Answer:
Workplace MIS Monitoring
Explanation:
The effective monitoring of employees within a company or organization has now become dynamic, thanks to improvements in Information Technology (IT). In previous time, monitoring employees was possible by the physical presence of a supervisor, who would from time to time go round to see that the employees are carrying out their respective duties, however, workplace monitoring is done in the following ways:
Mobile devices and Telephones: Activities carried out on mobile devices provided to the employees and telephones can be monitored by the employer. Conversations carried out are recorded for further analysis and to ensure that the employee only makes necessary calls.Computer: Similar to mobile devices and telephones, the employee's computer can be monitored through the help of software installed. The software can grant the employee rights to see activities carried out on the computer, such as memory usage, storage space, and even keyboard activities.Email: In cases when the email tool is provided by the employers, the email of the employees can be monitored accordingly.Geolocation: Harnessing the power of the GPS (Global Positioning System) technology, the location of the employees can be ascertained and monitored accordingly to ensure efficiency and productivity.Video: This is most common as employees install CCTV (Closed-Circuit Television) to record the activities that go on in the workplace to ensure productivity.Information systems were described as ___________.
a. any technology used to leverage human capital
b. any technology (mechanical or electronic) used to supplement, extend, or replace human, manual labor
c. any complicated technology that requires expert use
d. the combination of people and information technology that create, collect, process, store, and distribute useful data
Answer:
Option d is the correct answer for the above question.
Explanation:
The information system is a concept that is used to produce or give the information as output after processing the data as input.It is a combination of technology, people, data and processor and structure which is used to process the data.The above-described definition is also stated from the option d. So option d is the best definition of the information system. So the Option d is the correct answer while the other is not because others will not describe the information system well.____________ is a modulation technique that combines two different amplitudecombinations with eight different phase combinations modulation to send four bits persymbol.a. quadrature amplitude modulation b. time division multiplexingc. synchronous digital line control d. pulse code modulatione. baseband signaling
Answer:
The answer is A. Quadrature amplitude modulation
Explanation:
Quadrature amplitude modulation or QAM is a type of digital modulation used in telecommunications.
QAM is a technique that involves the combination of two amplitude-modulated (AM) signals within a single communication channel through the use of analog modulation or amplitude modulation techniques to optimize communication.
QAM results in more efficient bandwidth for better communication.
Answer:
quadrature amplitude modulation is a modulation technique that combines two different amplitudecombinations with eight different phase combinations modulation to send four bits persymbol.
____ twisted pair is the least quality twisted pair wire that should be used in a data/voice application.
Answer:
Category 5 (Cat 5) twisted pair is the least quality twisted pair wire that should be used.
Explanation:
The reason is as follows:
Category 1 twisted pair is not suitable for transmitting data but comes in handy for telephone communications. Hence, it should not be used in a data/voice application.Category 2 twisted pair is suitable for data transmission, however, it can only transmit at 4Mbps which is very slow. Hence, it should not be used in a data/voice application.Category 3 twisted pair can transmit data with speed reaching 10Mbps which is slow for voice/data communication.Category 4 twisted pair can transmit data with speed reaching 16Mbps and is used in token ring networks. It is slow for communicating in a voice/data application.Category 5 twisted pair is the least qualified to be used in a voice/data application because it can transmit data at speeds that reach 100Mbps.Hence, Cat 5 or Category 5 twisted pair is the least quality twisted pair that should be used in a data/voice application.
Final answer:
The correct answer is "Category 5 (Cat5)" The minimum quality twisted pair wire that should be used in data/voice applications is Category 5 (Cat5), though Cat5e and higher are preferred due to better performance.
Explanation:
The Category 5 (Cat5) twisted pair is the least quality twisted pair wire that should be used in a data/voice application. This standard is considered the minimum for supporting speeds up to 100 Mbps. Although it is an older category and has been superseded by Cat5e, Cat6, and higher categories that provide faster speeds and better crosstalk protection, Cat5 is still used in some installations where higher specifications are not necessary or cost is a limiting factor.
For most modern applications, however, Cat5e is the preferred minimum as it supports speeds up to 1 Gbps which is more suitable for current demands in network environments. Cat6 and above offer even better performance, supporting higher speeds and frequency ranges, which are important as demand for bandwidth continues to grow with the proliferation of connected devices and data-intensive applications.
. Which communications management practice includes specifying all of the communications systems and platforms that parties will use to share information?
Answer:
D. Standardized Communication Types
Explanation:
Based on the information provided within the question it can be said that the communication management practice being mentioned are called Standardized Communication Types. This practice refers to the three types of standard communication types that are used in order to effectively and efficiently communicate information between parties at a FEMA site. These standard communication types are Strategic, Tactical, and Support communications.
When it comes to data storage, if a user wants striping and backup, which RAID will do both?
RAID 0
RAID 1
RAID 5
RAID 10
RAID 10 is the correct RAID level that provides both striping for performance and mirroring for data backup, meeting the user's requirements.
When it comes to data storage, if a user desires both striping for performance and backup for redundancy, the appropriate RAID level to choose would be RAID 10 (also known as RAID 1+0). Here's a brief explanation of why the other RAID levels do not meet both criteria:RAID 0: Offers striping but no redundancy for backup.RAID 1: Offers redundancy for backup but no striping.RAID 5: Offers striping and parity for redundancy, but the redundancy is not a full backup; it's designed to survive a single drive failure.RAID 10: Combines the benefits of RAID 0 and RAID 1, providing both striping and mirroring for backup.Therefore, RAID 10 is the optimal choice for users seeking both performance enhancements via striping and data protection through backup.Roger wants to give semantic meaning to the contact information, which is at the bottom of the web page. To do this
he will use a footer element as a ______ of the contact information.
a. child
b. parent
c. sibling
d. direct child
Answer:
The answer is "Option b"
Explanation:
In the footer element, the roger uses parent element as the contact information because defined in critical analysis, in which critical thought is knowledge, in which it is widely applicable to life. It just implies that, logically and rationally, you evaluate details, its weaknesses, and strengths, and other options were wrong that can be described as follows:
Option a and Option d is not correct because that doesn't use this information section. In option c, It is also not correct because it is related to the child.How do Europe and North America address the challenges of jurisdiction when a computer crime involves both continents?
Answer:
A. Treaties
Explanation:
Based on the information provided within the question it can be said that in this type of situation where both countries are affected they usually enter into a treaty. This treaty represents an agreement between both countries on how they are going to handle the situation so that both countries get the justice that they want and therefore mutually benefit.
When the store-and-forward method of switching is in use, what part of the Ethernet frame is used to perform an error check?
Answer:
Source MAC address in the header
Explanation:
Store-and-Forward Switching is a Layer 2 switching method and it means that the LAN switch copies each complete frame into the switch memory buffers and computes a cyclic redundancy check (CRC) for errors. CRC is an error-checking method that uses a mathematical formula, based on the number of bits (1s) in the frame, to determine whether the received frame is errored. If a CRC error is found, the frame is discarded. If the frame is error free, the switch forwards the frame out the appropriate interface port
The Ethernet frame uses the FCS (Frame Check Sequence) for error checking when the store-and-forward switching method is in use.
When the store-and-forward method of switching is in use, the part of the Ethernet frame used to perform an error check is the FCS (Frame Check Sequence).This FCS, a field within the Ethernet frame, contains error-checking information that allows the receiving device to detect any transmission errors.By comparing this FCS value with the received data, the device can determine if the information in the frame is accurate or if errors have occurred.An individual who understands and uses a variety of symbols yet uses one symbol at a time to share a message needs more development of _______ to make requests/comments more precise by using expanded sequences of information.
Answer::
An individual who understands and uses a variety of symbols yet uses one symbol at a time to share a message needs more development of programming (learn as many programming languages as possible) to make requests/comments more precise by using expanded sequences of information.
I hope these helps, kindly give brainliest if it does
When replacing a system board in a laptop, which feature is a must?
Dual core CPU
Having the integrated peripherals in the same locations as the old system board
More RAM
Quad core CPU
Answer:
Having the integrated peripherals in the same locations as the old system board
Explanation:
System board is the printed circuit board that is used to connect the peripheral devices. It provides the slots and ports to connect the peripherals devices.
If there is a need to replace the system board of the laptop. You can change the system board. On new system board, all the peripherals that are installed on previous (old) system board should be placed on new system board. As the system requirements are same, only printed circuit board of the system is changed.
The new system board is replica of the previous board so, we can not change peripheral of the system boards.
DMMs of average quality or better are "fused," meaning that one or more "fast-blow" fuses are included inside the DMM. If the ________ is too ______, the fuse will blow, protecting the meter.
Answer:
If the amperage is too high, the fuse will blow, protecting the meter.
Explanation:
Fuses are wires to prevent the destruction of electrical equipment. This destruction is caused by power surges
Digital Multimeters or DMMs are better fused, to avoid damage. This damage can occur if the amperage is too high and there is no fuse in the multimedia.
The fuse will get damaged first, therefore, disrupt the flow of current to the electronics.
Cost Benefit Analyses (CBAs) cannot be calculated after controls have been functioning for a time, as observation over time prevents precision in evaluating the benefits of the safeguard and determining whether it is functioning as intended.
Select one:
True
False
Answer:
False
Explanation:
Cost benefit analyses (CBAs) or benefit costs analyses is an approach to quantifying the advantages and disadvantages of a business decision from a series of options. It quantifies the weakness and strength of an alternative that identifies options that would be beneficial, while reducing cost.
It is used to check for sound decision made by the organization, to determine and compare the costs of options and their individual benefit margin. The CBA can be calculated over time, as benefits are observed.
Determine the "M" value and number of data bits that can be represented by a single symbol using ASK where the possible amplitude values per symbol can be {0v, +1v, +2v, +3v, +4v, +5v, +6v, +7v}. a. M=2, N=1 bit per symbol b. M=4, N=2 bit per symbol c. M=6, N=3 bit per symbol d. M=8, N=3 bit per symbol
Answer:
d. M=8, N=3
Explanation:
The number of messages (M) that can be sent is 8. The eight messages are the listed amplitude values.
The number of bits per symbol (N) is log2(M) = log2(2^3) = 3.
M=8 messages can be sent, so N=3 bits per symbol.
How do Responsive Display Ads use automation? a. Responsive Display Ads use a machine-learning model to create an advertiser's assets, using assets that have performed well in the past. b. Responsive Display Ads automate ad creation for most apps, but not desktop and mobile devices. c. Responsive Display Ads leverage powerful machine-learning models to generate reports customized to meet the specific requirements of each campaign. d. Responsive Display Ads use a machine-learning model to determine optimal assets for each ad slot using predictions based on an advertiser's performance history.
Answer:
Option D.
Explanation:
Responsive display ads replace adaptable advertising as that of the basic ad form for the Viewing Network. These could be used for both regular show campaigns and Mobile Viewing campaigns. Export the resources such as pictures, titles, icons, clips, and representations to develop a responsive display ad and Google will generate advertisements to be viewed on a Google Display Network.
So, Responsive Display Ads will be using a machine-learning model using forecasts performance-based history of an advertiser to assess optimum assets with each ad slot.
What is occurring when an attacker manipulates commonplace actions that are routinely performed in a business?
Answer:
Vulnerable business processes, also called business process compromise (BPC), occurs when an attacker manipulates commonplace actions that are routinely performed.
Plan and projection adjustments may be made promptly, budget and closure cycles can be accelerated, and standards for financial reporting compliance can be ensured.
What attacker manipulates commonplace actions?Business process compromise (BPC), often known as vulnerable business processes, is when an attacker manipulates actions that are frequently taken.
Using the SAP Business Planning and Consolidation (SAP BPC) application's planning, budgeting, forecasting, and financial consolidation features.
An assailant in India, for instance, would ask New York to send money to Taiwan late on a Friday afternoon.
Therefore, Vulnerable business processes, also called business process compromise (BPC), occurs when an attacker manipulates commonplace actions that are routinely performed.
Learn more about attacker here:
https://brainly.com/question/24300486
#SPJ5
Given a variable temps that refers to a list, all of whose elements refer to values of type float , representing temperature data, compute the average temperature and assign it to a variable named avg_temp . Besides temps and avg_temp , you may use two othervariables -- k and total .
My solution below didn't work. I wonder how to go about this problem.
temps = []
avg_temp = 0.0
total = 0.0
for k in range(temps):
total += k
avg_temp = total/len(temps)
Answer:
The problem of the question code is as follows:
Explanation:
There must be the items in the list: The above question code is in python language. The temps are a list type variable that is used to hold the collection of items or value. But in the above code, there is no item in the K list. So first remove this problem with the help of add the value on the list. There are two ways to add value to the list:- 1. Define the static list element by writing like "temps=[1.2,2.4,4.5]". and 2. Take input from the user and then add by "temps.append(item)".The syntax of the for loop: The syntax of the for loop is not right because it holds the "range" keyword which is written when we give the numeric value like, "for x in range(2)" or "for x in range(1,2)". So to correct for syntax the user needs to write "for k in temps:".If the user removes the above-defined error from the code then the above code will run correctly
The code segment you've provided contains a small mistake in the loop that iterates through the list temps. Instead of using range(temps), you should iterate directly over the elements in temps using for k in temps:
temps – a list with temperature data as floating-point numbers
total – to hold the sum of all temperatures
k – to refer to each temperature in the list during iteration
avg_temp – to store the computed average temperature
The correct code should look like this:
temps = [/* list of float values */]
avg_temp = 0.0
total = 0.0
for k in temps:
total += k
avg_temp = total / len(temps)
Here, the variable k will take on the value of each element in temps as we iterate through the list, adding each temperature to total. After the loop, we divide total by the number of elements in temps to get the average temperature. This will correctly compute avg_temp as long as temps is not empty.
Write an expression that evaluates to true if the value of the int variable numberOfPrizes is divisible (with no remainder) by the int variable numberOfParticipants. Assume that numberOfParticipants is not zero.
Answer:
import java.util.Scanner;
public class TestClock {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("Enter number of prices");
int numberOfPrizes = in.nextInt();
System.out.println("Enter number of participants");
int numberOfParticipants = in.nextInt();
boolean isDivisible;
if(numberOfPrizes%numberOfParticipants==0){
isDivisible=true;
System.out.println("True");
}
else {
isDivisible=false;
System.out.println("False");
}
}
}
Explanation:
Using Java Language;
Prompt user to enter the number of prices and number of participants using the scanner classreceive and save values in the variables numberOfPrizes and numberOfParticipantsCreate a boolean variable (isDivisible) Using if statement and the modulo operator (%) which returns the remainder of division check if numberOfPrizes divieds evenly by numberOfParticipants.A network technician is assisting the security team with some traffic captures. The security team wants to capture all traffic on a single subnet between the router and the core switch. To do so, the team must ensure there is only a single collision and broadcast domain between the router and the switch from which they will collect traffic. Which of the following should the technician install to BEST meet the goal?A. BridgeB. Crossover cableC. HubD. Media converter
Answer:
Option C i.e., Hub.
Explanation:
When network technician helps the support team with processing a few of the data. The support team needs to occupy both congestion between the router and the core switch over an individual subnet. To use it, the members must make sure there's only an individual collision as well as they broadcast IP address between both the router and the switch through which the congestion is received.
So, the technician installs the Hub to meet the following goal because It captures all the traffic on an individual subnet between them.
When we consider recruiting technology, what is the position called for the "person whose primary responsibility is to use the internet in the recruitment process"?
Answer:
Internet/Cyber Recruiter
Explanation:
The Cyber/Internet recruiter helps Recruiters and Hiring Managers manage and communicate during the entire recruiting process to fill open positions faster and more efficiently. The recruiting team, with its many administrative tasks and large volume of data, can benefit significantly from the application of Cyber/Internet recruitment. Cyber/Internet Recruiter manages the entire recruiting process more efficiently and streamlines the process along the way.
________ is an IT system that uses natural language processing and machine learning to reveal insights from large amounts of data. It has transformed many industries including healthcare and customer service.
Answer:
"Watson" is the correct answer to this question.
Explanation:
Watson is an innovative method for research. It referred to as a supercomputer, which offers artificial intelligence to optimal "Questionnaire machine".
It uses in programming, that provides an interface, which enables the developers to cloud-based AI systems in their code. In this system several industries include medical and customer support have been converted.You are a network technician for a small corporate network. Today you moved an unused workstation to the IT Administration office, and now you need to connect the computer to the Ethernet local area network and the internet. In this lab, your task is to connect the workstation to the wired network as follows:_______
In the Networking Closet, use the appropriate twisted pair cable to make a connection between the patch panel and switch.
Use port IT Adm on the patch panel.
Use port 5 on the switch.
In the IT Administration office:_____
Connect the ITAdmin workstation to the local area network using the appropriate twisted pair cable.
Configure ITAdmin to obtain IP and DNS addresses automatically from the server on the local network.
Use the Network and Sharing Center to confirm that the workstation is properly connected to the local area network and the internet.
In the Networking Closet, use the appropriate twisted pair cable to make a connection between the patch panel and switch. Connect the cable to port IT Adm on the patch panel and port 5 on the switch. This will establish a physical connection between the network infrastructure and the switch port.
In the IT Administration office, connect the ITAdmin workstation to the local area network using the appropriate twisted pair cable. Plug one end of the cable into the network interface port of the workstation and the other end into an available network port in the office.
Configure the ITAdmin workstation to obtain IP and DNS addresses automatically from the server on the local network. This can be done by accessing the network settings of the workstation and selecting the option for automatic IP address and DNS configuration. This allows the workstation to receive the necessary network settings from the local network server.
Once the workstation is connected and the network settings are configured, use the Network and Sharing Center on the workstation to confirm that it is properly connected to the local area network and the internet. The Network and Sharing Center will display the network connection status, including the IP address, network type, and internet connectivity. It can also provide troubleshooting options if any issues are detected.
Therefore, by following these steps, you will successfully connect the ITAdmin workstation to the wired network, configure it to obtain network settings automatically, and confirm its connectivity to the local area network and the internet using the Network and Sharing Center.
For more details regarding Network and Sharing Center, visit:
https://brainly.com/question/32794361
#SPJ2
Final answer:
To connect a workstation to an Ethernet LAN and the internet in a corporate setting, use a twisted pair cable from the patch panel to the switch, and another from the workstation to the LAN. Configure the workstation to use DHCP for automatic IP and DNS configuration, and confirm the connection in the Network and Sharing Center.
Explanation:
To connect a workstation to the corporate Ethernet local area network (LAN) and the internet, begin in the networking closet. Use a twisted pair cable to connect port IT Adm on the patch panel to port 5 on the switch. This will enable network communication between the workstation and the broader network infrastructure.
In the IT Administration office, connect the ITAdmin workstation to the local area network using another twisted pair cable. To configure the workstation to obtain IP and DNS addresses automatically, navigate to the Network and Sharing Center and adjust the adapter settings to enable DHCP (Dynamic Host Configuration Protocol). This will allow the workstation to receive an IP address and DNS settings from a server on the network.
Finally, verify the connection by checking the status in the Network and Sharing Center. It should indicate that the workstation is connected to the network and has internet access. It's also important to ensure that the connection is secure, reliable and aligns with any organizational IT policies.
" _____ is a measure of the amount of information that can travel from a user to the Internet in a given amount of time."
Answer:
The answer is Upload bandwidth
Explanation:
Bandwidth refers to the highest transfer rate of data on an internet connection or network.
Upload bandwidth is the amount of data that moves from a computer to the internet or a network within a given amount of time. Documents, music files, video files, software and so on can be uploaded to the internet or a network.
What are two compatibility issues that may arise between computer systems while transferring presentations?
(Fill in the blank).
Different video files and _____ can cause compatibility issues to arise between computer systems
Answer:
The ability to work together without changing is compatibility.
First is, various software versions included or installed on the computers. The second is the various operating systems in the computers.
Different video files and operating system versions_ can cause compatibility issues to arise between computer systems.
It might trigger compatibility problems with a few of the existing software once you update or even upgrade your operating system. This issue is very rare with upgrades, but very popular with full version upgrades such as Windows 7 to Windows 10.
Answer:
Video card adapted.
Explanation:
In computer systems, compatibility is the ability for a file to run in the computer system safely and smoothly without errors. Videos have several formats like MP3 and many more, that can run on several digital platforms.
A computer system video card adapter is an essential device that provides the memory and interface to run graphic files like the videos. For a video or presentation to be transferred between computer, it format needs to be compatible with the video cards and screen resolution of the device.
You are troubleshooting a network issue on a client computer and discover that the network card has an IP address of 169.254.196.200. What does this mean?
Answer:
Automatic Private IP Addressing (APIPA)
Explanation:
This usually means no static IP address is assigned to the computer. Therefore it cannot connect to the Dynamic Host Configuration Protocol (DHCP). It thus uses Automatic Private IP Addressing (APIPA)(which usually ranges from 169.254.0.1 to 169.254.255.254) to configure itself.
To resolve this, disconnect the computer from the network, assign or change the Static IP and reconnect. Alternately you can reset the Modem/Router.
An IP address of 169.254.196.200 indicates that the computer's network card has been assigned an Automatic Private IP Address (APIPA), which is used when it cannot reach a DHCP server.
When a computer is assigned an IP address of 169.254.196.200, it means that the network card has been assigned an Automatic Private IP Address (APIPA). APIPA is used by Microsoft Windows operating systems when the network card is set to obtain an IP address automatically, but the Dynamic Host Configuration Protocol (DHCP) server is not available or cannot be reached. In this situation, the operating system assigns an IP address in the 169.254.x.x range, enabling the computer to communicate with other devices on the same local network subnet, despite not being able to access the broader internet or external networks.
This situation is often a sign that there is a problem with the network's DHCP configuration or with the network itself. To resolve the issue, you would typically check the network connection, verify the DHCP server status, or review the network card settings on the impacted computer. The purpose of APIPA is to allow local network communication to continue until the DHCP issue can be resolved.
Individuals and businesses have concerns about data security while using Internet-based applications. Which security risk refers to unsolicited bulk messages sent via the Internet? Refers to unsolicited bulk messages sent via the Internet.
Answer:
Spam
Explanation:
Spam is unsolicited bulk messages, that is, messages sent to multiple recipients who did not ask for them. The problems caused by spam are due to the combination of the unsolicited and bulk aspects; the quantity of unwanted messages swamps messaging systems and drowns out the messages that recipients do want. Spam has been a problem in many different media, and invariably arises whenever a medium allows people to send many messages without per-message charges.
You are given two processors P1 and P2 that execute the same instruction set but have different architectures. The instructions that are executed by these processors can be divided into four classes –A, B, C and D. Processor P1 has a clock rate of 2.5 GHz and CPIs of 1, 2, 3 and 3 for each class of instruction. Processor P2 has a clock rate of 3 GHz and CPIs of:_______
The answer & explanation for this question is given in the attachment below.
The CPIs for Processor P2 are the same as those for Processor P1, which are 1, 2, 3, and 3 for classes A, B, C, and D, respectively.
We have,
To complete the information for Processor P2, we need to provide the CPIs for each class of instruction (A, B, C, and D) based on the given information.
We know that Processor P1 has the following CPIs:
Class A: CPI = 1
Class B: CPI = 2
Class C: CPI = 3
Class D: CPI = 3
Now, since Processor P2 executes the same instruction set, we can assume that it has the same CPIs for each class of instruction:
Class A: CPI = 1
Class B: CPI = 2
Class C: CPI = 3
Class D: CPI = 3
Thus,
The CPIs for Processor P2 are the same as those for Processor P1, which are 1, 2, 3, and 3 for classes A, B, C, and D, respectively.
Learn more about processors' performance here:
https://brainly.com/question/17193131
#SPJ3
A(n) ____________________ is hardware or software that blocks or allows transmission of information packets based on criteria such as port, IP address, and protocol.
Answer:
The answer is "Packet Filter(144-145)".
Explanation:
This technique is used in firewalls, which monitors access to the network, track data transmission packets, transfer or stop based on IP protocols and ports.
This approach is often used to test modulation packets. It also used to control performance and provides security. This mechanism also used in the IPv6.Stephanie is a zoologist who loves the outdoors and often travels the world researching wildlife and serving as a consultant it zoos. Whatcha best describes the places she works and what she does there?
Answer:
Nature (at all) is the best place for her to work at. Researcher or Environmental activist or Biologist Professor or Zoo care/assistant. All of the mentioned works can be applied to her.
Explanation:
Stephanie is a zoologist who loves the outdoors and often travels the world researching wildlife and serving as a consultant in zoos the place she works is a zoo.
What is a zoo?A zoo is a place where all animals and other zoological organisms live there and are organized.
The best describes the places she works and what she does there is zoo as she works in nature found out the researches then later do complete research on the zoo.
Read more about the zoos:
https://brainly.com/question/26117916
#SPJ5
What holds an optical drive in place for an installation on a laptop?
Screw on top
Screw underneath
Snap-in rails
Tray
Answer:
The Screw underneath the laptop hold it together
Explanation:
What is the best summation of the main idea in Andrew Blum’s speech, "Discover the Physical Side of the Internet"? Question 10 options: a) Being online too much is bad for one’s health. b) More jobs are needed in the technology sector. c) We should be aware of the network and geographic presence behind our internet access rather than taking it for granted.
Answer:
c) We should be aware of the network and geographic presence behind our internet access rather than taking it for granted.
Explanation:
Andrew Blum’s speech is about the physical world and the size of the internet, he spent more time on the computer and cell phone than in the real world, and he had an issue with his internet, and the technician told him, squirrel has bittern your internet.
This can mean that the internet can be something complex and a huge thing, but can be damage for a squirrel, can be something simple.