H8 (g) + 502 (g)

+ 3C (s) + 3O2 (g) ----> 3CO2 (g)

+ 4H2 (g) + 2O2 (g) ---> 4H20 (l)

------------------------------------------------------------

3CO2 (g) + 4H20 (l) + 3C (s) + 3O2 (g) + 4H2 (g) + 2O2 (g) ---> C3H8 (g) + 502 (g) + 3CO2 (g) + 4H20 (l)

The compounds that exist on both sides cancel out and we're left with

3C (s) + 4H2 (g) ---> C3H8 (g)

So, mathematically, the final reaction can be written as:

(-eq. A + 3(eq. B) + 4(eq. C))

-A+3B+4C = 3C (s) + 4H2 (g) ---> C3H8 (g)

QED!

[tex]\[{3\text{C(s, graphite)} + 4\text{H2(g)} \rightarrow \text{C3H8(g)} + 5\text{O2(g)}} \][/tex]

This balanced equation shows the production of propane (C3H8) from its elements carbon and hydrogen gas.

To combine the given reactions to form the balanced chemical equation describing the production of propane (C3H8) from its elements carbon (C, as graphite) and hydrogen (H2), let's follow these steps:

Given reactions:

(a) [tex]\( \text{C3H8(g)} + 5\text{O2(g)} \rightarrow 3\text{CO2(g)} + 4\text{H2O(g)} \)[/tex]

(b) [tex]\( \text{C(s, graphite)} + \text{O2(g)} \rightarrow \text{CO2(g)} \)[/tex]

(c) [tex]\( \text{H2(g)} + \frac{1}{2}\text{O2(g)} \rightarrow \text{H2O(g)} \)[/tex]

We need to manipulate these reactions to combine them into one overall balanced equation that shows the formation of propane (C3H8) from carbon and hydrogen.

Step-by-Step Combination:

1. Reverse Reaction (a):

[tex]\( 3\text{CO2(g)} + 4\text{H2O(g)} \rightarrow \text{C3H8(g)} + 5\text{O2(g)} \)[/tex]

This is the reverse of reaction (a), which is necessary to show the formation of propane.

2. Multiply Reaction (b) by 3:

[tex]\( 3\text{C(s, graphite)} + 3\text{O2(g)} \rightarrow 3\text{CO2(g)} \)[/tex]

Multiply reaction (b) by 3 to balance the carbon atoms with the propane formation reaction.

3. Multiply Reaction (c) by 4:

[tex]\( 4\text{H2(g)} + 2\text{O2(g)} \rightarrow 4\text{H2O(g)} \)[/tex]

Multiply reaction (c) by 4 to balance the hydrogen atoms with the propane formation reaction.

4. Combine the Reactions:

Now, add the balanced reactions (reverse of (a), multiplied (b), and multiplied (c)) to get the overall balanced equation for the formation of propane:

[tex]\( 3\text{C(s, graphite)} + 3\text{O2(g)} + 4\text{H2(g)} + 2\text{O2(g)} \rightarrow 3\text{CO2(g)} + 4\text{H2O(g)} + 5\text{O2(g)} \)[/tex]

5. Simplify the Equation:

Combine like terms (oxygen on both sides):

[tex]\( 3\text{C(s, graphite)} + 3\text{O2(g)} + 4\text{H2(g)} \rightarrow 3\text{CO2(g)} + 4\text{H2O(g)} + 5\text{O2(g)} \)[/tex]

A chemist began with 61.5 grams of naclo3.After collecting and drying the product, 30 grams of nacl was obtained. what was the theoretical yield of nacl

Answers

Answer:

33.78 g

Explanation:

NaClO3 decomposes to NaCl and O2 by this reaction:

2NaClO3 --> 2NaCl + 3O2

Let's determines the mole of chlorate we used (mass / molar mass)

61.5 g / 106.45 g/mol = 0.578 moles.

Ratio is 2:2, so x amount of chlorate will produce x amount of chloride. In conclussion we made 0.578 moles of NaCl from 0.578 moles of chlorate. Let's convert the moles to mass:

0.578 mol . 58.45g/1mol = 33.78 g

That is the theoretical yield of NaCl.

The reaction (CH3)3CBr + OH- (CH3)3COH + Br- in a certain solvent is first order with respect to (CH3)3CBr and zero order with respect to OH-. In several experiment, the rate constant k was determined at different temperatures. A plot of ln(k) versus 1/T was constructed resulting in a straight line with a slope value of –1.10 x 104 K and a y-intercept of 33.5.

Answers

Answer and Explanation:

The rate constant (K) is related to activation energy (Ea), frequency factor (A) and temperature (T) in Kelvin by the equation

R = molar gas constant

K = A(e^(-Ea/RT))

Taking natural log of both sides

In K = In A - (Ea/RT)

In K = (-Ea/R)(1/T) + In A

Comparing this to the equation of a straight line; y = mx + c

y = In K, slope, m = (-Ea/R), x = (1/T) and intercept, c = In A

a) From the question, m = (-Ea/R) = -1.10 × (10^4) K

(-Ea/R) = -1.10 × (10^4) = -11000

R = 8.314 J/K.mol

Ea = -11000 × 8.314 = 91454 J/mol = 91.454 KJ/mol

b) c = In A = 33.5

A = e^33.5 = (3.54 × (10^14))/s

c) K = A(e^(-Ea/RT))

A = (3.54 × (10^14))/s, Ea = 91454 J/mol, T = 25°C = 298.15 K, R = 8.314 J/K.mol

K = (3.54 × (10^14))(e^(-91454/(8.314×298.15))) = 0.0336/s

QED!

Final answer:

This question pertains to the rate of a chemical reaction, which is  first order with respect to (CH3)3CBr and zero order with respect to OH-. An Arrhenius plot indicating temperature and rate constant is used to find activation energy and frequency factor.

Explanation:

The reaction you're describing is a typical chemical reaction. This type of reaction is first order with respect to (CH3)3CBr, which means the rate of the reaction depends on the concentration of this compound. OH-, on the other hand, is zero order, meaning its concentration doesn't affect the reaction's rate.

The plot you've mentioned is an Arrhenius plot, and it is used to determine the activation energy and frequency factor of a reaction from the slop and y-intercept respectively. Given the slope value of –1.10 x 10^4 K you mentioned, you can find the activation energy (Ea) from the formula Ea = -slope * R , where the slope is –1.10 x 10^4 K and R is the universal gas constant (8.3145 Joule/(mole*K)). Similarly, from the y-intercept value, you can find the frequency factor by the formula A=e^(y-intercept), where A is frequency factor and e is natural base.

Learn more about Chemical Reaction here:

https://brainly.com/question/34137415

#SPJ3

What is the mass percent of NaCl in a solution made by dissolving 23.0 g of NaCl in 150.0 g of water?

Answers

Answer:

13.3 % by mass of NaCl

Explanation:

Solution is made of NaCl and water

Mass of NaCl = 23 g → Solute

Mass of H₂O = 150 g → Solvent

Total mass of solution = Solute + Solvent

23 + 150 = 173 g

Mass percent of NaCl → (Mass of solute / Mass of solution) . 100

(23g / 173g) . 100 = 13.3 g

The mass percent of NaCl in a solution made by dissolving 23.0 g of NaCl in 150.0 g of water is approximately 13.3%.

The mass percent of NaCl in a solution is found by dividing the mass of the solute (NaCl) by the total mass of the solution (solute plus solvent), and then multiplying by 100%.

For a solution made by dissolving 23.0 g of NaCl in 150.0 g of water, the total mass of the solution would be the mass of NaCl plus the mass of water, which is 23.0 g + 150.0 g = 173.0 g. The mass percent of NaCl is then calculated as:

Calculate the total mass of the solution: 23.0 g NaCl + 150.0 g water = 173.0 gDivide the mass of NaCl by the total mass of the solution: 23.0 g NaCl ÷ 173.0 g solutionMultiply by 100% to get the mass percent: (23.0 g ÷ 173.0 g) × 100% = 13.3%

So, the mass percent of NaCl in the solution is 13.3%.

In aerobic cellular respiration, if four molecules of pyruvic acid enter steps two, the formation of acetyl CoA and three, the Krebs cycle, how many molecules of ATP, NADH, and FADH2 will be formed?

Answers

Answer:

The aerobic cellular respiration of the glucose where glucose is converted to energy via four steps as follows

1. Glycolysis (glucose break down to pyruvic acid)

2. Link reaction

3. Krebs cycle

4. Electron transport chain, or ETC

The four pyruvic acid produces Four ATP, twenty NADH, and four [tex]FADH_{2}[/tex] molecules

Explanation:

When four pyruvic acid enters step two of the aerobic cellular respiration, they are converted by Oxidative decarboxylation into acetyl-CoA, four molecules of NADH and four molecule of CO2 are formed. This process is otherwise called the link reaction or transition  step, because it connects or links the Krebs cycle and glycolysis.

From the chemical reactions involved in cellular respiration of one glucose molecule, from two pyruvic acid molecules we have 2 ATP molecules, 10 NADH molecules, and 2 FADH2 molecules

Hence from four pyruvic acid molecules we have that the acetyl-CoA produced from the four pyruvic acid enters the the Krebs cycle and forms four ATP molecules, twenty NADH molecules, and four [tex]FADH_{2}[/tex] molecules.

Final answer:

In aerobic cellular respiration, four molecules of pyruvic acid will generate a total of four molecules of ATP, sixteen molecules of NADH (four from the conversion to Acetyl CoA, and twelve from the Krebs cycle) and four molecules of FADH2

Explanation:

In aerobic cellular respiration, pyruvic acid is converted into acetyl CoA. One molecule of pyruvic acid generates one molecule of NADH during this conversion so four molecules of pyruvic acid will yield four molecules of NADH. Acetyl CoA then enters the Krebs cycle, for each molecule of Acetyl CoA that goes through the Krebs cycle, three molecules of NADH, one molecule of FADH2, and one molecule of ATP is formed. Therefore, the four molecules of pyruvic acid would end up generating four molecules of ATP, twelve molecules of NADH and four molecules of FADH2 during the Krebs cycle (not including the NADH generated during the conversion to Acetyl CoA).

Learn more about aerobic cellular respiration here:

https://brainly.com/question/33444823

#SPJ3

Some prokaryotes, such as the blue-green ____________ , are photosynthetic and contain ____________ where chlorophyll and other pigments absorb energy from the sun to produce carbohydrates via photosynthesis.

Answers

Final answer:

Blue-green algae are prokaryotes that carry out photosynthesis in chloroplasts, converting light energy into carbohydrates by using chlorophyll as a pigment for energy absorption.

Explanation:

Some prokaryotes, such as blue-green algae, are photosynthetic and contain chloroplasts where chlorophyll and other pigments absorb energy from the sun to produce carbohydrates via photosynthesis. The algae, specifically, are among the groups of prokaryotes that are capable of photosynthesis, much like plants. The chloroplasts in these cells function as the site where light energy captured by chlorophyll is converted into chemical energy, which is then used to create carbohydrates from carbon dioxide and water.

Learn more about Photosynthetic Prokaryotes here:

https://brainly.com/question/35402931

#SPJ3

Ethanol contains the elements carbon, hydrogen, and oxygen. When ethanol burns, it chemically reacts with oxygen gas. C2H6O + O2 ethanol oxygen gas What elements will be present in the substances that are created when ethanol burns?

Answers

Answer:

                    The elements that will be present after the burning of Ethanol are;

                  (i) Carbon

                   (ii)  Oxygen

                   (iii) Hydrogen

Explanation:

                    The balanced chemical equation for the burning of ethanol is as follow;

                            C₂H₅OH + 3 O₂ → 2 CO₂ + 3 H₂O

It can be observed in given balanced chemical equation that there three elements involved in this entire reaction. The elements that present in the reactant side are also found on the product side. It means that the elements have just rearranged going from reactant to product.

This means that this reaction is obeying Law of Conservation of Mass which states that mass can neither be created nor destroyed but it can be changed from one form to another hence, to keep the mass on both sides of the reaction balanced the same elements should be present on the product side too.

Answer: carbon, hydrogen, and oxygen only

Explanation: When a chemical reaction occurs, the atoms in the original set of substances are rearranged to form a new set of substances. The number of atoms of each element does not change.

The elements carbon, hydrogen, and oxygen are the only elements present in the original substances, so the only elements in the final substances after the reaction will be carbon, hydrogen, and oxygen, as well. The number of atoms of each element must be the same before and after the reaction.

At -18.6 °C, a common temperature for household freezers, what is the maximum mass of sucralose (C₁₂H₁₉Cl₃O₈) in grams you can add to 2.00 kg of pure water and still have the solution freeze?
Assume that sucralose is a molecular solid and does not ionize when it dissolves in water.
[tex]K_f[/tex] = 1.86 °C/m.

Answers

Answer : The maximum mass of sucralose is, 7952.8 grams.

Explanation :  Given,

Molal-freezing-point-depression constant [tex](K_f)[/tex] for water = [tex]1.86^oC/m[/tex]

Mass of water (solvent) = 2.00 kg

Molar mass of sucralose = 397.64 g/mole

Formula used :  

[tex]\Delta T_f=i\times K_f\times m\\\\T^o-T_s=i\times K_f\times\frac{\text{Mass of sucralose}}{\text{Molar mass of sucralose}\times \text{Mass of water in Kg}}[/tex]

where,

[tex]\Delta T_f[/tex] = change in freezing point

[tex]\Delta T_s[/tex] = freezing point of solution = [tex]-18.6^oC[/tex]

[tex]\Delta T^o[/tex] = freezing point of water = [tex]0^oC[/tex]

i = Van't Hoff factor = 1 (for sucralose non-electrolyte)

[tex]K_f[/tex] = freezing point constant for water = [tex]1.86^oC/m[/tex]

m = molality

Now put all the given values in this formula, we get

[tex](0-(-18.6)^oC)=1\times (1.86^oC/m)\times \frac{\text{Mass of sucralose}}{397.64g/mol\times 2.00kg}[/tex]

[tex]\text{Mass of sucralose}=7952.8g[/tex]

Therefore, the maximum mass of sucralose is, 7952.8 grams.

On a small farm, the weights of eggs that young hens lay are normally distributed with a mean weight of 51.3 grams and a standard deviation of 4.8 grams. Using the 68-95-99.7 rule, about what percent of eggs weigh between 46.5g and 65.7g.

Answers

Final answer:

Using the 68-95-99.7 rule, the percentage of eggs weighing between 46.5 grams and 65.7 grams, given a mean weight of 51.3 grams and a standard deviation of 4.8 grams, is estimated to be between 95% and 99%.

Explanation:

The question asks us to calculate the percentage of eggs that weigh between 46.5 grams and 65.7 grams, given that the weights are normally distributed with a mean of 51.3 grams and a standard deviation of 4.8 grams. Utilizing the 68-95-99.7 rule (also known as the Empirical Rule), we can determine percentages for different ranges from the mean in a normal distribution.

Firstly, to find the specific range that includes 46.5g to 65.7g from our mean of 51.3g, we calculate the number of standard deviations each value is from the mean. However, without doing the math, we see that 46.5g is less than one standard deviation away (since one standard deviation is 4.8g), and 65.7g is significantly more than two but less than three standard deviations away.

According to the 68-95-99.7 rule, 68% of data falls within one standard deviation, 95% within two, and 99.7% within three. Thus, intuitively, without precise calculation, we can say that the percentage of eggs weighing between 46.5g and 65.7g would be a bit less than 99.7%, as the upper limit is not yet reaching three standard deviations from the mean but is beyond the two-standard deviation mark that covers 95% of the distribution. Thus, it's reasonable to conclude that approximately 95-99% of eggs will fall within this weight range.

An unknown element is found to contain isotopes with the following masses and natural abundances: 38.9637 amu (93.08%), 39.9640 amu (0.012%), and 40.9618 amu (6.91%). Using these data, identify the element. a. S b. K c. Cld. Ca e. Ar

Answers

Answer: The unknown element is potassium.

Explanation:

Average atomic mass of an element is defined as the sum of masses of each isotope each multiplied by their natural fractional abundance.

Formula used to calculate average atomic mass follows:

[tex]\text{Average atomic mass }=\sum_{i=1}^n\text{(Atomic mass of an isotopes)}_i\times \text{(Fractional abundance})_i[/tex] .....(1)

For isotope 1:

Mass of isotope 1 = 38.9637 amu

Percentage abundance of isotope 1 = 93.08 %

Fractional abundance of isotope 1 = 0.9308

For isotope 2:

Mass of isotope 2 = 39.9640 amu

Percentage abundance of isotope 2 = 0.012 %

Fractional abundance of isotope 2 = 0.00012

For isotope 3:

Mass of isotope 3 = 40.9618 amu

Percentage abundance of isotope 3 = 6.91 %

Fractional abundance of isotope 3 = 0.0691

Putting values in equation 1, we get:

[tex]\text{Average atomic mass of Z}=[(38.9637\times 0.9308)+(39.9640\times 0.00012)+(40.9618\times 0.0691)][/tex]

[tex]\text{Average atomic mass of Z}=38.85amu[/tex]

For the given options:

Option a: Average atomic mass of Sulfur = 32.065 amu

Option b: Average atomic mass of Potassium = 39.09 amu

Option c: Average atomic mass of Chlorine = 35.45 amu

Option d: Average atomic mass of Calcium = 40.078 amu

Option e: Average atomic mass of Argon = 39.94 amu

As, the average atomic mass of unknown element is near to the average atomic mass of potassium. So, the unknown element is potassium.

Hence, the unknown element is potassium.

Final answer:

The element with isotopes of masses 38.9637 amu, 39.9640 amu, and 40.9618 amu, and natural abundances of 93.08%, 0.012%, and 6.91% respectively, is Calcium (Ca).

Explanation:

To identify the element based on its isotopes, we need to calculate the average atomic mass of the element. This can be done by multiplying the mass of each isotope by its natural abundance (expressed as a decimal), and then summing up these products. In this case, the element with isotopes of masses 38.9637 amu, 39.9640 amu, and 40.9618 amu, and natural abundances of 93.08%, 0.012%, and 6.91% respectively, is Calcium (Ca). The average atomic mass of calcium can be calculated as follows:

(38.9637 amu * 0.9308) + (39.9640 amu * 0.00012) + (40.9618 amu * 0.0691) = 40.08 amu

Therefore, the element is calcium (Ca).

Learn more about Identifying elements based on isotopes here:

https://brainly.com/question/22995587

#SPJ

Molecules can be described as
A) mixtures of two or more pure substances
B) mixtures of two or more elements that has a specific ratio between components
C) two or more atoms chemically joined together
D) heterogeneous mixtures
E) homogeneous mixtures

Answers

E) two or more atoms chemically joined together.

The following information should be considered:

A molecule refers to the smallest particle of a large compound that is created via the bonding of two or more atoms. The bonding should be between the atoms changes the physical and chemical properties of the particles.

Learn more: https://brainly.com/question/2289757?referrer=searchResults

Answer:

two or more atoms chemically joined together.

Explanation:

What is the percentage yield of O2 if 12.3 g of KClO3 (molar mass 123 g) is decomposed to produce 3.2 g of O2 (molar mass 32 g) according to the equation above?

Answers

Answer:

The percentage yield of O2 is 66.7%

Explanation:

Reaction for decomposition of potassium chlorate is:

2KClO₃ →  2KCl  +  3O₂

The products are potassium chloride and oxygen.

Let's find out the moles of chlorate.

Mass / Molar mass = Moles

12.3 g / 123 g/mol = 0.1 mol

So ratio is 2:3, 2 moles of chlorate produce 3 mol of oxygen.

Then, 0.1 mol of chlorate may produce (0.1  .3)/ 2 = 0.15 moles

Let's convert the moles of produced oxygen, as to find out the theoretical yield.

0.15 mol . 32 g/ 1mol = 4.8 g

To calculate the percentage yield, the formula is

(Produced Yield / Theoretical yield) . 100 =

(3.2g / 4.8g) . 100 = 66.7 %

The branch of science which deals with the study of chemicals and their bond is called chemistry.

The correct percentage yield of O2 is 66.7%

The Reaction for decomposition of potassium chlorate is as follows:-

[tex]2KClO_3 <---> 2KCl + 3O_2[/tex]

The formula is as follows:- [tex]\frac{Mass }{Molar\ mass} = Moles[/tex]

After putting the value in the question is:-

[tex]\frac{12.3 g}{123} = 0.1 mol[/tex]

So the ratio present in the reaction is 2:3.

Therefore, the 0.1 mole of chlorate produce [tex]\frac{(0.1 *3)}{2} = 0.15 moles[/tex]

Convert them into molar mass is:-

[tex]\frac{0.15*32 g}{1mol} = 4.8 g[/tex]

The percentage of the compound is [tex]\frac{(3.2g}{4.8g}* 100 = 66.7 %[/tex].

Hence, the correct answer is 66.7%

For more information, refer to the link:-

https://brainly.com/question/19524691

Photovoltaic cells convert solar energy into electricity. Calculate the wavelength of light (in nm) required for mercury (Φ =7.22 × 10–19 J) to emit an electron. Then determine whether or not mercury could be used to generate electricity from the sun. Assume that most of the electromagnetic energy from the sun is in the visible region near 500 nm.

Answers

Answer:

275.3 nm is the wavelength of light required for mercury.

Mercury can not be used to generate electricity from the sun because wavelength at which mercury will emit an electron is smaller than 500 nm.

Explanation:

The wavelength of light required for mercury  to emit an electron.

The wavelength of the radiation = [tex]\lambda [/tex]

Energy required fro mercury to to emit an electron = E

Energy required fro mercury to to emit an electron will the energy if the radiation = E' = [tex]7.22\times 10^{-19} J[/tex]

E' = E

To calculate the wavelength of light, we use the equation:

[tex]E=\frac{hc}{\lambda }[/tex]

where,

[tex]\lambda[/tex] = wavelength of the light  

h = Planck's constant = [tex]6.626\times 10^{-34} Js[/tex]

c = speed of light = [tex]3\times 10^8m/s[/tex]

[tex]\lambda =\frac{hc}{E}[/tex]

[tex]=\frac{6.626\times 10^{-34} Js\times 3\times 10^8m/s}{7.22\times 10^{-19} J}[/tex]

[tex]\lambda =2.753\times 10^{-7} m=2.753\times 10^{-7}\times 10^ nm =275.3 nm[/tex]

Wavelength of the sun light in the visible region = 500 nm

500 nm > 275.3 nm

[tex]E\propto \frac{1}{\lambda }[/tex]

Less energy < more energy

So, this means that mercury can not be used to generate electricity from the sun.

The wavelength of light in nm is

275nm

The mathematical formula for wavelength

[tex]\lambda = \frac{hc}{E}\\\\ \lambda = \frac{6.626*10^{-34} * 3*10^8}{7.22*10^{-19}}\\\\ \lambda = 2.7531856*10^{−7}\\\\ \lambda = 275nm [/tex]

No, the therhold energy is larger than the wavelength of sun, therefore, electricity will not be generated.

For more information on wavelength, visit

https://brainly.com/question/10728818

A compound's molecular formula must always be different than the compound's empirical formula. TRUE FALSE

Answers

Answer: False

Explanation:

Molecular formula is the chemical formula which depicts the actual number of atoms of each element present in the compound.  

Empirical formula is the simplest chemical formula which depicts the whole number of atoms of each element present in the compound.

Example: [tex]CH_4[/tex] has similar molecular formula and empirical formula as the elements are already present in simplest of the ratios.

[tex]C_2H_2[/tex] has molecular formula of [tex]C_2H_2[/tex] but [tex]CH[/tex] as the empirical formula.

Describe a sigma bond.a. orbital overlapping with the side of a p orbitalb. overlap of two d orbitalsend to end overlap of p orbitalc. sp orbital overlapping with an f orbitald. side by side overlap of d orbitals

Answers

A sigma bond b. overlap of two d orbitals end-to-end overlap of p orbital.

What is a sigma bond?

A sigma bond is a strong bond that is made up of overlapping orbitals. In fact, these bonds are the strongest known bonds in chemical reactions. The overlapping orbitals are in the form of covalent bonding and this gives us the idea that sigma bonds are strong in nature.

In addition, sigma bonds are mostly common with diatomic elements and compounds. There are three orbitals where the sigma bond can be found and they are the p-p, s-p, and the s-s orbitals. These are known for forming symmetry groups.

Learn more about Sigma bonds here:

https://brainly.com/question/31377841
#SPJ6

Maleic acid is an organic compound composed of 41.39% , 3.47% , and the rest oxygen. If 0.378 mole of maleic acid has a mass of 43.8 g, what are the empirical and molecular fomulas of maleic acid?

Answers

Answer:

Empirical CHO

molecular C4H4O4

Explanation:

From the question, we know that it contains 41.39% C , 3.47% H and the rest oxygen. To get the % composition of the oxygen, we simply add the carbon and hydrogen together and subtract from 100%.

This means : O = 100 - 41.39 - 3.47 = 55.14%

Next is to divide the percentage compositions by their atomic masses.

C = 41.39/12 = 3.45

O = 55.14/16 = 3.45

H = 3.47/1 = 3.47

Now we divide by the smallest value which is 3.45. We can deduce that this will definitely give us an answer of 1 all through as the values are very similar.

Hence the empirical formula of Maleic acid is CHO

Now we go on to deduce the molecular formula.

To do this we need the molar mass. I.e the amount in grammes per one mole of the compound.

Now we can see that 0.378mole = 43.8g

Then 1 mole = xg

x = (43.8*1)/0.378 = 115.87 = apprx 116

[CHO]n = 116

(12 + 1 + 16]n = 116

29n = 116

n = 116/29 = 4

The molecular formula is thus C4H4O4

Air is 78.1% nitrogen, 20.9% oxygen, and 0.934% argon by moles. What is the density of air at 22 °C and 760 torr? Assume ideal behavior.

Answers

Answer:

The density of air at 22 °C and 760 torr is 1.195 KG/m³

Explanation:

The solution to the above  question is arrived t by considering the given variables and calculating the number of moles in a 1 m³ sample of air by plugging values into the universal gas equation  from which the number of moles of the constituent gases can be calculated by Dalton's law of partial pressure, then their masses and lastly the density of air is calculated using the formula, Density = mass/volume

The given variables are

Percentage Nitrogen = 78.1% by volume

Percentage oxygen = 20.9% by volume

Percentage argon = 0.934% by volume

The molar mass of nitrogen = 14.006g/mol

The molar mass of oxygen = 15.999g/mol

The molar mass of argon = 39.948 g/mol hence Considering a unit volume of air of one cubic meter (1m^3) we have

0.781 m³ of nitrogen, 0.209 m³ of oxygen and 0.00934 m³ of argon

The number of moles in 1 m³ of gas at 22 °C and 760 torr is given by

PV = nRT or n = [tex]\frac{PV}{RT}[/tex] = where 760 torr = 101325Pa we have n = [tex]\frac{(101325)(0.001)}{(8.314)(295.15)}[/tex] = 0.00413 mols per liter or 41.29 moles/m³

thus we have number of moles of nitrogen = 42.129 × 78.1% = 32.25 moles and the mass of nitrogen = 32.25×28.02 = 903.6 g

number of moles of oxygen= 42.129 × 20.1% = 8.63 moles and the mass of nitrogen = 8.63×32 = 276.16 g

number of moles of argon= 42.129 × 0.934% = 0.386 moles and the mass of nitrogen = 0.386×40 = 15.43 g

Therefore, mass of one cubic meter of air (1 m³), has a mass of

903.6 g + 276.16 g + 15.43 g = 1195.2 g or 1.195 KG Hence the density of air

is given by Density = [tex]\frac{mass}{volume}[/tex] =[tex]\frac{1.195 KG}{1 m^{3} }[/tex]  = 1.195 KG/m³

The density of air at 22 °C and 760 Torr is 1.19 g/L.

Air is 78.1% nitrogen, 20.9% oxygen, and 0.934% argon by moles. We will calculate the average molar mass of the air (M) as a weighted average of the molar masses of its constituents.

[tex]M = 78.1\% \times M(N_2) + 20.9\% \times M(O_2) + 0.934\% \times M(Ar)\\\\M = 78.1\% \times 28.00g/mol + 20.9\% \times 32.00g/mol + 0.934\% \times 39.95 g/mol = 28.93 g/mol[/tex]

Then, we will convert 22 °C to Kelvin using the following expression.

[tex]K = \° C + 273.15 = 22\° C + 273.15 = 295 K[/tex]

Assuming ideal behavior, we can calculate the density (ρ) of the air at 295 K (T) and 760 Torr (P) using the following expression.

[tex]\rho = \frac{P \times M }{R \times T} = \frac{760 Torr \times 28.93g/mol }{(62.4mmHg.L/mol.K) \times 295K} = 1.19 g/L[/tex]

where,

R: ideal gas constant

The density of air at 22 °C and 760 Torr is 1.19 g/L.

Learn more: https://brainly.com/question/19265446

es the molecule defective leading to sickle cell anemia. Predict whether the following hypothetical change would or would not have a major effect at position 6.

Answers

Full Question:

In hemoglobin, a single amino acid change at position 6 from Glu to Val has major consequences on hemoglobin structure that makes the molecule defective leading to sickle cell anemia. Predict whether the following hypothetical change would or would not have a major effect at position 6. Briefly explain (1-2 sentences). Glu to Leu Hint: Look at the structures of the R groups and consider their chemical properties

Answer:

The structure of the haemoglobin, hence the RBC won't be same as normal.

Explanation:

Both the leucine and glutamic acid are alpha amino acids which have an alpha carboxylic acid group and an alpha amino group. The variable in case of glutamic acid is propyl acid while the variable in case of leucine is isobutyl.

The glutamic acid is the normal amino acid of the 6th position of Beta chain of hemoglobin. Its an acid group, so can form bonds with another base inside the haemoglobin, or can form other hydrogen bonds. But the isobutyl group is an alkyl group. So it doesn't have that much effect in the recovering the structure, and sickle cell anemia prevails.

Determine the percent composition of CH2O.

Answers

Answer:

The given chemical compound has 2 atoms of hydrogen and one atom of oxygen for each atom of carbon. The mass of CH2O is 12 + 2*1 + 16 = 30. The molecular weight of the compound is 180.18 which is approximately 180. This gives the molecular formula of the chemical compound as C6H12O6.

Explanation:

Final answer:

To calculate the percent composition of CH2O, determine the molar mass of each element and the total molar mass of the compound. The percent composition is approximately 40.0% Carbon, 6.7% Hydrogen, and 53.3% Oxygen.

Explanation:

To calculate the percent composition of CH2O, we will need to determine the molar mass of each element in the compound and the total molar mass of the compound. The molar masses from the periodic table are approximately 12.01 g/mol for Carbon (C), 1.01 g/mol for Hydrogen (H), and 16.00 g/mol for Oxygen (O).

First, let's calculate the total molar mass of CH2O: (1 × 12.01) + (2 × 1.01) + (1 × 16.00) = 12.01 + 2.02 + 16.00 = 30.03 g/mol.

Now, let's find the percent composition for each element:

Carbon: (12.01 g/mol ÷ 30.03 g/mol) × 100% = 40.0%Hydrogen: (2.02 g/mol ÷ 30.03 g/mol) × 100% = 6.7%Oxygen: (16.00 g/mol ÷ 30.03 g/mol) × 100% = 53.3%

The percent composition of CH2O is therefore approximately 40.0% Carbon, 6.7% Hydrogen, and 53.3% Oxygen.

Suppose 0.410 kg of hexane are burned in air at a pressure of exactly 1 atm and a temperature of 13.0 °C. Calculate the volume of carbon dioxide gas that is produced.Round your answer to 3 significant digits.

Answers

Answer:

The answer is 671 litres of carbon dioxide is produced from 0.410 kg of hexane

Explanation:

We first write a balanced reaction for the complete combustion of hexane thus

The stoichiometry of the cumbustion of hexane in air is

2C6H14(g)+18O2(g)→12CO2(g)+14H2O(l) or

C6H14(g)+9O2(g)→6CO2(g)+7H2O(l)

From the above reaction it is observed that one mole of hexane burns completely in the presence of oxygen to produce 6 moles of carbon dioxide

Therefore we calculate the nuber of moles of hexane present in the sample thus

Mass hexane of sample = 0.41 kg

Molar nass of hexane = 86.18 g/mol

number of moles of hexane = (mass of hexane)/(molar mass of hexane) = (0.41×1000)/86.16 = 410/86.16 = 4.76 moles

As we have seen from the chemical reaction, 1 mole of H6H14 produces 6 moles of CO2 hence 4.76 moles of Hexane produces

4.76×6 moles of CO2 which is 28.55 moles of CO2

From the question we have the temperature and the pressure of the production of CO2 as

Temperature of reaction = 13° C converting to kelving gives= 13+273.15 = 286.15 K

and pressure = 1 atmosphere or 101325 Pa

13.0∘C=13.0∘C+273.15=286.15 K

The volume of the produced CO2 can be calculated using the combined ideal gas equation given by

P×V=n×R×T where

Here

P = Gas pressure (of CO2 )

V = Volume (of the CO2)

n = number of moles of gas (CO2) present

R = universal gas constant, equal to 0.0821 atm× L/(mol× K )

T = absolute temperature in Kelvin

Thus we have

1×V = 28.55×0.0821×286.15  or V  = 670.76L

Rounding up the answer to 3 significant digits we have

670.76L ≅ 671L

671 litres of carbon dioxide is produced from 0.410 kg of hexane

Other Questions
The sudden arrest of his motion, the abrasion of one of his hands on the gravel, restored him, and he wept withdelight. He dug his fingers into the sand, threw it over himself in handfuls and audibly blessed it. It looked likediamonds, rubies, emeralds; he could think of nothing beautiful which it did not resemble. The trees upon the bankwere giant garden plants; he noted a definite order in their arrangement, inhaled the fragrance of their blooms.Which best describes the effect of the narration in the excerpt? Miss Jan De Jong is orderly, neat, fairly quiet, and shy. She enjoys reading in her spare time and belongs to a social clubthat includes three librarians, nine real estate agents, and eight social workers. A tendency to conclude that Jan must be oneof the three librarians would illustrate the powerful influence of:A) confirmation bias. D) the belief perseverance phenomenon.B) the framing effect. E) the availability heuristic.C) the representativeness heuristic. Explain why a rock pocket mouse color influence its overall fitness. Remember that "fitness" is defined by an organisms ability to survive and produce offspring in its environment Whats a protagonist In a medium where lactose is the only carbon source, transcription of the lac operon is _______, because lac repressor is ________ to the ________. Solve 4(4f-9)=-(2-f) Which of the following is the best explanation for why cells are considered the smallest units of living things. Cells have the ability to reproduce identical copies of themselves in a process called mitosis. Cells cannot be seen with the naked eye and are considered microscopic. Cells are the simplest structure to fit all of the characteristics necessary to be considered alive. Cells are highly ordered and complex. Denzel does not want to lock up his money in Investments that have a long maturity period, nor does he like to take big risks. So, he'd like to seesome moderate return on his investments in a year. He also has more faith in Investments issued by the government than those issued byprivate companies. Which investment would be a good choice for Denzel?A commodity stocksB. retirement accountsec short-term bondsD. US Treasury bonds What angular speed (in revolutions per minute) is needed for a centrifuge to produce an acceleration of 759 times the gravitational acceleration 9.8 m/s 2 at a radius of 4.83 cm ? You decide to buy 1,300 shares of stock at a price of $36 and an initial margin of 65 percent. What is the maximum percentage decline in the stock before you will receive a margin call if the maintenance margin is 40 percent? (Do not round intermediate calculations. Enter your answer as a percent rounded to 2 decimal places. Do not include a minus sign. Omit the "%" sign in your response.) Given the following sequence, what is the 10th term of the sequence? Assume that the sequences start with an index of 1. Sequence: The nth term is 3. An initial investment of $1000 is appreciated for 4 years in an account that earns 4% interest, compounded annually. Find the amount of money in the account at the end of the period. The Unearned Revenue account of Berry Incorporated began 2018 with a normal balance of $ 6 comma 000 and ended 2018 with a normal balance of $ 15 comma 000. During 2018, the Unearned Revenue account was credited for $ 20 comma 000 that Berry will earn later. Based on these facts, how much revenue did Berry earn in 2018? The terms "data", "information", and "knowledge" have specific meanings. With regard to a customer satisfaction application used in the automobile industry, which of the following is an example of data? a. the ability to create a program that provides rewards for dealerships with high levels of customer satisfaction and corrective action plans for dealerships that have low levels of satisfaction. b. the web-based application that collects and stores records of customer satisfaction surveys and allows dealerships to view their data. c. reports that summarize ratings for a specific dealership including a calculation of the average rating across all survey questions and a calculation of summary statistics for groups of questions that correspond to important dimensions such as dealership staff, satisfaction with product, quality of service and so on. d. records containing numerical ratings from customer surveys completed online after each visit to a dealership. What is the kinetic energy of the ball as it is half way through the fall? there were 15 questions of which nicole answered 8 incorrectly at this rate how many should she expect to answer correctly if she answers a total of 135 questions (X^2+2x+5)(2x) simplify this Why can the boundary layer surrounding a photosynthetic organism make it difficult for the organism to obtain the carbon dioxide it needs for photosynthesis? Language: English EspaolMEIOSISMeioticDivision 1DNAReplicationand RecombinationCellDivision 1MeioticDivision 200:00:43CellDivision 2OD ODSAt the end of meiosis II, how does the DNA in each of the four new cells compare to the DNA from the original cell? A 55 kgkg meteorite buries itself 5.5 mm into soft mud. The force between the meteorite and the mud is given by F(x)F(x) = (630 N/m3N/m3 )x3x3, where xx is the depth in the mud. Find the work done on the meteorite by the mud.