When a bullet is retrieved, how is it marked for identification purposes? What should be avoided?

Answer: The molar composition of nitrogen gas is 0.6 and that of oxygen gas is 0.4

Explanation:

To calculate the molarity of solution, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (in L)}}[/tex]

Given mass of nitrogen gas = 51.3 mg = 0.0513 g     (Conversion factor:  1 g = 1000 mg)

Molar mass of nitrogen gas = 28 g/mol

Volume of solution = 2 L

Putting values in above equation, we get:

[tex]\text{Molarity of nitrogen gas}=\frac{0.0513g}{28g/mol\times 2L}\\\\\text{Molarity of nitrogen gas}=9.16\times 10^{-4}mol/L[/tex]

To calculate the partial pressure, we use the equation given by Henry's law, which is:

[tex]C_{N_2}=K_H\times p_{N_2}[/tex]

where,

[tex]K_H[/tex] = Henry's constant = [tex]6.1\times 10^{-4}mol/L.atm[/tex]

[tex]C_{N_2}[/tex] = molar solubility of nitrogen gas = [tex]9.16\times 10^{-4}mol/L[/tex]

Putting values in above equation, we get:

[tex]9.16\times 10^{-4}mol/L=6.1\times 10^{-4}mol/L.atm\times p_{N_2}\\\\p_{N_2}=\frac{9.16\times 10^{-4}mol/L}{6.1\times 10^{-4}mol/L.atm}=1.50atm[/tex]

We are given:

Total pressure of the mixture = 2.50 atm

Partial pressure of oxygen gas = 2.50 - 1.50 = 1.00 atm

To calculate the mole fraction of a substance at 25°C, we use the equation given by Raoult's law, which is:

[tex]p_{A}=p_T\times \chi_{A}[/tex]       ......(1)

where,

[tex]p_A[/tex] = partial pressure

[tex]p_T[/tex] = total pressure

[tex]\chi_A[/tex] = mole fraction

We are given:

[tex]p_{N_2}=1.50atm\\p_T=2.50atm[/tex]

Putting values in equation 1, we get:

[tex]1.50atm=2.50\times \chi_{N_2}\\\\\chi_{N_2}=\frac{1.50}{2.50}=0.6[/tex]

We are given:

[tex]p_{O_2}=1.00atm\\p_T=2.50atm[/tex]

Putting values in equation 1, we get:

[tex]1.00atm=2.50\times \chi_{O_2}\\\\\chi_{O_2}=\frac{1.00}{2.50}=0.4[/tex]

Hence, the molar composition of nitrogen gas is 0.6 and that of oxygen gas is 0.4

The mole fraction of nitrogen and oxygen is 0.6 and 0.4 respectively.

Data Given;

The law states that the mass of a dissolved gas in a given volume of solvent at equilibrium will be proportional to the partial pressure of the gas.

Mathematically;

C = KP

The number of moles Nitrogen dissolved is

[tex]n = mass/ molar mass\\ n = 0.0513/28\\ n = 0.00183127 moles[/tex]

The concentration of Nitrogen in water is

[tex]\frac{0.00183127}{2} *1 = 0.0009156M[/tex]

Applying Henry's law,

[tex]0.0009156 = 6.1*10^-^4 * P\\ P = 1.5atm[/tex]

The partial pressure of nitrogen in the mixture is 1.5atm

The total pressure of the gas is 2.50atm

Partial Pressure of oxygen = total pressure - partial pressure of nitrogen

partial pressure of oxygen = 2.50 - 1.50 = 1

The pressure fraction of the gas is the ratio between the partial pressure to the total pressure

pressure fraction of nitrogen = 1.5/2.5 = 0.6

pressure fraction of oxygen = 1/2.5 = 0.4

But partial pressure is equal to molar fraction.

This makes the mole fraction of nitrogen equals 0.6 and mole fraction of oxygen equals 0.4.

Learn more about Henry's law here;

https://brainly.com/question/12823901

Answer:

a. Molecular formula of phenylalanine → C₉H₁₁NO₂

b. 234.2 g of C₉H₁₁NO₂

Explanation:

Let's think the reaction:

C₁₄H₁₈N₂O₅  +  2H₂O →  CH₃OH  +  ‎C₉H₁₁NO₂ + C₄H₇NO₄

In order to work with this reaction, we assume that water is on excess.

Let's determine the moles of aspartame → molar mass = 294 g/mol

Moles = mass / molar mass → 378 g / 294 g/mol = 1.28 moles

As ratio is 1:1, 1 mol of aspartame can produce 1 mol of phenylalanine; therefore 1.28 moles of aspartame must produce 1.28 moles of phenylalanine.

Let's convert the moles to mass → molar mass C₉H₁₁NO₂ = 183 g/mol

Moles . molar mass = Mass → 1.28 mol . 183 g/mol = 234.2 g

A. The molecular formula of phenylalanine is C₉H₁₁NO₂

B. The mass of phenylalanine, C₉H₁₁NO₂ produced from 378 g of aspartame is 212.14 g

A. Determination of the molecular formula of phenylalanine.

To obtain the molecular formula of phenylalanine, we shall write the balanced equation. This is given below

C₁₄H₁₈N₂O₅ + 2H₂O → C₄H₇NO₄ + CH₃OH + C₉H₁₁NO₂

Thus, the molecular formula of phenylalanine is C₉H₁₁NO₂

B. Determination of the mass of phenylalanine, C₉H₁₁NO₂ produced from 378 g of aspartame

C₁₄H₁₈N₂O₅ + 2H₂O → C₄H₇NO₄ + CH₃OH + C₉H₁₁NO₂

Molar mass of C₁₄H₁₈N₂O₅ = (14×12) + (18×1) + (14×2) + (16×5) = 294 g/mol

Mass of C₁₄H₁₈N₂O₅ from the balanced equation = 1 × 294 = 294 g

Molar mass of C₉H₁₁NO₂ = (9×12) + (11×1) + 14 + (16×2) = 165 g/mol

Mass of C₉H₁₁NO₂ from the balanced equation = 1 × 165 = 165 g

From the balanced equation above,

294 g of C₁₄H₁₈N₂O₅ reacted to produce 165 g of C₉H₁₁NO₂

Therefore,

378 g of C₁₄H₁₈N₂O₅ will react to produce = (378 × 165) / 294 = 212.14 g of C₉H₁₁NO₂

Thus, 212.14 g of C₉H₁₁NO₂ were obtained from the reaction.

Learn more: https://brainly.com/question/25748313

Answer:

The metallic bond of the sodium metal is weaker than the ionic bond of the sodium chloride

Explanation:

The metallic bond of the sodium metal is weaker than the ionic bond of the sodium chloride. This is seen in the fact that the melting point of the sodium metal which is 97.8°C is lower than the melting point of the sodium chloride which is 801°C. This shows that the inter-atomic bonds of the sodium metal are weaker than that of the inter-ionic bonds of the sodium chloride which will require higher energy to break which is shown by its high melting point of 801°C. The melting point of the sodium metal of 97.8 °C which is lower requires less energy to break its bonds. This is shown by its lower melting point.

Average C-H bond energy: Ethane = 764.93 kJ/mol, Ethene = 627.79 kJ/mol, Ethyne = 528.26 kJ/mol.

To find the average C-H bond energy in ethane (C₂H₆), ethene (C₂H₄), and ethyne (C₂H₂), we can use Hess's law and the given reactions along with the average C-H bond energy in methane (CH₄), which is 415 kJ/mol.

1. **Calculate the average C-H bond energy in ethane (C₂H₆):**

  Given reaction:

[tex]\[C2H6 (g) + H2 (g) \rightarrow 2CH4 (g) \quad \Delta H_{\text{rxn}} = -65.07 \, \text{kJ/mol}\][/tex]

  This reaction breaks one C-C bond and adds two C-H bonds.

  Change in bond energy = Total energy of bonds broken - Total energy of bonds formed

[tex]\[= 1 \times (\text{C-C bond energy}) - 2 \times (\text{C-H bond energy})\][/tex]

  From the given reaction, the change in bond energy is -65.07 kJ/mol.

  Substituting the known values:

 [tex]\[-65.07 \, \text{kJ/mol} = 1 \times (\text{C-C bond energy}) - 2 \times (415 \, \text{kJ/mol})\][/tex]

  Solving for the C-C bond energy:

[tex]\[\text{C-C bond energy} = 2 \times 415 - 65.07 \, \text{kJ/mol} = 764.93 \, \text{kJ/mol}\][/tex]

2. **Calculate the average C-H bond energy in ethene (C₂H₄):**

  Given reaction:

[tex]\[C2H4 (g) + H2 (g) \rightarrow 2CH4 (g) \quad \Delta H = -202.21 \, \text{kJ/mol}\][/tex]

  This reaction breaks one C=C bond and adds two C-H bonds.

  Change in bond energy = Total energy of bonds broken - Total energy of bonds formed

[tex]\[= 1 \times (\text{C=C bond energy}) - 2 \times (\text{C-H bond energy})\][/tex]

  From the given reaction, the change in bond energy is -202.21 kJ/mol.

  Substituting the known values:

[tex]\[-202.21 \, \text{kJ/mol} = 1 \times (\text{C=C bond energy}) - 2 \times (415 \, \text{kJ/mol})\][/tex]

  Solving for the C=C bond energy:

 [tex]\[\text{C=C bond energy} = 2 \times 415 - 202.21 \, \text{kJ/mol} = 627.79 \, \text{kJ/mol}\][/tex]

3. **Calculate the average C-H bond energy in ethyne (C₂H₂):**

  Given reaction:

  [tex]\[C2H2 (g) + 3H2 (g) \rightarrow 2CH4 (g) \quad \Delta H = -376.74 \, \text{kJ/mol}\][/tex]

  This reaction breaks one C≡C bond and adds four C-H bonds.

  Change in bond energy = Total energy of bonds broken - Total energy of bonds formed

[tex]\[= 1 \times (\text{C≡C bond energy}) - 4 \times (\text{C-H bond energy})\][/tex]

  From the given reaction, the change in bond energy is -376.74 kJ/mol.

  Substituting the known values:

[tex]\[-376.74 \, \text{kJ/mol} = 1 \times (\text{C≡C bond energy}) - 4 \times (415 \, \text{kJ/mol})\][/tex]

  Solving for the C≡C bond energy:

 [tex]\[\text{C = C bond energy} = 4 \times 415 - 376.74 \, \text{kJ/mol} = 528.26 \, \text{kJ/mol}\][/tex]

So, the average C-H bond energy in ethane [tex](C2H6) is \(764.93 \, \text{kJ/mol}\), in ethene (C2H4) is \(627.79 \, \text{kJ/mol}\), and in ethyne (C2H2) is \(528.26 \, \text{kJ/mol}\).[/tex]

The volume change during Iron's BCC to FCC transformation is computed via cubing the atomic radii and applying them to a percent change formula. The increasing radius hints at a likely volume increase, however, the exact percent change requires numerical calculation.

To answer your question on whether the volume increases or decreases during the allotropic transformation of Iron (Fe) from a BCC phase (with atomic radius rBCC = 0.12584 nm) to an FCC phase (rFCC = 0.12894 nm), we need to recognize that the volume of an atom in a crystal structure can be determined by cubing its atomic radius, and the volume change can be obtained by taking the difference between the initial and final volumes.

The initial volume (of the BCC phase) is (0.12584 nm)³, while the final volume (of the FCC phase) is (0.12894 nm)³. The percent volume change can then be computed by [(final volume - initial volume)/initial volume] x 100%.

If this calculation yields a positive value, this would mean the volume increases; if the result is a negative value, the volume decreases. While it's evident that the radius increases during this transformation, due to the cubic relationship between radius and volume, it's likely that the volume also increases, although the actual percent volume change would require numerical computation.

https://brainly.com/question/33518175

#SPJ12

Final answer:

The percent volume change during the allotropic transformation of iron from BCC to FCC can be calculated using the given atomic radii and results in an increase in volume.

Explanation:

To compute the percent volume change associated with the allotropic transformation of iron (Fe) from a BCC (body-centered cubic) structure to an FCC (face-centered cubic) structure at 912°C, we can use their respective atomic radii and the equation for the volume of a sphere, V = (4/3)πr3. Given the atomic radii for BCC as rBCC = 0.12584 nm and for FCC as rFCC = 0.12894 nm, the respective volumes can be calculated.

After obtaining the volumes, we calculate the percent volume change with the formula: Volume Change (%) = (VFCC - VBCC)/VBCC x 100%. Using the given radii, we find that the volume of FCC iron is larger than BCC iron, indicating that the volume increases during the transformation. The actual numerical percent volume change can be computed using the given radii values and the volume equation stated above.

Final answer:

The water bath, filled to within 2.57 inches of the top, contains approximately 1014.48 liters of water. This calculation involves converting inches to meters, calculating the volume in cubic meters, and then converting that volume to liters.

Explanation:

To calculate the volume of water in the water bath, we need to take into account the dimensions given and the fact that it is filled to within 2.57 inches from the top. First, we need to convert the depth from which it's filled into meters, as the other dimensions are given in meters.

2.57 inches = 0.06533 meters (since 1 inch = 0.0254 meters)

The actual depth filled with water will be:

0.740 m (total depth) - 0.06533 m = 0.67467 m

Next, we multiply the length, the width, and the newly calculated depth to get the volume in cubic meters:

Volume = 1.85 m × 0.810 m × 0.67467 m = 1.01448 cubic meters

To convert the volume from cubic meters to liters, we use the conversion factor 1 cubic meter = 1000 liters:

Volume = 1.01448 m3 × 1000 L/m3 = 1014.48 liters

Therefore, there are approximately 1014.48 liters of water in the water bath.

Answer:

Unstable Nuclei. ... Too many neutrons or protons upset this balance disrupting the binding energy from the strong nuclear forces making the nucleus unstable. An unstable nucleus tries to achieve a balanced state by given off a neutron or proton and this is done via radioactive decay.

Explanation:

Answer:

Option a.

0.01 mol of CaCl₂ will have the greatest effect on the colligative properties, because it has the biggest i

Explanation:

To determine which of the solute is going to have a greatest effect on colligative properties we have to consider the Van't Hoff factor (i)

These are the colligative properties:

ΔP = P° . Xm . i  →  Lowering vapor pressure

ΔT = Kb . m . i  → Boiling point elevation

ΔT = Kf . m . i  →  Freezing point depression

π = M . R . T  →  Osmotic pressure

Van't Hoff factor are the numbers of ions dissolved in the solution. For nonelectrolytes, the i values 1.

CaCl₂ and KNO₃ are two ionic solutes. They dissociate as this:

CaCl₂  → Ca²⁺ + 2Cl⁻

We have 1 mol of Ca²⁺ and 2 chlorides, so 3 moles of ions → i = 3

KNO₃ → K⁺ + NO₃⁻

We have 1 mol of K⁺ and 1 mol of nitrate, so 2 moles of ions → i = 2

Option a, is the best.

0.01 mol of CaCl2 has the greatest effect on colligative properties because it dissociates into three ions per formula unit, resulting in a higher number of dissolved particles compared to the same amount of KNO3, which dissociates into two ions, and CO(NH2)2, which does not dissociate.

The solute that has the greatest effect on the colligative properties for a given mass of pure water from the options provided would be 0.01 mol of CaCl2 (an electrolyte). This is because the colligative properties such as freezing point depression, boiling point elevation, and osmotic pressure depend on the total number of dissolved particles in solution.

When CaCl2 dissolves in water, it dissociates into three ions: one Ca2+ ion and two Cl- ions. This means for every mole of CaCl2 we get three moles of particles. In contrast, 0.01 mol of KNO3, another electrolyte, produces two ions per formula unit, and 0.01 mol of CO(NH2)2 (urea, a nonelectrolyte) does not dissociate into ions when dissolved, hence producing only one mole of particles per mole of solute.

Therefore, for the given mass of 0.01 mol, CaCl2 produces the greatest number of particles and therefore has the greatest effect on colligative properties when compared to KNO3 and urea.

Equation of reaction

NaHCO3 +  HCl  --------->  NaCl  +  H2O  +  CO2(g)

1)The mass(actual yield) of CO2 can be gotten by isolating it from other products and getting its mass.

Assume 1.0g of CO2 was gotten as a product of the experiment

2) For the theoretical yield

The mass of NaHCO3 was not stated, but for the purpose of this solution, I would assume 2g of NaHCO3 was used for the experiment. You can substitute any parameter by following the steps I follow

Number of mole of NaHCO3 = Mass of NaHCO3/ Molar Mass of NaHCO3

Number of mole of NaHCO3 = 2/84.01 = 0.0238 moles

1 mole of NaHCO3 yielded 1 mole of CO2

0.0238 moles of NaHCO3 will yield 0.0238 moles of CO2

Mass of CO2 = Number of moles * Molar Mass

Mass of CO2 = 0.0238 * 44 = 1.0472g

Theoretical yield of CO2 = 1.0472 grams

3) Percentage yield of CO2 = Actual yield/Theoretical yield *100%

Percentage yield of CO2 = 1.0/1.0472 *100

Percentage yield of CO2 = 95.49%

Answer:

1) The mass of [tex]CO_{2}[/tex] produced is 1.29g

2) The theoretical yield for [tex]CO_{2}[/tex] is 1.311g

3) The percent yield is 98.4%

Explanation:

Step 1: in an experiment let's allow sodium bicarbonate (baking soda) to react with hydrochloric acid HCl to obtain high yield [tex]CO_{2}[/tex].

[tex]NaHCO_{3}+HCl[/tex] ⇒ [tex]NaCl + H_{2} O + CO_{2}[/tex]

from the balanced equation it can be seen that 1 mole of [tex]NaHCO_{3[/tex] produces 1 mole of [tex]CO_{2}[/tex].

Step 2: Let assume 2.5g of [tex]NaHCO_{3[/tex] were used

mole of [tex]NaHCO_{3[/tex] = 2.5g/molecular mass of [tex]NaHCO_{3[/tex]

molecular mass of[tex]NaHCO_{3[/tex] = 23+1+12+(16×2) = 84g/mol

converting mass of [tex]NaHCO_{3[/tex] into mole we have:

           [tex]\frac{2.5g}{84gmol^{-1} }[/tex]= 0.0298 moles

Step 3: since [tex]NaHCO_{3[/tex] : [tex]CO_{2}[/tex] mole is ratio 1:1, then 0.0298 mole of [tex]NaHCO_{3[/tex] will produce 0.0298 mole of [tex]CO_{2}[/tex]

The mass of this amount of [tex]CO_{2}[/tex] = 0.0298 × molecular mass of [tex]CO_{2}[/tex]

                = 0.0298 mol × ( 12+(16×2))g/mol = 1.3111g of [tex]CO_{2}[/tex]

 therefore; the theoretical yield expected is 1.311g

Step 4: Let assume for the experiment that we obtained 1.29g  of [tex]CO_{2}[/tex] as the actual yield

then, percent yield for [tex]CO_{2}[/tex] = [tex]\frac{Actual yield obtained}{theoretical yield that should have been obtained}[/tex] × 100%

                                             = 1.2g/1.311g × 100% =98.4%

All people are tax people

-Turbo tax

Answer:

b.open flame because it is fundamental end of the alcohol mixes in with the flame then it will become a bigger fire

The safest practice is to never use flammable materials like alcohol near an open flame as it can easily ignite and cause a fire.

Flammable materials such as alcohol should never be dispensed or used near an open flame (option B). These substances are highly reactive and can easily ignite, potentially causing a fire. It's crucial for safety purposes to avoid using flammable materials around direct sources of heat or open flames. This rule is applicable not only in chemistry laboratories, but also in any other scenario where flammable substances are present.

https://brainly.com/question/26230725

#SPJ6

Answer:62.66°C or 235.66K

Explanation:Q=McpT, the energy was given in calories so you first convert to Joules by multiplying the value in calories by 4.184J.

17*4.184=71.128kJ.

71.128kJ=mcpT

71.128kJ=245*4.187*(T-Tm)

Tm is the final temperature of the mixture. The T is the temperature given which should be converted to Kelvin by adding 273...T=32+273=305K.

71128J=245*4.187*(305-Tm)

71128=312873.575-1025.815Tm

1025.815Tm=312873.575-71128

1025.815Tm=241745.58

Tm=241745.58/1025.815

Tm=235.66K

Answer:

The corrext answer is E. make; break

Explanation:

In living organisms, the metabolism is either anabolic or catabolic where anabolic metabolism is energy consuming and catabolic metabolism is eneegy releasesing. It should however be noted that anabolic reaction builds or biosynthesize new mollecular structures while catabolic reaction breaks down complex structure bonds into simple structures

The braking down of bonds in catabolic reations realeses energy to sustain the anabolic rection process for the formation of new bonds

Anabolic reactions create or 'make' new bonds while forming complex structures, requiring energy. Catabolic reactions involve 'break' down bonds to create simpler structures, often releasing energy.

The correct answer is E. Anabolic reactions are those that 'make' or form new bonds, they involve the joining of smaller molecules to form larger, more complex ones. This process often requires energy. Conversely, catabolic reactions are those that 'break' or degrade bonds, they involve the breaking down of larger molecules into smaller, simpler ones. This process often releases energy.

https://brainly.com/question/31913853

#SPJ3

Answer:FeS

Explanation:

Mass of sulphur=5.95-3.78=2.17g

Fe S

3.78/56. 2.17/32

0.0675/0.0675. 0.0678/0.0675

1:1

Empirical formula=Fe1S1=FeS

An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. The empirical formula is FeS.

The formula of a material expressed with the smallest integer subscript is referred to as an empirical formula for a compound. The empirical formula provides details regarding the ratio of atom counts in the molecule. A compound's empirical formula is directly related to its % content.

Mass of sulphur = 5.95 - 3.78 = 2.17g

Moles of Fe and S are:

Fe = 3.78/56

n = 0.0675

S = 2.17/32

n = 0.0678

Dividing with the smallest number:

0.0675/0.0675 = 1

0.0678/0.0675 = 11

The ratio is:

1:1

Empirical formula = FeS

To know more about empirical formulas, visit;

https://brainly.com/question/29506551

#SPJ3

Answer:

C2H4Cl2

Explanation:

Firstly, we know that the compound contains only three elements. These are carbon, hydrogen and oxygen. We have the percentage compositions of carbon and hydrogen, thus we need the one for chlorine. To get the one for chlorine, we simply subtract that of carbon and hydrogen from a total of 100%.

Hence percentage composition of chlorine = 100 - 24.27 - 4.07 = 71.66%

Now, we divide the percentage compositions by the atomic masses. The atomic masses of carbon, hydrogen and chlorine are 12, 35.5 and 1 respectively. We go on to the divisions as follows.

C = 24.27/12 = 2.0225

H = 4.07/1 = 4.07

Cl = 71.66/35.5 = 2.02

We then go on to divide each by the smallest which is 2.02

C = 2.0225/2.02 = 1

H = 4.07/2.02 = 2

Cl = 2.02/2.02 = 1

Hence the empirical formula is CH2Cl

Now, since the molecular mass is 98.95, we need to calculate the molecular formula

Hence, [CH2Cl]n = 98.95

[12 + 2(1) + 35.5]n = 98.95

[12 + 2 + 35.5]n = 98.95

49.5n = 98.95

n = 98.95/49.5 = 2

The molecular formula is thus [CH2Cl]2 = C2H4Cl2

The gas laws involve Charles' Law, showing a direct proportionality between volume and temperature for a gas. The new volume of the gas after being cooled from 20°C to -60°C (converted to Kelvin), which is under constant pressure, is calculated to be approximately 30.6 mL.

This question involves the concept of the gas laws in Physics, specifically, Charles' Law which states that the volume of a given mass of an ideal gas is directly proportional to its temperature on an absolute scale if pressure and the amount of gas remain constant.

First, let's convert the Celsius temperatures to Kelvin by adding 273.15. This gives us initial temperature T1 = 20°C + 273.15 = 293.15 K and final temperature T2 = -60°C + 273.15 = 213.15 K. The initial volume V1 is 42 mL.

According to Charles' Law, V1/T1 = V2/T2. Substituting the given values, we find the new volume V2 = V1*(T2/T1) = 42 mL * (213.15 K / 293.15 K) = 30.6 mL.

https://brainly.com/question/16927784

#SPJ12

Answer: that one

Explanation:

Answer:

The following must be true for diffusion of a solute to occur across a partition that separates two compartments

The partition is semi permeable

There is  concentration gradient across the partition

The process is known as Osmosis

Explanation:

Diffusion is the migration of particles of a substance, liquid or gas, from a region of high concentration to a region of lower concentration and it only occurs where there is a concentration gradient for example spraying a perfume at a corner of a room, the spray sent spreads across the room as there is a concentration gradient

Osmosis is the movement or diffusion of solvent molecules across a semi permeable membrane from a region of low solute concentration to a region of high solute concentration to create a balanced concentration of solute on both sides of the compartment.

Diffusion requires a concentration gradient and a membrane permeable to the solute; in osmosis, water diffuses to balance solute concentrations.

For the diffusion of a solute to occur across a partition that separates two compartments, there must be a concentration gradient present, where the solute molecules move from an area of higher concentration to an area of lower concentration. Additionally, permeability of the membrane to the solute is crucial, as only materials capable of passing through will diffuse.

In certain situations, such as osmosis, water will move across the membrane to balance the concentration gradient of solutes, when the solutes themselves cannot pass through the membrane. In living systems, osmosis is a dynamic and continuous process that maintains the balance of fluids.

Answer: 0.75 moles of Phosphorus and 4.5 moles of Hydrogen are produced respectively from 3 moles of Phosporus.

Explanation:

4PH3 --------> P4 + 6H2

From the stochiometry of the reaction,

4 moles of Phosphine gives 1 mole of Phosphorus

3 moles of Phosphine will give (3×1)/4 moles of Phosphorus.

Therefore, 0.75 moles of Phosphorus is produced.

Similarly, 4 moles of Phosphine gives 6 moles of Hydrogen

3 moles of Phosphine will give (3×6)/4 moles of Hydrogen.

Therefore, 4.5 moles of Hydrogen is produced.

QED!

Answer:

The terms used to describe the given process in Chemical weathering.

Explanation:

Weathering of rock is defined as breaking down of the rock into small pieces.

There are two types pf weathering :

Mechanical weathering : This weathering is due to change in physical parameters : temperature change, pressure change etc.

For example : When water soaked up in cracks or crevices of rocks freezes it expands and physically breaks the rock.

Chemical weathering : This weathering is decomposition of rocks due to action of chemicals.This type of weathering also changes chemical composition of rocks.

For example : when gases like carbon dioxide, sulfur oxide get dissolves in water present in rock to form weak acid which ease up the dissolving of rock in that weak acid.

Answer: r=132pm

Explanation:

r = ⟨r⟩=5a0/Z

r=(5(5.29177*〖10〗^(-11) m) x^2)/2

r=132pm

Answer:

0

Explanation:

Δk = (kf - Ki). Kf is 0 because your stopping it [m(v_i)^2 ]/2q = V

The potential difference required to bring a proton to rest can be calculated by knowing the initial kinetic energy of the proton. This energy, when applied in the opposite direction, would act to decelerate the proton and bring it to rest.

The potential difference required to stop a moving proton can be calculated using the equation PEelec = qV, where q is the proton's charge and V is the potential difference (also known as voltage). Given that the proton's charge, q = qe = 1.6×10−¹⁹ Coulombs, we can rearrange the equation to solve for V: V = PEelec/q. If we know the initial kinetic energy of the proton (its energy due to motion, which can be thought of as the electrical energy it gained from accelerating through the potential difference), then the same voltage (potential difference) applied in the opposite direction will bring the proton to rest.

In other words, if the proton gained a certain amount of energy (in electron volts, eV) while accelerating through a potential difference, it will require the same amount of energy in the opposite direction to decelerate and come to rest.

For example, if the proton gained 1 electron Volt (1 eV) of energy from the potential difference, it would require a potential difference of -1 V to bring it to rest. This is because 1 eV = (1 V)(1.6×10−¹⁹ C).

https://brainly.com/question/30893775

#SPJ12

Answer:

Photosystems PSI (P700) and PSII (P680) and photolysis of water releases energy

In the form of movement of electrons which is later extracted as ATP

Explanation:

On absorbing light energy electrons obtained from photolysis of water and those present in and those present in the reaction centres PSI and PSII move to the higher energy level and electron acceptors accept them. They then move down through the electron transport chain to the lower energy level during which ATP is produced which is a chemical form of energy.

Answer:

A

Explanation:

To label an element correctly using a combination of the symbol, mass number and atomic number furnishes some important information about the element.

We can obtain these information from the element provided that correct labeling of the element is presented. Firstly, after writing the symbol of the element, the atomic number is placed as a subscript on the left while the mass number of the atomic mass is placed as a superscript on the same left.

Looking at the question asked, we have the element symbol in the correct position as Ca, with 42 also in the correct position which is the mass number. The third number which is 20 is thus the atomic number of the element.

Answer:

0.1976 atm is the total pressure in the container at equilibrium.

Explanation:

The value of [tex]K_p[/tex] for the given reaction = 0.842

Partial pressure of the hydrogen sulfide = 0.104 atm

Partial pressure of the hydrogen sulfide at equilibrium = (0.104-x) atm

Partial pressure of the hydrogen gas at equilibrium = x

Partial pressure of the sulfur gas at equilibrium = x

[tex]H_2S(g)\rightleftharpoons 2H_2(g)+S(g)[/tex]

Initially

0.104 atm                      0  0

At equilibrium

(0.104 -2x)                      2x   x

The expression of  [tex]K_p[/tex] is given by ;

[tex]K_p=\frac{x\times x}{(0.104 -x) }[/tex]

[tex]0.842 =\frac{x^2}{(0.104-x)}[/tex]

Solving for x:

x = 0.0936 atm

Partial pressure of the hydrogen sulfide at equilibrium = (0.104-x) atm

= (0.104-0.0936 ) atm = 0.0104 atm

Partial pressure of the hydrogen gas at equilibrium = x = 0.0936 atm

Partial pressure of the sulfur gas at equilibrium = x = 0.0936 atm

Total pressure in the container will be sum of all the partial pressure of the hydrogen sulfide gas, hydrogen gas and sulfur gas at the equilibrium.

P = 0.0104 atm + 0.0936 atm + 0.0936 atm = 0.1683 atm

0.1976 atm is the total pressure in the container at equilibrium.

The total pressure in the system at equilibrium is calculated using the equilibrium constant Kp and the initial pressure of the system. By setting up a equilibrium constant expression and solving the quadratic equation for 'x', the change in pressure, we find that the total pressure at equilibrium in the system is ~0.101 atm.

The decomposition reaction of H2S into H2 and S is a chemical equilibrium problem in which the equilibrium constant is given in terms of pressure, or Kp. We know that at the beginning, only H2S is present at a pressure of 0.104 atm, and at equilibrium, the pressure of H2S decreases by 'x', being 'x' the pressure of H2 and S at equilibrium. According to the expression of the equilibrium constant Kp, Kp = (pH2* pS) / p_H2S = x^2 / (0.104-x).

From here, if we solve for 'x' using the quadratic formula and the given Kp = 0.842, we find two solutions, ~0.0967 atm and ~0.0072 atm. We discard the result 0.0967 because it cannot be higher than the initial pressure of the system, so the correct 'x' is ~0.0072 atm. Therefore, the total pressure will be the sum of the individual pressures at equilibrium. Total Pressure = pH2 + pS + p_H2S = 2x + (0.104-x) = 2*0.0072 + (0.104-0.0072) = ~0.101 atm.

https://brainly.com/question/3920294

#SPJ12

Answer:

The answer to your question is None of your answers is correct, maybe the data are wrong.

Explanation:

Data

Concentration 1 = C1 = 1 M

Volume 2 = 5 ml

Concentration 2 = 0.05 M

Volume 1 = x

To solve this problem use the dilution formula

             Concentration 1 x Volume 1 = Concentration 2 x Volume 2

Solve for Volume 1

              Volume 1 = (Concentration 2 x Volume 2)/ Concentration 1

Substitution

              Volume 1 = (0.05 x 5) / 1

Simplification

              Volume 1 = 0.25/1

Result

               Volume 1 = 0.25 ml

Answer:

-1.9 KJ/mol

Explanation:

In order to solve the problem, we have to rearrange the equations in a way in which all molecules of O₂ and CO₂ are eliminated:

2C(diamond) + 2O₂(g) → 2CO₂(g)     ΔH₁= 2 x (-395.4 KJ) ------> we multiply by 2 both reactants and products

2 CO₂(g) → 2CO(g) + O₂(g)         ΔH₂= 566.0 KJ

CO₂(g) → C(graphite) + O₂(g)     ΔH₃= -1 x (-393.5 KJ) ------> we use reverse rxn

2CO(g) → C(graphite) + CO₂(g)   ΔH₄= -172.5 KJ

When we cancel the molecules that appear both in reactants and products, the total reaction is the following:

2C(diamond) → 2C(graphite)

ΔHt= ΔH₁ + ΔH₂ + ΔH₃ + ΔH₄ = 2 x (-395.4 KJ) + 566.0 KJ + (-1 x (-393.5 KJ)) - 172.5 KJ

ΔHt= 347.2 KJ

This is for 2 mol of C(diamond) which are converted in 2 mol of C(graphite). To obtain ΔH for the reaction of 1 mol C(diamond) to 1 mol (graphite) we have to divide into 2:

ΔH= -3.8 KJ/2mol= -1.9 KJ/mol

To determine ΔHrxn for the reaction C(diamond) → C(graphite), we can use Hess's law and the given equations. By canceling out common compounds/products and summing the remaining equations, we can calculate ΔHrxn. The enthalpy change can be determined by summing the enthalpy changes of the canceled equations.

This type of calculation usually involves the use of Hess's law, which states: If a process can be written as the sum of several stepwise processes, the enthalpy change of the total process equals the sum of the enthalpy changes of the various steps. For this specific reaction, we can use the given equations to determine the enthalpy change ΔHrxn for C(diamond) → C(graphite).

To obtain the ΔHrxn for C(diamond) → C(graphite), we need to cancel out common compounds/products in these equations. From the given equations, we can see that CO2(g) is a common compound in steps 1, 2, and 3, and thus we can cancel it out. Likewise, O2(g) is present in steps 1, 2, and 3, so we can also cancel it out. By summing the canceled equations, we get the final equation:

C(diamond) → C(graphite)

The enthalpy change for this reaction is the sum of the enthalpy changes of the canceled equations:

ΔHrxn = ΔH1 + ΔH2 + ΔH3 + ΔH4 = -395.4 kJ + 566.0 kJ + (-393.5 kJ) + (-172.5 kJ) = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + (-393.5 kJ) + 566.0 kJ + (-172.5 kJ) = -395.4 kJ - 393.5 kJ + 566.0 kJ - 172.5 kJ = -395.4 kJ - 393.5 kJ + 566.0 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ = -395.4 kJ + 566.0 kJ - 393.5 kJ - 172.5 kJ

https://brainly.com/question/28988531

#SPJ3

Answer:

[tex]\rho=7.15\ g/cm^3[/tex]

Explanation:

The expression for density is:

[tex]\rho=\frac {Z\times M}{N_a\times {{(Edge\ length)}^3}}[/tex]

[tex]N_a=6.023\times 10^{23}\ {mol}^{-1}[/tex]

M is molar mass of Chromium = 51.9961 g/mol

For body-centered cubic unit cell , Z= 2

[tex]\rho[/tex] is the density  

Radius = 125 pm = [tex]1.25\times 10^{-8}\ cm[/tex]

Also, for BCC, [tex]Edge\ length=\frac{4}{\sqrt{3}}\times radius=\frac{4}{\sqrt{3}}\times 1.25\times 10^{-8}\ cm=2.89\times 10^{-8}\ cm[/tex]

Thus,  

[tex]\rho=\frac{2\times \:51.9961}{6.023\times \:10^{23}\times \left(2.89\times 10^{-8}\right)^3}\ g/cm^3[/tex]

[tex]\rho=7.15\ g/cm^3[/tex]

The density of solid crystalline chromium will be "7.15 g/cm³".

According to the question,

Radius,

Molar mass of Chromium,

For body-centered,

For BCC,

The edge length will be:

= [tex]\frac{4}{\sqrt{3} }\times radius[/tex]

= [tex]\frac{4}{\sqrt{3} }\times 1.25\times 10^{-8}[/tex]

= [tex]2.89\times 10^{-8} \ cm[/tex]

hence

The expression for density will be:

→  [tex]\rho = \frac{Z\times M}{N_a(Edge \ length)^3}[/tex]

By substituting the values, we get

      [tex]= \frac{2\times 51.9961}{6.023\times 10^{23}\times (2.89\times 10^{-8})}[/tex]

      [tex]= 7.15 \ g/cm^3[/tex]

Thus the above approach is right.

Learn more:

https://brainly.com/question/23711097

Answer : The concentration of the NaOH solution is, 0.738 M

Explanation :

To calculate the concentration of base, we use the equation given by neutralization reaction:

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]H_2SO_4[/tex]

[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is NaOH.

We are given:

[tex]n_1=2\\M_1=0.300M\\V_1=24.6mL\\n_2=1\\M_2=?\\V_2=20.0mL[/tex]

Putting values in above equation, we get:

[tex]2\times 0.300M\times 24.6mL=1\times M_2\times 20.0mL[/tex]

[tex]M_2=0.738M[/tex]

Thus, the concentration of the NaOH solution is, 0.738 M

Answer:

Vital

Explanation:

Hello! The factors mentioned previously are essential substances for the life and health of our bodies. Not only in humans, but also for animals. They are factors that are linked and contribute to physical and mental energy, growth and life. Are essentials because humans can't live without that.

Thanks for your question! Feel free to ask more!

Answer:

Option B.

Explanation:

Let's replace the data given in the formula of Ideal Gases Law.

P. V = n . R . T

3L . 1000kPa = n . 8.31 L.kPa/mol.K . 298K

(3L . 1000 kPa) / ( 8.31 L.kPa/mol.K . 298K) = n

1.21 moles

The number of moles of oxygen by using ideal gas equation is 1.21 moles. Hence, the correct option is B.

[tex]PV=nRT[/tex]

Here, P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is the temperature.

We can calculate the number of moles by using the above equation as follows:-

[tex]PV = n R T\\ 1000kPa\times 3L = n \times 8.31 L.kPa/mol.K \times298K\\(3L . 1000 kPa) / ( 8.31 L.kPa/mol.K . 298K) = n\\n=1.21 moles[/tex]

So, the number of moles of oxygen is 1.21 moles.

Learn more about the ideal gas equation here

brainly.com/question/4147359