You have a 2.0 M solution of LiF. You added 4.00 moles of LiF to a solvent to make this solution. What is the volume of this solution?

Answer: Human activities have affected more than D). 70 percent of the Earth's surface

Explanation:

Final answer:

Human activities have transformed over 50% of the Earth's surface, including significant land use changes and impacts on the climate due to emissions from burning fossil fuels.

Explanation:

Human activities have affected more than 50 percent of the Earth's surface. Humans have transformed a large portion of the Earth's land through the expansion of cropland and pasturelands, reduction of forest habitats, and acceleration in land conversion for agriculture and habitation. Human influence extends beyond the land to the oceans and atmosphere through practices like burning fossil fuels, which has contributed substantially to climate change.

Answer:

protists are part of the domain eukarya

protists make up the kingdom protista

hope this helps x

Answer: V= 44. 6 L

Explanation: use Boyle's Law

P1V1 = P2V2

Derive to find V2:

V2 = P1V1 / P2

= 937.57 Pa( 12.5 L ) / 262.52 Pa

= 44.6 L

The motion of Earth's plates are like slow and constant. The correct option is D.

Tectonic plates are massive chunks of the Earth's crust and upper mantle. They are composed of oceanic and continental crust.

Earthquakes occur near mid-ocean ridges and large faults that mark the plate boundaries.

The hot magma flows in convection currents due to tremendous heat and pressure within the earth. These currents usually result the tectonic plates that make up the earth's crust to move.

The Earth's tectonic plates are constantly shifting. Heat within the Earth drives their movement.

Hot material within the Earth rises as a result, until it reaches the surface, where it moves sideways, cools, and sinks. Convection is the name given to this circular motion.

Thus, the correct option is D.

For more details regarding tectonic plates, visit:

https://brainly.com/question/16944828

#SPJ2

Answer:

                       Moles  =  10.625 mol

Explanation:

             Molarity is the amount of solute dissolved per unit volume of solution. It is expressed as,

                         Molarity  =  Moles / Volume of Solution    ----- (1)

We can also rearrange this equation in terms of moles as,

                         Moles  =  Molarity × Volume of Solution  ------(2)

Data Given;

                  Molarity  =  4.25 mol.L⁻¹

                  Volume  =  2.50 L

Now, putting value of Molarity and Volume in eq. 2,

                        Moles  =  4.25 mol.L⁻¹ × 2.50 L

                        Moles  =  10.625 mol

6.72 L of Carbon Monoxide (CO) is needed.

Explanation:

First from the mass of the oxygen in grams is converted into moles and then it is proportionate to the moles of CO and then it is converted into its Volume in litres ( L).

4.8 g of O₂ × 1 mol of O₂× 2 mol CO ×22.4 L CO / (32 g of O₂ × 1 mol of O₂ × 1 mol of CO) = 6.72 L CO

The volume of CO reacted with oxygen at STP has been 6.72 L.

The moles of reactant and product in a balanced chemical equation has been given by the stoichiometric coefficient.

The balanced chemical equation for the formation of carbon dioxide has been:

[tex]\rm 2\;CO\;+\;O_2\;\rightarrow\;2\;CO_2[/tex]

The balanced chemical equation has been giving the information of 2 moles of CO reacted with a mole of oxygen.

The available moles of oxygen in 4.80 g has been:

[tex]\rm Moles\;=\;\dfrac{Mass}{Molar\;mass}\\\\ Moles\;O_2=\dfrac{4.80}{32}\\\\ Moles\;O_2=0.15\;mol[/tex]

The available moles of oxygen has been 0.15 mol.

The moles of CO reacted has been given by the stoichiometric coefficient of the balanced equation as:

[tex]\rm 1\;mol\;O_2=2\;mol\;CO\\0.15\;mol\;O_2=0.30\;mol\;CO[/tex]

The moles of CO reacted has been 0.30 mol.

The volume of a mole of gas at STP has been 22.4 L. The volume of 0.30 mol CO has been:

[tex]\rm 1\;mol=22.4\;L\\\\0.30\;mol=\dfrac{22.4}{1}\;\times\;0.30\;L\\\\ 0.30\;mol=6.72\;L[/tex]

The volume of CO reacted with oxygen has been 6.72 L.

Learn more about volume of gas, here:

https://brainly.com/question/1323061

Answer:

             The complete chemical equation is as;

                                          C + O₂   →   CO₂

Explanation:

                    According to law of mass conservation the mass in isolated system can neither be created nor be destroyed. Applying this law to given synthesis reaction means that,

               (i) If there is one carbon atom on left hand side of the equation (reactant side) then there must be on e carbon on right hand side (product side) of the equation.

                (ii) If there are two oxygen atoms on left hand side of the equation (reactant side) then there must be two oxygen atoms on right hand side (product side) of the equation.

Hence, from equation it is proved that it obeys the said law and the number of atoms on both side are equal i.e.

                           Reactant Side                     Product Side

Carbon                          1                                          1

Oxygen                          2                                         2

Answer:

The standard boiling point of an ideal solution is 100 degree celsius for a given composition. Mostly all given  solution of a given composition is a constant (boiling point 100 degrees) but not all composition is constant.

Explanation:

Answer:

the standard boiling point of an ideal solution of a given composition is constant. The normal boiling point of an ideal solution such as water is 99.97 °C (211.9 °F) at a pressure of 1 atm (i.e., 101.325 kPa).

Explanation:

Answer:

Sweat gland release moisture on the skin, cooling and relaxing the skin

Explanation:

Sweat gets sunken into your skin so it won't evaporate much.

Sweat is mainly water with a little bit of salts.

Whenever sweat evaporates, it tends to cool down the skin.  

Air bags help lessen injuries in an automobile crash.  --> Boyle's law

A helium balloon decreases in size when you put it into a freezer.  --> Charle's law

A can of spray paint will explode if tossed into a fire --> Gay Lussac's Law

Explanation:

- Boyle's law states that for a fixed mass of an ideal gas kept at constant temperature, the pressure of the gas (p) is inversely proportional to its volume (V):

[tex]p \propto V[/tex]

- Charle's law states that for a fixed mass of an ideal gas kept at constant pressure, the volume of the gas (V) is proportional to its absolute temperature (T):

[tex]V\propto T[/tex]

- Gay-Lussac's Law states that for a fixed mass of an ideal gas kept at constant volume, the pressure of the gas (p) is proportional to the absolute temperature (T):

[tex]p\propto T[/tex]

We can now use these three laws to explain the mentioned phenomena:

Air bags help lessen injuries in an automobile crash.  --> Boyle's law. In fact, as the volume of the gas inside the air bag increases, the pressure exerted by the gas inside decreases, and since the temperature is constant, the pressure exerted by the airbag on the passenger will be lower.

A helium balloon decreases in size when you put it into a freezer.  --> Charle's law. When the balloon is put into the freezer, its temperature decreases, and since the pressure inside the freezer is approx. constant, the volume of the balloon decreases as well.

A can of spray paint will explode if tossed into a fire --> Gay Lussac Law. Due to the fire, the temperature of the gas inside the can increases; since the volume is constant, the pressure will increase, and at some point it will be large enouth to cause the can to explode.

Learn more about ideal gases:

brainly.com/question/9321544

brainly.com/question/7316997

brainly.com/question/3658563

#LearnwithBrainly

The scenarios involving air bags, helium balloons in a freezer, and an exploding can of spray paint are explained by Gay-Lussac's Law and Charles's Law, relating to the pressure, temperature, and volume of gases.

The gas laws that explain each scenario provided are based on the relationships between pressure, volume, and temperature for a gas.

Answer:

Explanation:

5.6 mol

Answer: 96g

Explanation:

To find the mass of 2.40mol of NaOH, we must first obtain the molar mass of NaOH. This is illustrated below:

Molar Mass of NaOH = 23 + 16 + 1 = 40g/mol

From the question, we were asked to find the mass of 2.4moles of NaOH. This is done by the formula:

Mass = number of mole x molar Mass

Mass of NaOH = 2.4 x 40

Mass of NaOH = 96g

Answer:

The answer is Weight. The person who said mass is incorrect.

Explanation: Took the test and got it right

Answer:

Weight

Explanation:

It's weight cause it literally only makes sense no other answer would make sense.

Answer:

positive

Explanation:

lost of negative electron leaves one more positive charges than negative charges.

Answer:

C) They all have the same volume at the same temperature and pressure.

Explanation:

the answer on top of mine is wrong

All of these molecules have 0.5 number of moles. According to Avogadro's law, equal number of moles of gases contains equal volume at STP. Hence, option C is correct.

The condition of standard pressure and temperature is called STP. The temperature of 298 K and a pressure of 1 atm is called standard condition.

At STP the volume of one mole of every substance is 22.4 L.

Molecular mass of O₂ = 32 g/mol

molecular mass of N₂ = 28 g/mol

molar mass of CH₄ = 16 g/mol and

molecular mass of H₂ = 2 g/mol.

The given masses of each of these gases are half of their molar mass. Hence, they are all 0.5 moles. According to Avogadro's law, equal number of moles of different gases have the same volume at STP. Hence,  option C is correct.

Find more on Avogadro's law:

https://brainly.com/question/6534668

#SPJ2

Direction

Explanation:

In describing the displacement of a body, the directional attribute must be included or added to it.

Displacement is a vector quantity.

It is a length of path taken from start to finish of the motion of a body.

Coupled with this, the direction of the travel must also be included.

For example, Sam traveled in from Alaska to Florida with a displacement of 1000km south-east.

learn more:

Displacement https://brainly.com/question/5461768

#learnwithBrainly

Answer: 498.51mmHg

Explanation:

First let us analyse what was given from the question:

T1 = 425K

T2 = 275.15K

P1 = 770 mmHg

P2 =?

Using the general gas equation

P1V1/T1 = P2V2/T2

But we were told from the question that the volume is constant. So, our equation becomes:

P1/T1 = P2/T2

770/425 = P2 /275.15

Cross multiply to express in linear form:

P2 x 425 = 770 x 275.15

Divide both side by 425, we have:

P2 = (770 x 275.15) /425

P2 = 498.51mmHg

Answer:

h2*

Explanation:

No. of atoms included in 1245 mg is 0.127 *[tex]10^{23}[/tex] atoms.

Answer:

Explanation:

We know that we can determine the number of atoms in any given amount of sample by dividing the given weight to the atomic mass of the particular sample and then multiplying it with avagadro's number.

So, here the atomic mass of cobalt is 58.9 amu.

Thus,

No.of atoms  = [tex]\frac{1245 mg}{58.9g} * 6.023 * 10^{23}[/tex]

No. of atoms included in 1245 mg is 0.127 *[tex]10^{23}[/tex] atoms.

As we know that atomic mass of any element contains avagadro's number of atoms. So in order to find the number of atoms in a given weight of sample, we have to follow the above procedure.

No. of atoms included in 1245 mg is 0.127 *[tex]10^{23}[/tex] atoms.

Answer: 2.1 qt

Explanation: solution:

2L x 1 qt / 0.95 L = 2.1 qt

Answer:

Gravitational energy and thermal energy

Explanation:

A water cycle is a product of gravitational energy from the earth and thermal energy from the sun.

A water cycle is driven around with the help of hydroelectric energy. Now  hydroelectric energy is a product of potential energy that is converted into kinetic energy, with the help of gravitational energy, which again is also acquired from thermal energy from the sun.

Therefore, the correct answer is gravitational energy and thermal energy.

Answer:

Yeah

Explanation:

Mhm

Answer:

2 C2H6O2 + 5 O2 => 4 CO2 + 6H2O

Explanation: The chemical equation is now balanced.

Yo sup??

The correct answer is option C

the rest are aldehyde, carboxylic acid and ether respectively.

Hope this helps.

Answer:

212 degrees Fahrenheit

Answer: 212 degrees Fahrenheit

Final answer:

In a balanced chemical equation, if a coefficient is "1", it is typically left blank. Coefficients are used to ensure the same number of each atom on both sides of the equation and represent relative amounts of reactants and products in the simplest whole-number ratio.

Explanation:

The student's question is about understanding how coefficients are represented in a balanced chemical equation. When balancing chemical equations, it's important to adjust coefficients to ensure the same number of atoms of each element are on both sides of the equation. If a coefficient is "1", it is typically not written explicitly. For example, the balanced chemical equation for photosynthesis is 6CO2 + 6H2O → C6H12O6 + 6O2, where the coefficient of 1 for glucose is understood and therefore left blank. It's also critical to understand that coefficients should be in the simplest whole-number ratio, and they represent the relative amounts of substances involved in the reaction. For instance, when methane reacts with oxygen to yield carbon dioxide and water, the coefficients indicate a ratio of 1:2:1:2 for methane, oxygen, carbon dioxide, and water respectively.

Answer: 0.1 mole MgO

Explanation: 1 mole of MgO is equal to its molar mass.

4.00 MgO x 1 mole MgO/ 40g MgO

= 0.1 mole MgO

Answer:

only compounds with the (aq) state symbol

Only compounds with the an aqueous (aq) state symbol break up into ions in solution.

The solution in which water is present as solvent. The solute dissolved in water and form an ions which is surrounded by water molecules.

To learn more about aqueous solution here.

https://brainly.com/question/14097392

#SPJ2

Answer:

False

Explanation:

The biosphere includes all living organisms on Earth, which certainly includes fish in the ocean. However, the ocean is part of the hydrosphere, which is one of the Earth's spheres that encompasses all of its water, including oceans, lakes, rivers, and other bodies of water. So, the biosphere and hydrosphere are interconnected, but they are not the same thing.

1. Yes, the data supported my hypothesis.

2. Water refracted the light rays the most.

3. Air refracted the light rays the least.

4. Density affects refraction because the denser the material, the slower the speed of light in that material.

5. The light ray would be refracted very strongly.

6. Reflection, refraction, and absorption of light can be observed in mirrors, aquariums, and sunglasses.

Summary of lab results:

Reflection, refraction, and absorption of light can be observed in many everyday activities. For example, when you look in a mirror, you are seeing a reflection of yourself. When you look at a fish in an aquarium, you are seeing the refraction of light as it passes from the water into the air. And when you wear sunglasses, you are absorbing some of the sunlight, which helps to protect your eyes.

Interpretation of the results:

The results of the lab supported my hypothesis that the denser the material, the more it would refract light. The light rays were refracted the most when they passed from air into water, which is the denser of the two materials. The light rays were refracted the least when they passed from air into glass, which is the least dense of the three materials.

The density of a material affects how much it refracts light because the denser the material, the slower the speed of light in that material. When light travels from a less dense material to a denser material, it slows down and bends towards the normal. When light travels from a denser material to a less dense material, it speeds up and bends away from the normal.

The results of this lab can be used to explain many everyday phenomena, such as why diamonds sparkle so much. Diamonds are very dense materials, so they refract light very strongly. This is why when you look at a diamond, you see a rainbow of colors.

Reflection, refraction, and absorption of light in everyday activities:

Reflection, refraction, and absorption of light are all around us in our everyday activities. Here are a few examples:

To learn more about refraction, here

https://brainly.com/question/14760207

#SPJ2

Final answer:

In the lab investigation, glass refracted light the most, air the least, and density was found to significantly affect the degree of light refraction. A light ray passing through a diamond would exhibit a substantial amount of refraction due to the diamond's high density.

Explanation:

Conclusion: Interpretation of Lab Results

To conclude the investigation on refraction phenomena, it is essential to analyze the data collected and compare it to our initial hypothesis. When examining whether the data supported the hypothesis, it is crucial to reference specific evidence from the experiment. The hypothesis, in this case, may have been concerning the relationship between density and refraction of light through different materials.

Regarding which material refracted light rays the most, glass typically has a higher index of refraction compared to air and water, indicating that light rays bend more when passing through glass. Conversely, air refracted the light rays the least among the three because it has the lowest density and index of refraction.

Density is directly related to refraction; denser materials have higher indexes of refraction and therefore bend light to a greater degree. Given that diamonds are highly dense, a light ray projected from air through a diamond would undergo significant refraction, resulting in a high degree of bending.

In daily life, reflection can be observed in mirrors, refraction when looking at objects submerged in water, and absorption when objects do not reflect or transmit light visibly. Recalling these phenomena can aid in understanding their application and significance.

Mass of boron trifluoride is 35.768 g.

Firstly we need to write the balanced chemical equation involved in this question:

[tex]2B(s)+ 3F_2(g)[/tex] → [tex]2BF_3(g)[/tex]

It is given that:

Mass of fluorine= 30.0 g

So, we need to calculate moles of Fluorine

∵ Molar mass of fluorine= 38 g/mol

[tex]n= \frac{m}{M} = \frac{30.0g}{38 gmol^{-1}} = 0.789 mol[/tex]

Now, for 3 moles of F₂ ; 2 moles of BF₃ are produced.

So, for 0.789 moles of F₂, number of moles of  BF₃ will be:

[tex]\frac{2}{3} *0.789=0.526 \text{mol}[/tex]

Moles of  BF₃ =0.526 mol

∵ Molar mass of boron trifluoride =67.8 g/mol

Thus, mass of boron trifluoride can be calculated as:

[tex]m=n*M= 0.526*67.8=35.662 g[/tex]

⇒Mass of boron trifluoride is 35.768 g.

Learn more:

brainly.com/question/18050975

Not among the offered possibilities as the closest option is 53.0 grams. Using the stoichiometry of the balanced chemical equation for the reaction between boron (B) and fluorine to make boron trifluoride, we can calculate the mass of boron trifluoride (BF₃) that can be produced from 30.0 grams of fluorine (F₂).

The chemical formula is B + 3 F₂ BF₃, which is balanced.

One mole of boron combines with three moles of fluorine to form one mole of boron trifluoride, as shown by the equation.

First, we must change the amount of fluorine from grams to moles: (30.0 grams F₂) / (38.00 grams/mole F₂) = 0.789 moles F₂.

According to the stoichiometry, 3 moles of fluorine are converted into 1 mole of boron trifluoride. As a result, the amount of BF₃ that was created is similarly 0.789 moles.

Finally, by utilizing its molar mass, we can determine the mass of BF₃:

53.49 grams BF₃ are equal to (0.789 moles BF₃) times (67.81 grams/mole BF₃).

As a result, 30.0 grams of fluorine may be used to produce around 53.49 grams of boron trifluoride.

The estimated number is not exactly matched by any of the available response options. The response would be: Not among the offered possibilities as the closest option is 53.0 grams.

To know more about stoichiometry:

https://brainly.com/question/30215297

#SPJ6