Answer:
The statement and the expression is "credits = credits<0?0 : credits;" for the above question.
Explanation:
The conditional expression is an expression that is used to determine the true and the false case. It works like the if and the else statement.It has three parts which are shown above, in which the first part is to check the condition, the second part is excuted if the condition is true and the third part is executed if the condition is false. The variable is used to assign the value.If any user provides the credit value and writes the above statement then the credit variable holds 0 for negative value and it holds the original value for any positive or zero value.The Pentium 4 Prescott processor, released in 2004, had a clock rate of 3.6 GHz and voltage of 1.25 V. Assume that, on average, it consumed 10 W of static power and 90 W of dynamic power. The Core i5 Ivy Bridge, released in 2012, had a clock rate of 3.4 GHz and voltage of 0.9 V. Assume that, on average, it consumed 30 W of static power and 40 W of dynamic power. 1. For each processor find the average capacitive loads. 2. Find the percentage of the total dissipated power comprised by static power and the ratio of static power to dynamic power for each technology. 3. If the total dissipated power is to be reduced by 10%, how much should the voltage be reduced to maintain the same leakage current? Note: power is defined as the product of voltage and current.
Answer:
1. Capacitive load for pentium 4 prescott processor = 32 nF. Capacitive load for core i5 ivy processor = 29.05 nF
2. Percentage of total dissipated power comprised by static power for Pentium 4 Prescott processor = 10 %. The ratio of static power to dynamic power = 0.11
Percentage of total dissipated power comprised by static power for Core i5 Ivy Bridge processor = 42.86 %. The ratio of static power to dynamic power = 0.75
3. Reduction in voltage for Pentium 4 Prescott processor = 5.9 % reduction
Reduction in voltage for Core i5 Ivy Bridge processor = 9.8 % reduction
Explanation:
1. We know that dynamic power, P ≈ 1/2 CV²f where C is the capacitive load of the transistor, v its voltage and f the frequency.
So C ≈ 2P/V²f
For the Pentium 4 Prescott processor, V₁ = 1.25 V, f₁ = 3.6 GHz and P₁ = 90 W. Let C₁ be its capacitive load. So, C₁ ≈ 2P/V²f = 2 × 90 W/ (1.25 V)² × 3.6 × 10⁹ Hz = 3.2 × 10⁻⁸ F = 32 × 10⁻⁹ F = 32 nF
For the Core i% Ivy Bridge processor, V = 0.9 V, f = 3.4 GHz and P = 40 W. Let C₂ be its capacitive load. So, C₂ ≈ 2P/V²f = 2 × 40 W/ (0.9 V)² × 3.4 × 10⁹ Hz = 2.905 × 10⁻⁸ F = 29.05 × 10⁻⁹ F = 29.05 nF
2. Total power = static power + dynamic power.
For the Pentium 4 Prescott processor, static power = 10 W and dynamic power = 90 W. So, total power, P = 10 W + 90 W = 100 W.
The percentage of this total power that is static power = static power/total power × 100 = 10/100 × 100 = 10 %
The ratio of static power to dynamic power = static power/ dynamic power = 10/90 = 0.11
For the Core i5 Ivy Bridge processor, static power = 30 W and dynamic power = 40 W. So, total power, P = 30 W + 40 W = 70 W.
The percentage of this total power that is static power = static power/total power × 100 = 30/70 × 100 = 42.86 %
The ratio of static power to dynamic power = static power/ dynamic power = 30/40 = 0.75
3. We know Total power = static power + dynamic power. And that leakage current is due to static power. Since P = IV , I (leakage current) = P/ V
Since the total dissipated power is reduced by 10%, P₂ = (1 - 0.1)P₁ = 0.9P₁ where P₁ is the total power dissipated before the 10% reduction and P₂ is the new power dissipated after the 10% reduction in total dissipated power.
Let new total dissipated power, P₂ = new static power I₂V₂ + new dynamic power 1/2C₂V₂²f₂ = 0.9P₁.
For the Pentium 4 Prescott processor, P₂ = I₂V₂ + 1/2C₂V₂²f₂ = 0.9P₁. Since I₂(leakage current) = static power/voltage = 10 W/1.25 V = 8 A (since the leakage current is constant), we have
8 A × V₂ + 1/2 × 32 × 10⁻⁹ F × V₂² × 3.6 × 10⁹ Hz = 0.9 × 100
8V₂ + 57.6V₂² = 90. This leads to the quadratic equation
57.6V₂² + 8V₂ - 90 = 0. By the quadratic formula,
V₂ = [tex]\frac{-8 +/- \sqrt{8^{2} -4X57.6 X -90} }{2X57.6} = \frac{-8 +/- \sqrt{64 + 20736} }{115.2} = \frac{-8 +/- \sqrt{20800} }{115.2}\\=\frac{-8 +/- 144.222}{115.2}\\[/tex]
V₂ = 1.18 V or - 1.32 V .
Choosing the positive answer, the new voltage is 1.18 V. The percentage reduction is (new voltage - old voltage)/new voltage × 100 % = (1.18 - 1.25)/1.18 × 100 % = -0.07/1.18 × 100 % = -5.9 % . Which is a 5.9 % reduction from 1.25 V
For the Core i5 Ivy Bridge processor, P₂ = I₂V₂ + 1/2C₂V₂²f₂ = 0.9P₁. Since I₂(leakage current) = static power/voltage = 30 W/0.9 V = 33.33 A (since the leakage current is constant), we have
33.33 A × V₂ + 1/2 × 29.05 × 10⁻⁹ F × V₂² × 3.4 × 10⁹ Hz = 0.9 × 70
33.33V₂ + 49.385V₂² = 63. This leads to the quadratic equation
49.385V₂² + 33.33V₂ - 63 = 0. By the quadratic formula,
V₂ = [tex]\frac{-49.385 +/- \sqrt{49.385^{2} -4X33.33 X -63} }{2X33.33} = \frac{-49.385 +/- \sqrt{2438.8782 + 8399.916} }{66.66} = \frac{-49.385 +/- \sqrt{10838.794} }{66.66}\\=\frac{-49.385 +/- 104.110}{66.66}\\[/tex]
V₂ = 0.82 V or - 2.30 V .
Choosing the positive answer, the new voltage is 0.82 V. The percentage reduction is (new voltage - old voltage)/new voltage × 100 % = (0.82 - 0.9)/0.82 × 100 % = -0.08/0.82 × 100 % = -9.8 % . Which is a 9.8 % reduction from 0.9 V
After that So C ≈ 2P/V²f
After that For the Pentium 4 Prescott processor, V₁ = 1.25 V, f₁ = 3.6 GHz and P₁ = 90 W. then take C₁ be its capacitive load. So, C₁ ≈ 2P/V²f = 2 × 90 W/ (1.25 V)² × 3.6 × 10⁹ Hz = 3.2 × 10⁻⁸ F = 32 × 10⁻⁹ F = 32 nFSo that is For the Core i% Ivy Bridge processor, V = 0.9 V, f = 3.4 GHz and also P = 40 W. Let C₂ the capacitive load. So, C₂ ≈ 2P/V²f = 2 × 40 W/ (0.9 V)² × 3.4 × 10⁹ Hz = 2.905 × 10⁻⁸ F = 29.05 × 10⁻⁹ F = 29.05 nF
The next step will be Total power that is = static power + dynamic power.
When the Pentium 4 Prescott processor, static power that is = 10 W and dynamic power will be = 90 W. So, total power, P = 10 W + 90 W = 100 W. According to this total power that is static power will be= static power/total power × 100 = 10/100 × 100 = 10 % The ratio of static power to dynamic power will be = static power/ dynamic power = 10/90 = 0.11 For the next that Core i5 Ivy Bridge processor, static power = 30 W and dynamic power = 40 W. So, total power, P = 30 W + 40 W = 70 W. When The % of this total power that is static power = static power/total power × 100 = 30/70 × 100 = 42.86 % The ratio of static power to dynamic power will be = static power/ dynamic power = 30/40 = 0.75 When We know that Total power will be = static power + dynamic power. Since that P = IV , I (leakage current) = P/ V After that the total dissipated power is reduced by 10%, P₂ = (1 - 0.1)P₁ = 0.9P₁ where as P₁ is the total power dissipated before that the 10% reduction and that P₂ is the new power dissipated after the 10% reduction in total dissipated power. Let be new the total dissipated power, P₂ = new static power I₂V₂ + new dynamic power 1/2C₂V₂²f₂ = 0.9P₁. For the Pentium 4 Prescott processor, P₂ = I₂V₂ + 1/2C₂V₂²f₂ = 0.9P₁. After that I₂(leakage current) = static power/voltage is = 10 W/1.25 V = 8 A (since the leakage current is constant), now have8 A × V₂ + 1/2 × 32 × 10⁻⁹ F × V₂² × 3.6 × 10⁹ Hz = 0.9 × 100
8V₂ + 57.6V₂² = 90. This leads to the quadratic equation
57.6V₂² + 8V₂ - 90 = 0. By the quadratic formula, V₂ =
V₂ = 1.18 V that is - 1.32 V .
When the new voltage is 1.18 V. The percentage will be reduction is (new voltage - old voltage)/new voltage × 100 % = (1.18 - 1.25)/1.18 × 100 % = -0.07/1.18 × 100 % = -5.9 % . Which is a 5.9 % reduction from 1.25 V For the Core i5 Ivy Bridge processor, P₂ = I₂V₂ + 1/2C₂V₂²f₂ = 0.9P₁ I₂(leakage current) = static power/voltage = 30 W/0.9 V = 33.33 A (since the leakage current is constant), we have33.33 A × V₂ + 1/2 × 29.05 × 10⁻⁹ F × V₂² × 3.4 × 10⁹ Hz = 0.9 × 70
33.33V₂ + 49.385V₂² = 63. This leads to the quadratic equation
49.385V₂² + 33.33V₂ - 63 = 0. By the quadratic formula, V₂ =
V₂ = 0.82 V that is - 2.30 V .
The new voltage is 0.82 V. The % reduction is (new voltage - old voltage)/new voltage × 100 % = (0.82 - 0.9)/0.82 × 100 % = -0.08/0.82 × 100 % = -9.8 % . Which is a 9.8 % reduction from 0.9 VLearn more about:
https://brainly.com/question/5326427
When we consider recruiting technology, what is the position called for the "person whose primary responsibility is to use the internet in the recruitment process"?
Answer:
Internet/Cyber Recruiter
Explanation:
The Cyber/Internet recruiter helps Recruiters and Hiring Managers manage and communicate during the entire recruiting process to fill open positions faster and more efficiently. The recruiting team, with its many administrative tasks and large volume of data, can benefit significantly from the application of Cyber/Internet recruitment. Cyber/Internet Recruiter manages the entire recruiting process more efficiently and streamlines the process along the way.
When replacing a system board in a laptop, which feature is a must?
Dual core CPU
Having the integrated peripherals in the same locations as the old system board
More RAM
Quad core CPU
Answer:
Having the integrated peripherals in the same locations as the old system board
Explanation:
System board is the printed circuit board that is used to connect the peripheral devices. It provides the slots and ports to connect the peripherals devices.
If there is a need to replace the system board of the laptop. You can change the system board. On new system board, all the peripherals that are installed on previous (old) system board should be placed on new system board. As the system requirements are same, only printed circuit board of the system is changed.
The new system board is replica of the previous board so, we can not change peripheral of the system boards.
What are two compatibility issues that may arise between computer systems while transferring presentations?
(Fill in the blank).
Different video files and _____ can cause compatibility issues to arise between computer systems
Answer:
The ability to work together without changing is compatibility.
First is, various software versions included or installed on the computers. The second is the various operating systems in the computers.
Different video files and operating system versions_ can cause compatibility issues to arise between computer systems.
It might trigger compatibility problems with a few of the existing software once you update or even upgrade your operating system. This issue is very rare with upgrades, but very popular with full version upgrades such as Windows 7 to Windows 10.
Answer:
Video card adapted.
Explanation:
In computer systems, compatibility is the ability for a file to run in the computer system safely and smoothly without errors. Videos have several formats like MP3 and many more, that can run on several digital platforms.
A computer system video card adapter is an essential device that provides the memory and interface to run graphic files like the videos. For a video or presentation to be transferred between computer, it format needs to be compatible with the video cards and screen resolution of the device.
________ is an IT system that uses natural language processing and machine learning to reveal insights from large amounts of data. It has transformed many industries including healthcare and customer service.
Answer:
"Watson" is the correct answer to this question.
Explanation:
Watson is an innovative method for research. It referred to as a supercomputer, which offers artificial intelligence to optimal "Questionnaire machine".
It uses in programming, that provides an interface, which enables the developers to cloud-based AI systems in their code. In this system several industries include medical and customer support have been converted.An individual who understands and uses a variety of symbols yet uses one symbol at a time to share a message needs more development of _______ to make requests/comments more precise by using expanded sequences of information.
Answer::
An individual who understands and uses a variety of symbols yet uses one symbol at a time to share a message needs more development of programming (learn as many programming languages as possible) to make requests/comments more precise by using expanded sequences of information.
I hope these helps, kindly give brainliest if it does
Cost Benefit Analyses (CBAs) cannot be calculated after controls have been functioning for a time, as observation over time prevents precision in evaluating the benefits of the safeguard and determining whether it is functioning as intended.
Select one:
True
False
Answer:
False
Explanation:
Cost benefit analyses (CBAs) or benefit costs analyses is an approach to quantifying the advantages and disadvantages of a business decision from a series of options. It quantifies the weakness and strength of an alternative that identifies options that would be beneficial, while reducing cost.
It is used to check for sound decision made by the organization, to determine and compare the costs of options and their individual benefit margin. The CBA can be calculated over time, as benefits are observed.
When you set up social connections, each generic icon in the contacts list and the People Pane will be replaced with the profile picture that the contact has set is his or her social network profile.
a) true
b) false
Answer:
True.
Explanation:
When you established social links, your social media site profile may eliminate almost any generic symbol throughout the list of contacts and the Individuals Pane with profile pic the contact may have placed. Thus, the Users Pane would be exchanged with profile image of the contact while establishing the social connections.
Answer:
frue
Explanation:
I have found the using the Outlook Social Connector for LinkedIn to be very ... will pull information from anyone out there with a public profile (which is ... With the Outlook Social Connector connected to LinkedIn, now you can see their picture. ... If you right-click the name of the contact you'll get a set of basic ...
How do Europe and North America address the challenges of jurisdiction when a computer crime involves both continents?
Answer:
A. Treaties
Explanation:
Based on the information provided within the question it can be said that in this type of situation where both countries are affected they usually enter into a treaty. This treaty represents an agreement between both countries on how they are going to handle the situation so that both countries get the justice that they want and therefore mutually benefit.
You are given two processors P1 and P2 that execute the same instruction set but have different architectures. The instructions that are executed by these processors can be divided into four classes –A, B, C and D. Processor P1 has a clock rate of 2.5 GHz and CPIs of 1, 2, 3 and 3 for each class of instruction. Processor P2 has a clock rate of 3 GHz and CPIs of:_______
The answer & explanation for this question is given in the attachment below.
The CPIs for Processor P2 are the same as those for Processor P1, which are 1, 2, 3, and 3 for classes A, B, C, and D, respectively.
We have,
To complete the information for Processor P2, we need to provide the CPIs for each class of instruction (A, B, C, and D) based on the given information.
We know that Processor P1 has the following CPIs:
Class A: CPI = 1
Class B: CPI = 2
Class C: CPI = 3
Class D: CPI = 3
Now, since Processor P2 executes the same instruction set, we can assume that it has the same CPIs for each class of instruction:
Class A: CPI = 1
Class B: CPI = 2
Class C: CPI = 3
Class D: CPI = 3
Thus,
The CPIs for Processor P2 are the same as those for Processor P1, which are 1, 2, 3, and 3 for classes A, B, C, and D, respectively.
Learn more about processors' performance here:
https://brainly.com/question/17193131
#SPJ3
What is the best summation of the main idea in Andrew Blum’s speech, "Discover the Physical Side of the Internet"? Question 10 options: a) Being online too much is bad for one’s health. b) More jobs are needed in the technology sector. c) We should be aware of the network and geographic presence behind our internet access rather than taking it for granted.
Answer:
c) We should be aware of the network and geographic presence behind our internet access rather than taking it for granted.
Explanation:
Andrew Blum’s speech is about the physical world and the size of the internet, he spent more time on the computer and cell phone than in the real world, and he had an issue with his internet, and the technician told him, squirrel has bittern your internet.
This can mean that the internet can be something complex and a huge thing, but can be damage for a squirrel, can be something simple.
When it comes to data storage, if a user wants striping and backup, which RAID will do both?
RAID 0
RAID 1
RAID 5
RAID 10
RAID 10 is the correct RAID level that provides both striping for performance and mirroring for data backup, meeting the user's requirements.
When it comes to data storage, if a user desires both striping for performance and backup for redundancy, the appropriate RAID level to choose would be RAID 10 (also known as RAID 1+0). Here's a brief explanation of why the other RAID levels do not meet both criteria:RAID 0: Offers striping but no redundancy for backup.RAID 1: Offers redundancy for backup but no striping.RAID 5: Offers striping and parity for redundancy, but the redundancy is not a full backup; it's designed to survive a single drive failure.RAID 10: Combines the benefits of RAID 0 and RAID 1, providing both striping and mirroring for backup.Therefore, RAID 10 is the optimal choice for users seeking both performance enhancements via striping and data protection through backup.A network technician is assisting the security team with some traffic captures. The security team wants to capture all traffic on a single subnet between the router and the core switch. To do so, the team must ensure there is only a single collision and broadcast domain between the router and the switch from which they will collect traffic. Which of the following should the technician install to BEST meet the goal?A. BridgeB. Crossover cableC. HubD. Media converter
Answer:
Option C i.e., Hub.
Explanation:
When network technician helps the support team with processing a few of the data. The support team needs to occupy both congestion between the router and the core switch over an individual subnet. To use it, the members must make sure there's only an individual collision as well as they broadcast IP address between both the router and the switch through which the congestion is received.
So, the technician installs the Hub to meet the following goal because It captures all the traffic on an individual subnet between them.
Most hardware troubleshooters don't use Internet search engines to locate potential problem solutions because they rarely know the exact model number of hardware devices with problems.
a) true
b) false
Answer:
False.
Explanation:
In the following statement is false because the internet requirement is necessary for the hardware troubleshooting to detect the the solution of the hidden issues because they never remember the number of hardware experiencing issues. So, it is the good reason to use search engine for the hardware troubleshooting.
A(n) ____________________ is hardware or software that blocks or allows transmission of information packets based on criteria such as port, IP address, and protocol.
Answer:
The answer is "Packet Filter(144-145)".
Explanation:
This technique is used in firewalls, which monitors access to the network, track data transmission packets, transfer or stop based on IP protocols and ports.
This approach is often used to test modulation packets. It also used to control performance and provides security. This mechanism also used in the IPv6." _____ is a measure of the amount of information that can travel from a user to the Internet in a given amount of time."
Answer:
The answer is Upload bandwidth
Explanation:
Bandwidth refers to the highest transfer rate of data on an internet connection or network.
Upload bandwidth is the amount of data that moves from a computer to the internet or a network within a given amount of time. Documents, music files, video files, software and so on can be uploaded to the internet or a network.
You are troubleshooting a network issue on a client computer and discover that the network card has an IP address of 169.254.196.200. What does this mean?
Answer:
Automatic Private IP Addressing (APIPA)
Explanation:
This usually means no static IP address is assigned to the computer. Therefore it cannot connect to the Dynamic Host Configuration Protocol (DHCP). It thus uses Automatic Private IP Addressing (APIPA)(which usually ranges from 169.254.0.1 to 169.254.255.254) to configure itself.
To resolve this, disconnect the computer from the network, assign or change the Static IP and reconnect. Alternately you can reset the Modem/Router.
An IP address of 169.254.196.200 indicates that the computer's network card has been assigned an Automatic Private IP Address (APIPA), which is used when it cannot reach a DHCP server.
When a computer is assigned an IP address of 169.254.196.200, it means that the network card has been assigned an Automatic Private IP Address (APIPA). APIPA is used by Microsoft Windows operating systems when the network card is set to obtain an IP address automatically, but the Dynamic Host Configuration Protocol (DHCP) server is not available or cannot be reached. In this situation, the operating system assigns an IP address in the 169.254.x.x range, enabling the computer to communicate with other devices on the same local network subnet, despite not being able to access the broader internet or external networks.
This situation is often a sign that there is a problem with the network's DHCP configuration or with the network itself. To resolve the issue, you would typically check the network connection, verify the DHCP server status, or review the network card settings on the impacted computer. The purpose of APIPA is to allow local network communication to continue until the DHCP issue can be resolved.
Write an expression that evaluates to true if the value of the int variable numberOfPrizes is divisible (with no remainder) by the int variable numberOfParticipants. Assume that numberOfParticipants is not zero.
Answer:
import java.util.Scanner;
public class TestClock {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("Enter number of prices");
int numberOfPrizes = in.nextInt();
System.out.println("Enter number of participants");
int numberOfParticipants = in.nextInt();
boolean isDivisible;
if(numberOfPrizes%numberOfParticipants==0){
isDivisible=true;
System.out.println("True");
}
else {
isDivisible=false;
System.out.println("False");
}
}
}
Explanation:
Using Java Language;
Prompt user to enter the number of prices and number of participants using the scanner classreceive and save values in the variables numberOfPrizes and numberOfParticipantsCreate a boolean variable (isDivisible) Using if statement and the modulo operator (%) which returns the remainder of division check if numberOfPrizes divieds evenly by numberOfParticipants.Information systems were described as ___________.
a. any technology used to leverage human capital
b. any technology (mechanical or electronic) used to supplement, extend, or replace human, manual labor
c. any complicated technology that requires expert use
d. the combination of people and information technology that create, collect, process, store, and distribute useful data
Answer:
Option d is the correct answer for the above question.
Explanation:
The information system is a concept that is used to produce or give the information as output after processing the data as input.It is a combination of technology, people, data and processor and structure which is used to process the data.The above-described definition is also stated from the option d. So option d is the best definition of the information system. So the Option d is the correct answer while the other is not because others will not describe the information system well.How do Responsive Display Ads use automation? a. Responsive Display Ads use a machine-learning model to create an advertiser's assets, using assets that have performed well in the past. b. Responsive Display Ads automate ad creation for most apps, but not desktop and mobile devices. c. Responsive Display Ads leverage powerful machine-learning models to generate reports customized to meet the specific requirements of each campaign. d. Responsive Display Ads use a machine-learning model to determine optimal assets for each ad slot using predictions based on an advertiser's performance history.
Answer:
Option D.
Explanation:
Responsive display ads replace adaptable advertising as that of the basic ad form for the Viewing Network. These could be used for both regular show campaigns and Mobile Viewing campaigns. Export the resources such as pictures, titles, icons, clips, and representations to develop a responsive display ad and Google will generate advertisements to be viewed on a Google Display Network.
So, Responsive Display Ads will be using a machine-learning model using forecasts performance-based history of an advertiser to assess optimum assets with each ad slot.
DMMs of average quality or better are "fused," meaning that one or more "fast-blow" fuses are included inside the DMM. If the ________ is too ______, the fuse will blow, protecting the meter.
Answer:
If the amperage is too high, the fuse will blow, protecting the meter.
Explanation:
Fuses are wires to prevent the destruction of electrical equipment. This destruction is caused by power surges
Digital Multimeters or DMMs are better fused, to avoid damage. This damage can occur if the amperage is too high and there is no fuse in the multimedia.
The fuse will get damaged first, therefore, disrupt the flow of current to the electronics.
Individuals and businesses have concerns about data security while using Internet-based applications. Which security risk refers to unsolicited bulk messages sent via the Internet? Refers to unsolicited bulk messages sent via the Internet.
Answer:
Spam
Explanation:
Spam is unsolicited bulk messages, that is, messages sent to multiple recipients who did not ask for them. The problems caused by spam are due to the combination of the unsolicited and bulk aspects; the quantity of unwanted messages swamps messaging systems and drowns out the messages that recipients do want. Spam has been a problem in many different media, and invariably arises whenever a medium allows people to send many messages without per-message charges.
What holds an optical drive in place for an installation on a laptop?
Screw on top
Screw underneath
Snap-in rails
Tray
Answer:
The Screw underneath the laptop hold it together
Explanation:
A Web application firewall protects Web servers from malicious traffic and blocks attempts to compromise the system. It prevents targeted attacks that include Denial of Service (DOS), Cross-Site Scripting (XSS), SQL injection, Cross-Site Request Forgery (CSRF), forceful browsing, cookie poisoning and invalid input. In which of the following attacks does the attacker gains access to a restricted page within a Web application by supplying a URL directly?
1, SQL injection
2, Cross-Site Request Forgery (CSRF)
3, Forceful browsing
4, Cross-Site Scripting (XSS)
Answer:
Option 3 i.e., Forceful browsing.
Explanation:
Whenever a firewall for a Web app defends Web servers from fraudulent activity and prevents efforts to manipulate the device. This avoids targeted attacks, including DoS, XSS, SQL injection, CSRF, intense browsing, cookie poisoning, and invalid feedback. So, the Forceful browsing attack is performed by the attackers.
____________ is a modulation technique that combines two different amplitudecombinations with eight different phase combinations modulation to send four bits persymbol.a. quadrature amplitude modulation b. time division multiplexingc. synchronous digital line control d. pulse code modulatione. baseband signaling
Answer:
The answer is A. Quadrature amplitude modulation
Explanation:
Quadrature amplitude modulation or QAM is a type of digital modulation used in telecommunications.
QAM is a technique that involves the combination of two amplitude-modulated (AM) signals within a single communication channel through the use of analog modulation or amplitude modulation techniques to optimize communication.
QAM results in more efficient bandwidth for better communication.
Answer:
quadrature amplitude modulation is a modulation technique that combines two different amplitudecombinations with eight different phase combinations modulation to send four bits persymbol.
Stephanie is a zoologist who loves the outdoors and often travels the world researching wildlife and serving as a consultant it zoos. Whatcha best describes the places she works and what she does there?
Answer:
Nature (at all) is the best place for her to work at. Researcher or Environmental activist or Biologist Professor or Zoo care/assistant. All of the mentioned works can be applied to her.
Explanation:
Stephanie is a zoologist who loves the outdoors and often travels the world researching wildlife and serving as a consultant in zoos the place she works is a zoo.
What is a zoo?A zoo is a place where all animals and other zoological organisms live there and are organized.
The best describes the places she works and what she does there is zoo as she works in nature found out the researches then later do complete research on the zoo.
Read more about the zoos:
https://brainly.com/question/26117916
#SPJ5
Roger wants to give semantic meaning to the contact information, which is at the bottom of the web page. To do this
he will use a footer element as a ______ of the contact information.
a. child
b. parent
c. sibling
d. direct child
Answer:
The answer is "Option b"
Explanation:
In the footer element, the roger uses parent element as the contact information because defined in critical analysis, in which critical thought is knowledge, in which it is widely applicable to life. It just implies that, logically and rationally, you evaluate details, its weaknesses, and strengths, and other options were wrong that can be described as follows:
Option a and Option d is not correct because that doesn't use this information section. In option c, It is also not correct because it is related to the child.Given a variable temps that refers to a list, all of whose elements refer to values of type float , representing temperature data, compute the average temperature and assign it to a variable named avg_temp . Besides temps and avg_temp , you may use two othervariables -- k and total .
My solution below didn't work. I wonder how to go about this problem.
temps = []
avg_temp = 0.0
total = 0.0
for k in range(temps):
total += k
avg_temp = total/len(temps)
Answer:
The problem of the question code is as follows:
Explanation:
There must be the items in the list: The above question code is in python language. The temps are a list type variable that is used to hold the collection of items or value. But in the above code, there is no item in the K list. So first remove this problem with the help of add the value on the list. There are two ways to add value to the list:- 1. Define the static list element by writing like "temps=[1.2,2.4,4.5]". and 2. Take input from the user and then add by "temps.append(item)".The syntax of the for loop: The syntax of the for loop is not right because it holds the "range" keyword which is written when we give the numeric value like, "for x in range(2)" or "for x in range(1,2)". So to correct for syntax the user needs to write "for k in temps:".If the user removes the above-defined error from the code then the above code will run correctly
The code segment you've provided contains a small mistake in the loop that iterates through the list temps. Instead of using range(temps), you should iterate directly over the elements in temps using for k in temps:
temps – a list with temperature data as floating-point numbers
total – to hold the sum of all temperatures
k – to refer to each temperature in the list during iteration
avg_temp – to store the computed average temperature
The correct code should look like this:
temps = [/* list of float values */]
avg_temp = 0.0
total = 0.0
for k in temps:
total += k
avg_temp = total / len(temps)
Here, the variable k will take on the value of each element in temps as we iterate through the list, adding each temperature to total. After the loop, we divide total by the number of elements in temps to get the average temperature. This will correctly compute avg_temp as long as temps is not empty.
. Which communications management practice includes specifying all of the communications systems and platforms that parties will use to share information?
Answer:
D. Standardized Communication Types
Explanation:
Based on the information provided within the question it can be said that the communication management practice being mentioned are called Standardized Communication Types. This practice refers to the three types of standard communication types that are used in order to effectively and efficiently communicate information between parties at a FEMA site. These standard communication types are Strategic, Tactical, and Support communications.
Determine the "M" value and number of data bits that can be represented by a single symbol using ASK where the possible amplitude values per symbol can be {0v, +1v, +2v, +3v, +4v, +5v, +6v, +7v}. a. M=2, N=1 bit per symbol b. M=4, N=2 bit per symbol c. M=6, N=3 bit per symbol d. M=8, N=3 bit per symbol
Answer:
d. M=8, N=3
Explanation:
The number of messages (M) that can be sent is 8. The eight messages are the listed amplitude values.
The number of bits per symbol (N) is log2(M) = log2(2^3) = 3.
M=8 messages can be sent, so N=3 bits per symbol.