In expanded notation, the hexadecimal 74AF16 is (7*4096) + (4*256) + (A*16) + (F*1). When converting from hexadecimal to decimal, what value is assigned to F?

Answers

Answer 1

Answer:

F is assigned the value of 15

[tex]74AF_{16} = 29871_{10}[/tex]

Step-by-step explanation:

Hexadecimal number system is base 16 and it contain the following numbers:

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F

A has a value of 10

B has a value of 11

C has a value of 12

D has a value of 13

E has a value of 14

F has a value of 15

By completing the expanded notation:

[tex](7*4096) + (4*256) + (A * 16) + (F *1)\\= (7*4096) + (4*256) + (10 * 16) + (15 *1)\\= 28672 + 1024 + 160 + 15\\= 29871[/tex]

Answer 2
Final answer:

In hexadecimal notation, the letter 'F' corresponds to the decimal value 15. Therefore, when converting from hexadecimal to decimal, you would assign the value 15 to 'F'.

Explanation:

In hexadecimal notation, the letters A through F correspond to the decimal values 10 through 15, respectively. When converting from hexadecimal to decimal, you would replace the hexadecimal digit 'F' with its decimal equivalent. Therefore, in the hexadecimal system, the letter 'F' signifies the decimal number 15. To calculate the value of 74AF16 in decimal, you replace 'F' with 15 and compute the expression (7*4096) + (4*256) + (10*16) + (15*1).

Learn more about Hexadecimal Conversion here:

https://brainly.com/question/35330748

#SPJ12


Related Questions

Find g prime left parenthesis x right parenthesis for the given function. Then find g prime left parenthesis negative 3 right parenthesis​, g prime left parenthesis 0 right parenthesis​, and g prime left parenthesis 2 right parenthesis. g left parenthesis x right parenthesis equals StartRoot 4 x EndRoot

Answers

Answer: For x = 0, -3, our expression is undefined and for x = 2, we have 0.707.

Step-by-step explanation: From the question, we have

g(x) = \sqrt{4x}

Simplifying the right-hand side, we have:

g(x) = 2x^{1/2}

Differentiating with respect to $x$ using the second principle, we have,

g'(x) =  2 * \frac{1}{2} * x^{\frac{1}{2} - 1}

= x^{-1/2}

So from the indical laws,   g'(x) =x^\frac{-1}{2} = 1/\sqrt{x}  

For values of g'(x) when x = -3, we have

g(x) = 1/\sqrt{-3}

g(x) is undefined for values of x when x is -3 since the square root of a negative number is not defined. However, using complex solution we have

g(x) = 1/\sqrt{-3}

But \sqrt{-1} = i; then \sqrt{-3} = \sqrt(-1 * 3)

This is same as \sqrt(-1) * \sqrt(3)

And then we have 1.732i

For x = 2, we have

g’(2) = 1/\sqrt (x)

= 1/\sqrt(2) = 0.707

For x = 0, we have

g’(0) = 1/\sqrt (0)

 = 1/0

Here again for x = 0, our expression is undefined.

Write an equation in slope-intercept form of the line perpendicular to y = - 1 5 x + 1 4 that passes through the point (3, 4).

Answers

The equation of the line is [tex]y=\frac{1}{15} x+\frac{19}{5}[/tex]

Explanation:

The equation is [tex]y=-15x+14[/tex] and passes through the point (3,4)

To find the equation of the line in slope intercept form, first we shall find the slope.

This equation is of the slope-intercept form [tex]y=m x+b[/tex], we shall find the value of slope.

Thus, slope m = -15

Since, the line is perpendicular, the negative slope is given by [tex]\frac{-1}{m}[/tex]

Thus, the new slope is [tex]m=\frac{1}{15}[/tex]

Now, we shall find the equation of the line perpendicular to the slope [tex]\frac{1}{15}[/tex] is

[tex]y-y_{1}=\frac{1}{15} \left(x-x_{1}\right)[/tex]

Let us substitute the points (3,4), we have,

[tex]y-4=\frac{1}{15} \left(x-3\right)[/tex]

Muliplying the term within the bracket, we get,

[tex]y-4=\frac{1}{15}x-\frac{1}{5}[/tex]

Adding both sides of the equation by 4, we get,

[tex]y=\frac{1}{15}x-\frac{1}{5}+4[/tex]

Adding the like terms, we have,

[tex]y=\frac{1}{15} x+\frac{19}{5}[/tex]

Thus, the equation in slope intercept form of the line is [tex]y=\frac{1}{15} x+\frac{19}{5}[/tex]

A group of five applicants for a pair of identical jobs consists of three men and two women. The employer is to select two of the five applicants for the jobs. Let S denote the set of all possible outcomes for the employer’s selection. Let A denote the subset of outcomes corresponding to the selection of two men and B the subset corresponding to the selection of at least one woman. List the outcomes in A, B, A ∪ B, A ∩ B, and A ∩ B. (Denote the different men and women by M1, M2, M3 and W1, W2, respectively.)

Answers

Answer:

A= {M1,M2},{M2,M3}, {M2,M3}

A U B = S

A n B = 0

A n B'= A

Step-by-step explanation:

A= ( Two males) = { (M1,M2), (M2,M3), (M2,M3)

B= (Atleast one female) = {M1,W1}, {M,W1}, {M3,W1}, {M1,W2} , {M2,W2}, {M3,W2}

Following are the solution to the required function:

Set function:

Given that there are five applicants with three men and two women.

Let S be the subset of the set of all possible outcomes,

[tex]\{M_1, M_2\}, \{M_2, M_3\},\{M_3,M_1\},\{W_1,M_1\},\{W_2,M_1\},\{W_1, M_2\},\\\{W_2,M_2\},\{W_1, M_3\},\{W_2, M_2\}, \{W_1,W_2\}[/tex]

Let A denote the subset of outcomes corresponding to the selection of two men.

The possible outcomes of A are,

[tex]\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}[/tex]

Let B be the subset corresponding to the selection of at least one woman.

[tex]\{W_1,M_1\},\{W_2,M_1\},\{W_1, M_2\},\\\{W_2,M_2\},\{W_1, M_3\},\{W_2, M_2\}, \{W_1,W_2\}[/tex]

Then [tex]\bar{B} =[/tex]

[tex]\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}[/tex]

Find [tex]A\cup B\\\\[/tex]

[tex]=\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}\} \cup \{ \{W_1,M_1\},\{W_2,M_1\},\{W_1, M_2\},\\\{W_2,M_2\},\{W_1, M_3\},\{W_2, M_2\}, \{W_1,W_2\}\}\\\\=\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}, \{W_1,M_1\},\{W_2,M_1\},\{W_1, M_2\},\\\{W_2,M_2\},\{W_1, M_3\},\{W_2, M_2\}, \{W_1,W_2\}\}\\\\[/tex]

Find [tex]A\cap B\\\\[/tex]

[tex]=\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}\} \cap \{ \{W_1,M_1\},\{W_2,M_1\}, \{W_1, M_2\}, \\ \{W_2,M_2\},\{W_1, M_3\},\{W_2, M_2\}, \{W_1,W_2\}\}\\\\ =\{\phi\}[/tex]

Find [tex]A\cap \bar{B}\\\\[/tex]

[tex]=\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}\cap\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}\\\\=\{\{M_1,M_2\}, \{M_2,M_3\},\{M_3,M_1\}\\\\[/tex]

Learn more about the set function here:

brainly.com/question/25009504

A whistle is made of a square tube with a notch cut in its edge, into which a baffle is brazed. Determine the dimensions d and θ for the baffle. Take b = 6.5 cm.

Answers

Answer:

d = 7.51 cm

θ = 60°

Step-by-step explanation:

The baffle used in the notch of a whistle is a triangular baffle (Isosceles triangle OAB).

For the isosceles triangle, the sides with equal dimension are OA and OB which is represented with d

d = the vertical component of the side of a triangle

It is given by

6.5cm = d sin60

d = 6.5/sin60

d = 7.505553499465134

d = 7.51 cm -------- Approximated

To calculate angle θ

Angle on a straight line is = 180

So, 60 + 60 + θ = 180

θ= 180 - 120

θ = 60°

(See attachments below)

The half-life of Sodium-24 is 15 hours. If you start with 600 grams of sodium-24 how much would be left after 4 days? Which of the following equations could you use to solve for the amount of grams left after 4 days?

Answers

Step-by-step explanation:

A = A₀ ½^(t / T)

where A is the amount left, A₀ is the original amount, t is time, and T is the half life.

4 days is 96 hours, so the amount left is:

A = 600 ½^(96 / 15)

Final answer:

To find how much Sodium-24 will be left after 4 days, we calculate the number of half-lives in 96 hours (which is 6.4) and use the formula remaining amount = initial amount × (1/2)n, resulting in approximately 8.79 grams remaining.

Explanation:

The question asks how much Sodium-24 would be left after 4 days, given its half-life of 15 hours. Firstly, we convert 4 days into hours, which is 4 days × 24 hours/day = 96 hours. Next, we divide 96 hours by the half-life of Sodium-24, which is 15 hours, to find out how many half-lives have passed. The result is 96/15 = 6.4 half-lives.

Using the half-life decay formula, which is remaining amount = initial amount × (1/2)n, where 'n' is the number of half-lives, we can substitute the given values to find the number of grams left.
Remaining sodium-24 = 600 g × (1/2)6.4 ≈ 600 g × 0.01465 ≈ 8.79 g

Therefore, approximately 8.79 grams of Sodium-24 would remain after 4 days.

You have a right circular cone of height 1530 mm and volume 2.2 x 104 in3 . Calculate the base diameter of the cone.

Answers

Answer:

  37.35 in

Step-by-step explanation:

The volume of a cone is given by the formula ...

  V = (π/3)r²h

where r is the radius of the base and h is the height. We want to find the diameter of the base, so we can rewrite this in terms of diameter and solve for d. Please note that the height is given in millimeters, not inches, so a conversion is necessary.

  V = (π/3)(d/2)²h

  12V/(πh) = d²

  d = 2√(3V/(πh)) = 2√(3(2.2×10^4 in^3)/(π·1530 mm/(25.4 mm/in))

  = 2√(1.6764×10^6/(π·1.53×10^3) in^2)

  d ≈ 37.35 in

The base diameter of the cone is about 37.35 inches.

Final answer:

The diameter of the base of the cone is found to be approximately 18.28802 inches after substituting the given values into the volume formula for a cone and solving for radius, and then doubling to get diameter.

Explanation:

The volume V of a right circular cone is given by the formula V = 1/3πr²h, where r represents the radius of the cone's base and h is the cone's height. The diameter of the base of a cone is double the radius, so we will be solving for diameter instead of radius.

We were given V = 2.2 x 104 in³ and h = 1530 mm. Firstly it is important to note that 1 mm is equal to approximately 0.0393701 in, so h becomes approximately 60.2362205 in. Now we substitute these values into the equation and solve for r as follows: 2.2 x 104 = 1/3πr²*60.2362205. Solving for r we get r = approximately 9.14401 in.

We obtain the diameter by doubling the radius, so the diameter d = 2r = 18.28802 in.

Learn more about Cone diameter calculation here:

https://brainly.com/question/34207679

#SPJ2

Let p be the statement "There is no pollution in New Jersey." The statement "The whole world is polluted" is the negation of the statement "There is no pollution in New Jersey." Is the above statement true?

Answers

Answer:

No. It is not true.

Step-by-step explanation:

p = There is no pollution in New Jersey

¬p = There is pollution in New Jersey.

Removing the 'no' in the statement yield the negation.

The given statement "The whole world is polluted" is not correct because it has gone beyond it context/domain. Statement p is about New Jersey, so the negation should be about New Jersey.

The negation can also be written as: "New Jersey is polluted".

Final answer:

In logic, the negation of a statement is its direct contradiction. In this case, 'The whole world is polluted' is not the negation of 'There is no pollution in New Jersey'.

Explanation:

In the field of logic and reasoning, the negation of a statement is a statement which contradicts or denies the original one. If the statement 'p' is 'There is no pollution in New Jersey', its negation would be 'There is pollution in New Jersey' because it is the exact opposite of the original statement. However, the statement 'The whole world is polluted' is not the direct negation of 'There is no pollution in New Jersey'. While it implies that there is pollution in New Jersey, it goes beyond that by including every other part of the world.

Learn more about Logic and Reasoning here:

https://brainly.com/question/22813859

#SPJ3

The table shows the functions representing the height and base of a triangle for different values of x The area of the triangle when x= 2 is 14. Which equation can be used to represent the area of the triangle, A(x)?

Answers

Answer: option 2 is the correct answer.

Step-by-step explanation:

When x = 2, the area is 14.

It means that height = 2² + 3 = 7

It means that base = 2² = 4

Area = 1/2 × 7 × 4 = 14

Therefore, it is a right angle triangle, the formula for determining the area of the triangle is expressed as

Area = 1/2bh

Where

b represents the base of the triangle.

h represents the height of the triangle.

Since height is f(x) = x² + 3 and base is g(x) = 2x,

The equation that can be used to represent the area is

A(x) = 0.5(f.g)(x)

Use the graph to fill in the blank with the correct number. f(−2) = ________ X, Y graph. Plotted points negative 3, 0, negative 2, 2, 0, 1, and 1, negative 2. Numerical Answers Expected! Answer for Blank 1:

Answers

The given points

[tex](-3, 0)[/tex]

[tex](-2, 2)[/tex]

[tex](0, 1)[/tex]

[tex](1, -2)[/tex]

Imply that

[tex]f(-3)=0[/tex]

[tex]f(-2)=2[/tex]

[tex]f(0)=1[/tex]

[tex]f(1)=-2[/tex]

Answer:

f(2) = -1.

Step-by-step explanation:

A ball is kicked upward with an initial velocity of 32 feet per second. The ball's height, h (in feet), from the ground is modeled by where t is measured in seconds. How much time does the ball take to reach its highest point? What is its height at this point?

Answers

Answer:

1.        t = 0.995 s

2.       h = 15.92  ft

Step-by-step explanation:

First we have to look at the following formula

Vf = Vo + gt

then we work it to clear what we want

Vo + gt = Vf

gt = Vf - Vo

t = (Vf-Vo)/g

Now we have to complete the formula with the real data

Vo = 32 ft/s      as the statement says

Vf = 0     because when it reaches its maximum point it will stop before starting to lower

g = -32,16 ft/s²        it is a known constant, that we use it with the negative sign because it is in the opposite direction to ours

t = (0 ft/s - 32 ft/s) / -32,16 ft/s²

we solve and ...

t = 0.995 s

Now we will implement this result in the following formula to get the height at that time

h = (Vo - Vf) *t /2

h = (32 ft/s - 0 ft/s) * 0.995 s / 2

h = 32 ft/s * 0.995 s/2

h = 31.84 ft / 2

h = 15.92  ft

Final answer:

The ball takes 2 seconds to reach its highest point and the height at this point is 32 feet.

Explanation:

To find the time it takes for the ball to reach its highest point, we can use the equation h = -16t^2 + 32t, where h is the height and t is the time. The maximum height is reached when the ball is at its highest point, which occurs when the ball is not moving vertically.

At this point, the velocity of the ball is 0, so the equation v = -16t + 32 can be used to find the time. Setting v = 0 and solving for t, we get t = 2 seconds.

Substituting this time value into the equation for height, we can find the height at this point. h = -16(2)^2 + 32(2) = 32 feet.

Therefore, the ball takes 2 seconds to reach its highest point and the height at this point is 32 feet.

is 0.963 close to 3/4

Answers

Answer:

I would say No

Step-by-step explanation:

3/4 = .75

like 3 quarters

.75 about .963 no its not its about .2 away

There's no such concept as "close" in mathematics. Or at least, you have to specify when you consider two numbers to be "close".

All we can say is that, since 3/4=0.75, the two numbers are

[tex]0.963-0.75=0.213[/tex]

units apart. Is this small enough to consider them as "close"? Is this big enough to consider them not to be "close"?

You should clarify more what you mean so that a definitive answer can be given.

The price-demand equation for gasoline is 0.1 x + 4 p = 85 where p is the price per gallon in dollars and x is the daily demand measured in millions of gallons.a. What price should be charged if the demand is 40 million gallons?b. If the price increases by $0.4 by how much does the demand decrease?

Answers

Answer:

a. The price that should be charged if the demand is 40 million gallons is $20.25.

b. The demand decreases by 16 millions of gallons.

Step-by-step explanation:

We know that the price-demand equation for gasoline is given by

[tex]0.1 x + 4 p = 85[/tex]

where

p is the price per gallon in dollars and

x is the daily demand measured in millions of gallons.

a. To find what price should be charged if the demand is 40 million gallons you must

Solve for p,

[tex]0.1x\cdot \:10+4p\cdot \:10=85\cdot \:10\\x+40p=850\\40p=850-x\\p=\frac{850-x}{40}[/tex]

We know that the demand is 40 million gallons (x = 40). So,

[tex]p=\frac{850-40}{40}=\frac{81}{4}=20.25[/tex]

b. To find how much does the demand decrease when the price increases by $0.4 you must

Solve for x,

[tex]0.1x\cdot \:10+4p\cdot \:10=85\cdot \:10\\x+40p=850\\x=850-40p[/tex]

We know that the price increases by $0.4. So,

[tex]-40\left(0.4\right)=-16[/tex]

The demand decreases by 16 millions of gallons.

Final answer:

When the demand is 40 million gallons, the price per gallon should be $20.25. The impact of a $0.4 price increase on the demand can be calculated by substitifying p in the equation, solving for x, and subtracting the original x value.

Explanation:

The subject of this question is algebra, specifically dealing with the use of equations representing real-world scenarios. In this case, the equation represents price-demand dynamics for gasoline.

a. To find the price that should be charged when the demand is 40 million gallons, substitute x with 40 in the equation, which gives 0.1 * 40 + 4p = 85. By simplifying this, we get 4 + 4p = 85. Further solving for p, we get 4p = 81, therefore p = 81 / 4, which is $20.25 per gallon.

b. When the price increases by $0.4, substitute p with p + 0.4 in the equation. This gives 0.1x + 4(p + 0.4) = 85. Solving this for x, and then subtracting the original x value, gives us the decrease in demand due to the increase in price.

Learn more about Price-Demand Equation here:

https://brainly.com/question/34931653

#SPJ3

There are five sales associates at Mid-Motors Ford. The five associates and the number of cars they sold last week are: Sales Associate Cars Sold Peter Hankish 8 Connie Stallter 6 Juan Lopez 4 Ted Barnes 10 Peggy Chu 6

a. How many different samples of size 2 are possible?

b. List all possible samples of size 2, and compute the mean of each sample.

c. Compare the mean of the sampling distribution of the sample mean with that of the

population.

Answers

Answer:

a) There are 10 different samples of size 2.

b) See the explanation section

c) See the explanation section

Step-by-step explanation:

a) We need to select a sample of size 2 from the given population of size 5. We use combination to get the number of difference sample.

[tex]\{ {{5} \atop {2}} \} = \frac{5!}{2!(5-2)!} \\= \frac{5!}{2!3!} \\= \frac{120}{2*6} \\= \frac{120}{12} \\=10[/tex]

b) Possible sample of size 2:

Peter Hankish 8 Connie Stallter 6 Juan Lopez 4 Ted Barnes 10 Peggy Chu 6

Peter Hankish and Connie Stallter ( Mean = (8 + 6)/2 = 14/2 = 7)Peter Hankish and Juan Lopez (Mean = (8 + 4)/2 = 12/2 = 6)Peter Hankish and Ted Barnes (Mean = (8 + 10)/2 = 18/2 = 9)Peter Hankish and Peggy Chu (Mean = (8 + 6)/2 = 14/2 = 7)Connie Stallter and Juan Lopez (Mean = (6 + 4)/2 = 10/2 = 5)Connie Stallter and Ted Barnes (Mean = (6 + 10)/2 = 16/2 = 8)Connie Stallter and PeggyChu (Mean = (6 + 6)/2 = 12/2 = 6)Juan Lopez and Ted Barnes (Mean = (4 + 10)/2 = 14/2 = 7)Juan Lopez and Peggy Chu (Mean = (4 + 6)/2 = 10/2 = 5)Ted Barnes and Peggy Chu (Mean = (10 + 6)/2 = 16/2 = 8)

c) The mean of the population is:

[tex]mean = \frac{(8+6+4+10+6)}{5} \\= \frac{34}{5} \\= 6.8[/tex]

Comparing the mean of the population and the sample; we can say that most of the 2-size sample have their mean higher than that of the population sample. And the variation with the mean is not much. Some sample have their mean greater than population mean, while some sample have their mean greater than the population mean.

This question is based on the statistics. Therefore, the answers of all the  questions are explained below.

Given:

There are five sales associates at Mid-Motors Ford. Sales Associate Cars Sold Peter Hankish 8 Connie Stallter 6 Juan Lopez 4 Ted Barnes 10 Peggy Chu 6.

(a) We have to find different samples of size 2 are possible.

Thus, we have to select sample of size 2 from given population of size 5.

So, by using combination,

[tex]5_{c_2} = \dfrac{5!}{2! (5-2)!} =\dfrac{120}{12} = 10[/tex]

Thus, 10  different samples of size 2 are possible.

(b) We have to find list all possible samples of size 2, and compute the mean of each sample.

Peter Hankish 8 ,Connie Stallter 6, Juan Lopez 4, Ted Barnes 10, Peggy Chu 6.

Peter Hankish and Connie Stallter ( Mean = [tex]\dfrac{8+6}{2} = 7[/tex] Peter Hankish and Juan Lopez (Mean =[tex]\dfrac{8+4}{2} = 6[/tex] Peter Hankish and Ted Barnes (Mean = [tex]\dfrac{8+10}{2} = 9[/tex] Peter Hankish and Peggy Chu (Mean = [tex]\dfrac{8+6}{2} = 7[/tex] Connie Stallter and Juan Lopez (Mean = [tex]\dfrac{4+6}{2} =5[/tex] Connie Stallter and Ted Barnes (Mean = [tex]\dfrac{10+6}{2} = 8[/tex] Connie Stallter and PeggyChu (Mean = [tex]\dfrac{6+6}{2} = 6[/tex] Juan Lopez and Ted Barnes (Mean = [tex]\dfrac{4+10}{2} = 7[/tex] Juan Lopez and Peggy Chu (Mean = [tex]\dfrac{4+6}{2} = 5[/tex] Ted Barnes and Peggy Chu (Mean = [tex]\dfrac{10+6}{2} = 8[/tex]

(c) The mean of the population is:

[tex]Mean = \dfrac{8+6+4+10+6}{5}\\\\Mean = \dfrac{34}{5}\\\\Mean = 6.8[/tex]

For more details, prefer this link;

https://brainly.com/question/19146184

Using disks or washers, find the volume of the solid obtained by rotating the region bounded by the curves y=1/x, y=0, x=1, and x=4 about the line y=−1.

Answers

The volume of the solid obtained by rotating the region about the line y=-1 is approximately 24.27π cubic units.

To find the volume of the solid formed by rotating the region about the line y=-1, we can use the washer method. Here's how:

1. Identify the washers:

Imagine rotating the shaded region between the curves y=1/x, y=0, x=1, and x=4 about the line y=-1. This will create a series of washers stacked on top of each other. Each washer will have a hole in the middle due to the rotation about the line y=-1.

2. Define the parameters for each washer:

The inner radius (r₁) of each washer is the distance from the line y=-1 to the curve y=1/x. This can be expressed as 1 + 1/x.

The outer radius (r₂) of each washer is the distance from the line y=-1 to the x-axis (y=0). This is simply 1.

The thickness (dx) of each washer is the infinitesimal change in x.

3. Set up the integral:

Since we are rotating about a horizontal axis, the volume of each washer can be calculated using the formula for the volume of a washer:

dV = π[(r₂)² - (r₁)²] dx

The total volume of the solid is then the sum of the volumes of all the washers, which can be represented by a definite integral:

V = ∫⁴ π[(1)² - (1 + 1/x)²] dx

4. Evaluate the integral:

This integral can be solved using the power rule and the sum rule for integration. Simplifying the result, you will get:

V = π[8x - 3ln(x + 1)] |⁴

Finally, evaluate the integral at the limits of integration (x = 1 and x = 4) and subtract the results to find the total volume of the solid:

V = π[(32 - 3ln(5)) - (8 - 3ln(2))] ≈ 24.27 π cubic units

Therefore, the volume of the solid obtained by rotating the region about the line y=-1 is approximately 24.27π cubic units.

In a data set with mean of 12 and standard deviation of 4, at least what percent of data falls between 4 and 20?

Answers

Answer:

At least 95% of data falls between 4 and 20.

Step-by-step explanation:

The Empirical Rule states that, for a normally distributed random variable:

68% of the measures are within 1 standard deviation of the mean.

95% of the measures are within 2 standard deviation of the mean.

99.7% of the measures are within 3 standard deviations of the mean.

In this problem, we have that:

Mean = 12

Standard deviation = 4

At least what percent of data falls between 4 and 20?

4 = 12 - 2*4

So 4 is two standard deviations below the mean

20 = 12 + 2*4

So 20 is two standard deviations above the mean

By the Empirical Rule, at least 95% of data falls between 4 and 20.

Clay on the deep seafloor accumulates at a rate of about 1 millimeter per 1,000 years. How long would it take to accumulate 5 centimeters of clay?

Answers

Answer:

It will take 50,000 years to accumulate 5 centimeters of clay.

Step-by-step explanation:

The relationship between millimeter and centimer is that:

1ml = 0.1cm

So

How many ml are 5 cm?

1 ml - 0.1cm

x ml - 5cm

[tex]0.1x = 5[/tex]

[tex]x = \frac{5}{0.1}[/tex]

[tex]x = 50[/tex] ml

Clay on the deep seafloor accumulates at a rate of about 1 millimeter per 1,000 years. How long would it take to accumulate 5 centimeters of clay?

5cm is 50 ml.

1 ml per 1000 years.

So

1 ml - 1000 years

50 ml - x years

[tex]x = 50*1000[/tex]

[tex]x = 50,000[/tex]

It will take 50,000 years to accumulate 5 centimeters of clay.

Answer:

It will take 50000 years to accumulate 5 centimeters of clay.

Step-by-step explanation:

Clay on the deep seafloor accumulates at a rate of about 1 millimeter per 1,000 years. To determine the amount of time it will take to accumulate 5 centimeters of clay, we would convert 5 centimeters to millimeters.

1 centimeter = 10 millimeters

5 centimeters = 5 × 10 = 50 millimeters

Therefore,

If 1 millimeter = 1000 years,

Then, 50 millimeters = 50 × 1000 =

50000 years.

Production managers on an assembly line must monitor the output to be sure that the level of defective products remains small. They periodically inspect a random sample of the items produced. If they find a significant increase in the proportion of items that must be rejected, they will halt the assembly process until the problem can be identified and repaired.

a. In this context, what is a Type I error?
b. In this context, what is a Type II error?
c. Which type of error would the factory owner consider more serious?
d. Which type of error might customers consider more serious?

Answers

Answer:

(a) Type I error in our context is that our test indicates that the proportion of defective products has increased after inspecting but in actual the proportion of defective products was small.

(b) Type II error in our context is that our test indicates that the proportion of defective products has remained small after inspecting but in actual the proportion of defective products was increased.

(c) Factory owner would consider Type 1 error more serious.

(d) Customers will consider Type II error more serious.

Step-by-step explanation:

     Let  [tex]H_0[/tex] = Proportion of defective products remains small

            [tex]H_1[/tex] = Proportion of defective products increases

(a) Type I error represents that we have rejected our null hypothesis given the fact that null hypothesis is True.

Interpretation of this Type I error in our context is that our test indicates that the proportion of defective products has increased after inspecting but in actual the proportion of defective products was small.

(b) Type II error represents that we have accepted our null hypothesis given the fact that null hypothesis is False.

Interpretation of this Type II error in our context is that our test indicates that the proportion of defective products has remained small after inspecting but in actual the proportion of defective products was increased.

(c) Factory owner would consider Type 1 error more serious because after inspecting and testing he assumed that the proportion of defective products  has increased due to which he will halt the assembly process till the time the problem is identified and is repaired but in actual he should continue his  assembly process as in actual the proportion of defective products was small.

(d) Customers will consider Type II error more serious because after inspecting and testing factory owner assumed that the proportion of defective products is small and he will keeps on producing products and assembly process will keeps on going but in actual the proportion of defective products was increased and due to which customers will not get good quality products and they will not be able to purchase the products further.

a. Type I Error: Incorrectly concluding there's a significant increase in defective items when there isn't, leading to unnecessary halting of the assembly line.

b. Type II Error: Failing to detect a real increase in defective items, allowing the assembly to continue with actual defects.

c. The factory owner would consider a Type II error more serious.

d. Customers might find a Type I error more serious due to potential delays and disruptions in product availability.

In the context of the assembly line production process:

a. Type I error: Rejecting a null hypothesis (assuming there is no significant increase in defective products) when it is actually true.

This means that the production line is falsely halted due to the mistaken belief that there is a problem when there actually isn't. This can lead to unnecessary downtime, lost productivity, and increased costs.

b. Type II error: Failing to reject a null hypothesis (assuming there is no significant increase in defective products) when it is actually false.

This means that the production line continues to operate despite the presence of a problem that is causing an increase in defective products. This can lead to subpar products being shipped to customers, damaging the company's reputation and potentially leading to recalls or lawsuits.

c. The factory owner would consider a Type II error to be more serious.

A Type II error allows defective products to reach customers, which can damage the company's reputation, lead to recalls or lawsuits, and erode customer trust. While a Type I error can cause some inconvenience and expense, it is ultimately better to err on the side of caution and halt production if there is any suspicion of a problem.

d. Customers might consider a Type I error to be more serious.

Customers would prefer to receive products that are free of defects, even if it means that production is occasionally halted unnecessarily. A Type I error ensures that defective products are not shipped to customers, while a Type II error allows defective products to reach customers, which can cause inconvenience, frustration, and even safety hazards.

Suppose that a recent poll of American households about car ownership found that for households with a car, 39% owned a sedan, 33% owned a van, and 7% owned a sports car. Suppose that three households are selected randomly and with replacement. What is the probability that at least one of the three randomly selected households own a sports car

Answers

Answer:

The probability that of the 3 households randomly selected at least 1 owns a sports car is 0.1956.

Step-by-step explanation:

Let X = number of household owns a sports car.

The probability of X is, P (X) = p = 0.07.

Then the random variable X follows a Binomial distribution with n = 3 and p = 0.07.

The probability function of a binomial distribution is:

[tex]P(X=x) = {n\choose x}p^{x}[1-p]^{n-x}\\[/tex]

Compute the probability that of the 3 households randomly selected at least 1 owns a sports car:

[tex]P(X\geq 1)=1-P(X<1)\\=1-P(X=0)\\=1- {3\choose 0}(0.07)^{0}[1-0.07]^{3-0}\\=1-0.8044\\=0.1956[/tex]

Thus, the probability that of the 3 households randomly selected at least 1 owns a sports car is 0.1956.

By the fourth quarter of 2015, U.S. households had accumulated $12.5 trillion in housing equity, which represents about 14 percent of their net worth. What proportion of U.S. households own their home

Answers

Answer:

two-thirds

Step-by-step explanation:

In 2015, there was a campaign for the accumulation of households in the United States of America. Most of the citizens tried their best possible to acquire property in terms of buildings and other facilities. In the last quarter of the year, approximately two-thirds of the home in the United States of America were owned by households.

There are three workstations available having steady-state probabilities of 0.99, 0.95, 0.85 of being available on demand. What is the probability that at least two of the three will be available at any given time?

Answers

Answer:

99.065% probability that at least two of the three will be available at any given time.

Step-by-step explanation:

We have these following probabilities:

99% probability of the first workstation being available

95% probability of the second workstation being available

85% probability of the third workstation being avaiable

Two being available:

We can have three outcomes

First and second available, third not. So

0.99*0.95*0.15 = 0.141075

First and third available, second not. So

0.99*0.05*0.85 = 0.042075

Second and third available, first not. So

0.01*0.95*0.85 = 0.008075

Adding them all

P(2) = 0.141075 + 0.042075 + 0.008075 = 0.191225

Three being available:

P(3) = 0.99*0.95*0.85 = 0.799425

What is the probability that at least two of the three will be available at any given time?

P = P(2) + P(3) = 0.191225 + 0.799425 = 0.99065

99.065% probability that at least two of the three will be available at any given time.

Final answer:

The probability that at least two out of the three workstations are available is 0.967.

Explanation:

We can find the probability that at least two out of the three workstations are available using the concept of complementary events. The probability of at least two workstations being available is equal to 1 minus the probability of none or only one workstation being available.

Let's calculate the probability of none or only one workstation being available:

Probability of none being available: 0.01 * 0.05 * 0.15 = 0.00075
Probability of only one being available: (0.99 * 0.05 * 0.15) + (0.01 * 0.95 * 0.15) + (0.01 * 0.05 * 0.85) = 0.03225

Now, subtracting this from 1:

1 - (0.00075 + 0.03225) = 0.967

Therefore, the probability that at least two out of the three workstations are available at any given time is 0.967.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ3

A house worth $180,000 has a coinsurance clause of 75 percent. The owners insure the property for $101,250. They then have a loss that results in a $50,000 claim. They will receive $ ____.00 from insurance.

Answers

Answer:

$37,500

Step-by-step explanation:

We have been given that a house worth $180,000 has a coinsurance clause of 75 percent. The owners insure the property for $101,250. They then have a loss that results in a $50,000 claim.

We will use loss settlement formula to solve our given problem.

[tex]\text{Loss settlement}=\frac{\text{Loss}\times\text{Limit of insurance}}{\text{Actual cash value}\times \text{Coinsurance}\%}[/tex]

Upon substituting our given values, we will get:

[tex]\text{Loss settlement}=\frac{\$50,000\times\$101,250}{\$180,000\times 75\%}[/tex]

[tex]\text{Loss settlement}=\frac{\$50,000\times\$101,250}{\$180,000\times 0.75}[/tex]

[tex]\text{Loss settlement}=\frac{\$5,062,500,000}{\$135,000}[/tex]

[tex]\text{Loss settlement}=\$37,500[/tex]

Therefore, they will receive $37,500 from insurance.

The correct answer is $37,500. A house worth $180,000 has a coinsurance clause of 75 percent. The owners insure the property for $101,250. They then have a loss that results in a $50,000 claim. They will receive $37,500.00 from insurance.

A house worth $180,000 has a coinsurance clause of 75 percent. This means the owners must insure the house for at least 75% of its value to receive full coverage on claims. The required coverage amount is calculated as follows:

Required Insurance Coverage = 75% of $180,000 = 0.75 * $180,000 = $135,000

The owners insured the property for only $101,250. When a loss occurs, the amount received will be proportionate to the actual coverage relative to the required coverage:

[tex]Payout Ratio = \frac{Actual\ Insurance}{Required\ Insurance}[/tex]
[tex]Payout\ Ratio = \frac{\$ 101,250}{\$135,000} \approx 0.75[/tex]

Since the claim amount is $50,000, the actual payout from the insurance will be:

Insurance Payout = Payout Ratio * Claim Amount
Insurance Payout [tex]\approx[/tex] 0.75 * $50,000 = $37,500

Therefore, the owners will receive $37,500.00 from the insurance.

Suppose we know that the functions r and s are are everywhere differentiable and that u(3)=0. Suppose we also know that for 1 ≤ x ≤ 3, the area between the x-axis and the non negative functions h(x)=u(x)dv/dx is 15, and that on the same interval, the area between the x-axis and the non negative function k(x) = v(x)du/dx is 20. Determine u(1)v(1).

Answers

Integrating by parts, we have

[tex]\displaystyle\int_1^3\underbrace{u(x)\dfrac{\mathrm dv}{\mathrm dx}}_{h(x)}\,\mathrm dx=u(3)v(3)-u(1)v(1)-\int_1^3\underbrace{v(x)\dfrac{\mathrm du}{\mathrm dx}}_{k(x)}\,\mathrm dx[/tex]

We're given [tex]u(3)=0[/tex] and [tex]\int_1^3h(x)\,\mathrm dx=15[/tex] and [tex]\int_1^3k(x)\,\mathrm dx=20[/tex]. So we have

[tex]15=-u(1)v(1)-20\implies\boxed{u(1)v(1)=-35}[/tex]

Scura makes sun block and their annual revenues depend on how much they sell. Let x be the quantity of 5 oz. bottles of sun block that they make and sell each year measured in 1000 's of bottles. Thus if x=10 then they make and sell 10000 bottles of sun block each year. If x=25 then they make and sell 25000 bottles of sun block each year.

a. If x=50 how many bottles of sun block does Scura make and sell?

b. What is x equal to if Scura produces and sells 45000 bottles of sunblock?

Answers

Answer:

a) 50,000 bottles

b) x = 45

Step-by-step explanation:

We are given the following in the question:

The annual revenue of sun block depends on how much they sell.

Let x be the quantity of 5 oz. bottles of sun block that they make and sell each year measured in 1000 's of bottles.

For x = 10,

10,000 bottles were made and sell each year.

For x = 25,

25,000 bottles of sun block were made and sell each year.

a) x = 50

[tex]\text{Number of bottles} = 50\times 1000 = 50,000[/tex]

Thus, 50,000 bottles of sun block does Scura make and sell.

b) Scura produces and sells 45000 bottles of sunblock

We have to find the value of x

[tex]x = \displaystyle\frac{\text{Number of bottles}}{1000} = \frac{45000}{1000} = 45[/tex]

Thus, x = 45 if Scura produces and sells 45000 bottles of sunblock.

Final answer:

For Scura's Sunblock Sales, if x=50, they sell 50,000 bottles, and when Scura sells 45,000 bottles of sunblock, x equals 45.

Explanation:Answer to Scura's Sunblock Sales

a. If x=50, then according to the relationship given where x represents thousands of bottles, Scura makes and sells 50,000 bottles of sun block.

b. To determine what x is equal to when Scura produces and sells 45,000 bottles of sunblock, we take the total number of bottles and divide by 1000, since x is measured in 1000s. So, x=45 when Scura produces and sells 45,000 bottles of sunblock.

A gas station stores its gasoline in a tank under the ground. The tank is a cylinder lying horizontally on its side. (In other words, the tank is not standing vertically on one of its flat ends.) If the radius of the cylinder is 0.5 meters, its length is 5 meters, and its top is 2 meters under the ground, find the total amount of work needed to pump the gasoline out of the tank. (The density of gasoline is 673 kilograms per cubic meter; use g=9.8 m/s2.)

Answers

Final answer:

The work needed to pump the gasoline out of the underground tank is approximately 51.7 kJ, calculated using the density of gasoline, the volume of the cylindrical tank, and the gravitational energy required to lift the gasoline 2 meters up to ground level.

Explanation:

The total amount of work needed to pump the gasoline out of the tank can be determined using the concepts of physics specifically mechanical work and fluid dynamics. We know the density of gasoline is 673 kg/m3, the gravitational acceleration is 9.8 m/s2, the cylinder's radius is 0.5 meters, its length is 5 meters, and the top of the cylinder is 2 meters below ground level. The total volume of the cylinder is given by the formula for the volume of a cylinder V = πr2h, where r is the radius and h is the length of the cylinder. In this case, V = π(0.5)2(5) ≈ 3.927 m3. The total mass m of the gasoline can be calculated by multiplying the density of gasoline by the volume, m = density × volume = 673 kg/m3 × 3.927 m3 ≈ 2643.871 kg.

Since the gas tank is underground, the work done to lift the gasoline to ground level is W = mgh, where m is the mass of the gasoline, g is acceleration due to gravity, and h is the height the gasoline is lifted. We must lift the gasoline 2 meters to reach ground level, so the work done is W = 2643.871 kg × 9.8 m/s2 × 2 m ≈ 51738.7856 J or 51.7 kJ (since 1 J = 1 kg·m2/s2). Thus, the work required to pump the gasoline out of the tank would be approximately 51.7 kJ.

The manager of the local grocery store has determined that, on average, 4 customers use the service desk every half-hour. Assume that the number of customers using the service desk has a Poisson distribution. What is the probability that during a randomly selected half-hour period, exactly 2 customers use the service desk

Answers

Answer:

There is a 14.65% probability that during a randomly selected half-hour period, exactly 2 customers use the service desk.

Step-by-step explanation:

In a Poisson distribution, the probability that X represents the number of successes of a random variable is given by the following formula:

[tex]P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}[/tex]

In which

x is the number of sucesses

[tex]e = 2.71828[/tex] is the Euler number

[tex]\mu[/tex] is the mean in the given time interval.

The manager of the local grocery store has determined that, on average, 4 customers use the service desk every half-hour.

This means that [tex]\mu = 4[/tex]

What is the probability that during a randomly selected half-hour period, exactly 2 customers use the service desk?

This is P(X = 2). So

[tex]P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}[/tex]

[tex]P(X = 2) = \frac{e^{-4}*(4)^{2}}{(2)!} = 0.1465[/tex]

There is a 14.65% probability that during a randomly selected half-hour period, exactly 2 customers use the service desk.

You draw five cards at random from a standard deck of 52 playing cards. What is the probability that the hand drawn is a full house? (A full house is a hand that consists of two of one kind and three of another kind.)

Answers

Answer:

The probability that the hand drawn is a full house is 0.00144.

Step-by-step explanation:

In a full house we have a hand that consists of two of one kind and three of another kind, i.e 5 cards are selected.

The number of ways of selecting 5 cards from 52 cards is:

                          [tex]{52\choose 5} = \frac{52!}{5!(52-5)!} \\=\frac{52!}{5!\times47!} \\=2598960[/tex]

In a deck of 52 cards there are 13 kind of cards, namely{K, Q, J, A, 2, 3, 4, 5, 6, 7, 8, 9, 10}.

Two kinds can be selected in, [tex]{13\choose 2}=\frac{13!}{2!\times(13-2)!} =\frac{13!}{2!\times11!} =78[/tex] ways

One of the two kinds can be selected for 3 cards combination in [tex]{2\choose 1} = 2[/tex] ways.

There are 4 cards of each kind.

So 3 cards combination can be selected from any of the two kinds in [tex]{4\choose 3} =\frac{4!}{3!(4-3)!} =4[/tex] ways.

And 2 cards combination can be selected from any of the two kinds in [tex]{4\choose 2} =\frac{4!}{2!(4-2)!} =6[/tex] ways.

Thus, total number of ways to select a full house is:

[tex]{13\choose 2}\times{2\choose 1}\times{4\choose 3}\times{4\choose 2}\\=78\times2\times4\times6\\=3744[/tex]

The probability that the hand drawn is a full house is:

[tex]\frac{Number\ of\ ways\ of\ Drawing\ a\ Full\ house)}{Number\ of\ ways\ of\ Selecting\ 5\ cards } =\frac{3744}{2598960} =0.00144[/tex]

Thus, the probability of playing a full house is 0.00144.

Driving under the influence of alcohol (DUI) is a serious offense. The following data give the ages of a random sample of 50 drivers arrested while driving under the influence of alcohol. This distribution is based on the age distribution of DUI arrests given in the Statistical Abstract of the United States46 16 41 26 22 33 30 22 36 3463 21 26 18 27 24 31 38 26 5531 47 27 43 35 22 64 40 58 2049 37 53 25 29 32 23 49 39 4024 56 30 51 21 45 27 34 47 35(b) Make a frequency table using seven classes.Class Limits... Class Boundaries...Midpoint...Frequency...RelativeFrequency...CumulativeFrequency

Answers

Answer:

Explanation below.

Step-by-step explanation:

For this case we have the following dataset:

46, 16, 41, 26, 22 ,33, 30, 22 ,36, 34,

63, 21, 26, 18, 27, 24, 31, 38, 26, 55,

31,  47, 27, 43 ,35, 22 ,64,40, 58, 20,

49, 37, 53, 25, 29, 32, 23, 49, 39, 40,

24, 56, 30, 51, 21, 45, 27, 34, 47, 35

So we have 50 values. The first step on this case would be order the dataset on increasing way and we got:

16, 18, 20, 21, 21, 22, 22, 22, 23, 24,

24, 25, 26, 26, 26, 27, 27, 27, 29, 30

30, 31, 31, 32, 33, 34, 34, 35, 35, 36,

37, 38, 39, 40, 40, 41, 43, 45, 46, 47,

47, 49, 49, 51, 53, 55, 56, 58, 63, 64

We can find the range for this dataset like this:

[tex] Range = Max-Min = 64-16 =48[/tex]

Then since we need 7 classes we can find the length for each class doing this:

[tex] W = \frac{48}{7}=6.86[/tex]

And now we can define the classes like this and counting how many observations lies on each interval we got the frequency:

  Class           Frequency      Midpoint           RF                   CF

________________________________________________

[16-22.86)              8               19.43         (8/50)=0.16           0.16

[22.86-29.71)         11              26.29        (11/50)=0.22          0.38

[29.71-36.57)         11               33.14         (11/50)=0.22          0.6

[36.57-43.43)         7               40.0          (7/50)=0.14           0.74

[43.43-50.29)        6               46.86        (6/50)=0.12          0.86

[50.29-57.14)         4               53.72        (4/50)=0.08         0.94

[57.14-64]               3               60.57        (3/50)=0.06           1.0

________________________________________________

Total                         50                                         1.00

RF= Relative frequency. CF= Cumulative frequency

The relative frequency was calculated as the individual frequency for a class divided by the total of observations (50)

The mid point is the average between the limits of the class.

And the cumulative frequency is calculated adding the relative frequencies for each class.

A blood sample with a known glucose concentration of 102.0 mg/dL is used to test a new at home glucose monitor. The device is used to measure the glucose concentration in the blood sample five times. The measured glucose concentrations are 104.5 , 96.2 , 102.2 , 98.3 , and 101.8 mg/dL. Calculate the absolute error and relative error for each measurement made by the glucose monitor. A. 104.5 mg/dL absolute error = 2.5 mg / dL relative error = 0.025 B. 96.2 mg/dL absolute error = −5.8 mg / dL relative error = 0.057 C. 102.2 mg/dL absolute error = 0.2 mg / dL relative error = 0.020 D. 98.3 mg/dL absolute error = −3.7 mg / dL relative error = 0.036 E. 101.8 mg/dL absolute error = −0.2 mg / dL relative error =

Answers

Answer:

The Absolute Error is the difference between the actual and measured value.

[tex]Absolute \:error = |Actual \:value - Measured \:value|[/tex]

The Relative Error is the Absolute Error divided by the actual measurement.

[tex]Relative \:error = \frac{Absolute \:error}{Actual \:value}[/tex]

We know that the actual value is 102.0 mg/dL.

To find the absolute error and relative error for each measurement made by the glucose monitor you must use the above definitions.

a) For a concentration of 104.5 mg/dL the absolute error and relative error are

[tex]Absolute \:error = \left|102-104.5\right|\\Absolute \:error =\left|-2.5\right|\\Absolute \:error =2.5[/tex]

[tex]Relative \:error = \frac{2.5}{102.0}=0.0245[/tex]

b) For a concentration of 96.2 mg/dL the absolute error and relative error are

[tex]Absolute \:error = \left|102.0-96.2\right|\\Absolute \:error =\left|5.8\right|\\Absolute \:error =5.8[/tex]

[tex]Relative \:error = \frac{5.8}{102.0}=0.0569[/tex]

c) For a concentration of 102.2 mg/dL the absolute error and relative error are

[tex]Absolute \:error = \left|102.0-102.2\right|\\Absolute \:error =\left|-0.2\right|\\Absolute \:error =0.2[/tex]

[tex]Relative \:error = \frac{0.2}{102.0}=0.00196[/tex]

d) For a concentration of 98.3 mg/dL the absolute error and relative error are

[tex]Absolute \:error = \left|102.0-98.3\right|\\Absolute \:error =\left|3.7\right|\\Absolute \:error =3.7[/tex]

[tex]Relative \:error = \frac{3.7}{102.0}=0.0363[/tex]

e) For a concentration of 101.8 mg/dL the absolute error and relative error are

[tex]Absolute \:error = \left|102.0-101.8\right|\\Absolute \:error =\left|0.2\right|\\Absolute \:error =0.2[/tex]

[tex]Relative \:error = \frac{0.2}{102.0}=0.00196[/tex]

A short quiz has two true-false questions and one multiple-choice question with four possible answers. A student guesses at each question. Assuming the choices are all equally likely and the questions are independent of each other, the following is the probability distribution of the number of answers guessed correctly. What is the Probability of getting less than all three right

Answers

Final answer:

This probability question in Mathematics aims to calculate the chances of guessing answers correctly on quizzes or exams with true-false and multiple-choice questions.

The probability of getting less than all three right on the quiz with true-false and multiple-choice questions can be calculated by summing the probabilities of getting 0, 1, or 2 correct answers.

Explanation:

Probability of Getting Less Than All Three Right:

For the quiz described, the probability distribution of the number of correct answers is as follows:

0 correct: 1/8

1 correct: 3/8

2 correct: 3/8

3 correct: 1/8

To find the probability of getting less than all three right, you would add the probabilities of getting 0, 1, or 2 correct, which is 1/8 + 3/8 + 3/8 = 7/8.

A typical incoming telephone call to your catalog sales force results in a mean order of $28.63 with a standard deviation of $13.91. You may assume that orders are received independently of one another. a. Based only on this information, can you find the probability that a single incoming call will result in an order of more than $40? Why or why not? b. An operator is expected to handle 110 incoming calls tomorrow. Find the mean and standard devi- ation of the resulting total order. c. What is the approximate probability distribution of the total order to be received by the operator in part b tomorrow? How do you know? d. Find the (approximate) probability that the operator in part b will generate a total order of more than $3,300 tomorrow. e. Find the (approximate) probability that the operator in part b will generate an average order between $27 and $29 tomorrow.

Answers

Answer:

Step-by-step explanation:

Hello!

The study variable for this exercise is:

X: Price of an order of a sales catalog placed per telephone.

You don't have information about the distribution of this variable, but you know that the mean is μ= $28.63 and the standard deviation is σ= $13.91

a. You need to calculate the probability of a single incoming call resulting in an order of more than $40, symbolically P(X>$40). To be able to calculate this probability you need to know what the distribution of the variable is. Without knowing the form of the distribution, i.e. the probability density function, you cannot tell what is the asked probability.

b. If the operator is expected to handle 110 calls in a day (tomorrow) this means that you have a sample of n= 110 calls, and in each call, you are going to take the information of the order placed by the customer.

Note:

If X₁, X₂, ..., Xₙ be the n random variables that constitute a sample, then any function of type θ = î (X₁, X₂, ..., Xₙ) that depends solely on the n variables and does not contain any parameters known, it is called the estimator of the parameter.

When the function i (.) It is applied to the set of the n numerical values ​​of the respective random variables, a numerical value is generated, called parameter estimate θ.

This follows the concepts:

1) The function i (.) It is a function of random variables, so it is also a random variable, that is to say, that every estimator is a random variable.

2) From the above, it follows that Î has its probability distribution and therefore mathematical hope, E (î), and variance, V (î).

And:

The central limit theorem states that if a population with probability function f(X;μ,δ²) from which a random sample of size n is selected. Then the distribution of the sample mean tends to the normal distribution with mean μ and variance δ²/n when the sample size tends to infinity.

As a rule, a sample of size greater than or equal to 30 is considered sufficient to apply the theorem and use the approximation.

This means that if you have the study variable X with a certain distribution, then it's the sample mean X[bar], that is also an aleatory variable, will have the same distribution as it's origin variable. On the other hand, if the distribution of the said variable is unknown, so will be the distribution of its sample mean, but if the sample is large enough, then you can apply the central limit theorem and approximate the distribution of the sample mean to normal, symbolically:

X~?(μ;δ²) and n ≥ 30 then X[bar]≈N(μ;δ²/n )

The mean of said approximation is the same as the mean of the variable of origin.

μ= $28.63

And the standard deviation will be the same as the original variable but affected by the sample size:

δ/√n = $13.91/110= $0.126 ≅ $0.13

c.  X[bar]≈N(μ;δ²/n )

d. Using the aproximation you can calculate the asked probabilities with the standard normal:

P(X[bar] > $3,300) = P(Z > [tex]\frac{3.300- 28.63}{13.91/\sqrt{110} }[/tex]) = P(Z > -19.098)= 0

e.

P(27 < X[bat] < 29) = P(X<29) - P(X<27) = P(Z<[tex]\frac{29-28.63}{0.13}[/tex]) - P(Z<[tex]\frac{27-28.63}{0.13}[/tex])

P(Z<0.278) - P(Z<-1.229)= 0.609 - 0.110= 0.499

I hope it helps!

Other Questions
Delta Airlines quotes a flight time of 2 hours, 5 minutes for its flights from Cincinnati toTampa. Suppose we believe that actual flight times are uniformly distributed between 2 hours and 2 hours, 20 minutes.a. Show the graph of the probability density function for flight time.b. What is the probability that the flight will be no more than 5 minutes late?c. What is the probability that the flight will be more than 10 minutes late?d. What is the expected flight time? The nurse is speaking with the parents of a school-aged child recently diagnosed with diabetes mellitus regarding the differences between hypoglycemia and hyperglycemia. Which statement by a parent indicates a need for further teaching? Prior to the elucidation of the genetic code, prominent scientists, including Francis Crick, had predicted that each mRNA codon, coding for one of the 20 amino acids, needed to be at least three nucleotides long. Why is it not possible for codons to be any shorter? Select the correct answer from each drop-down menu.Read the excerpt from Sir Gawain and the Green Knight, and complete the sentence. Select the correct answer. Which form of relativism states that people rely on their own standards of right and wrong when making a decision? A. nave relativism B. role relativism C. social relativism D. cultural relativism E. habitual relativism (9^(3))^(3) =9 99 09 681 For consideration, Hazel orally promises to pay Jill $750 a month, on the first day of every month, for as long as Jill lives. Hazel makes the payments regularly for the first seven months and then makes no further payments. Jill claims that Hazel has breached the oral contract and sues Hazel for damages. Hazel contends that the contract is unenforceable because, under the Statute of Frauds, contracts that cannot be performed within one year must be in writing. Discuss whether Hazel will succeed in this defense. (X to the fourth power) squared equals Which element would you expect to be less metallic?(a) Sb or As (b) Si or P (c) Be or Na How do you simply 5\8 and 3\10 Like many plans to protectendangered species, the planto reintroduce wolves causessome people to weigh theirown interests against theneeds of a single species. Doyou feel that the decision is asimple one? Can you think ofother ways to look at thisissue? Explain your answers. At Dwight Incorporated, total fixed and variable costs are $420,000 at a production level of 130,000 units. The company has total fixed costs of $225,000. The variable cost per unit at 200,000 units is ______. What is the oldest story ever told? What are crimes committed by an individual for personal gain and profit during the course of their occupation? Five-year-old Charlie decided that it was worth the risk of getting in trouble for climbing and jumping off the garage roof because it was something he thought would be really fun to try. According to Kohlberg, Charlie is operating in what stage of moral reasoning? What were two ordinances created under the Articles of Confederation? What did they achieve? 1. Los turistas no estn buscando (alguna/ninguna) _________ aventura. 2. Los turistas no conocen bien la isla y el gua (tampoco/tambin) __________. 3. El gua turstico (ni/no) __________ encontr el campamento (ni/no) _________ las ruinas. 4. (Algunos/Ningn) __________ turistas quieren regresar a la ciudad. When the value of t is 60, the value of c is 90 . Explain what this means using the problem context.Little help!!!!! Determine the empirical formula for c6n4o10 Although U.S. middle school students may lag behind their Japanese counterparts in international algebra tests, the differences disappear on later tests due to the greater comparative effectiveness of U.S. colleges:__________