What is the correct answer?

Answer:

It’s D

Explanation:

It’s an alloy so it is not pure. If you take a small sample and analyze it, the mixture will be similar throughout. Think of Gatorade as a homogeneous mixture because it is the same concentration of all ingredients throughout. Think of pizza for heterogeneous mixtures. There isn’t the pepperoni (or whatever you prefer) throughout.

Sterling silver is a homogeneous mixture, or a solution, because it is a combination of silver and other metals that are uniformly mixed together to create a consistent composition.

Sterling silver is considered to be a homogeneous mixture, or a solution. A homogeneous mixture is a combination of two or more substances that are so intimately mixed that they behave as a single substance. In the case of sterling silver, it is a mixture of silver and other metals, such as copper, that are uniformly mixed together to create a uniform composition throughout.

Answer:

the boiling of 10g of liquid water

Answer:

The correct option is "the condensation of 10 g of gaseous water"

Explanation:

In condensation,gaseous stats is changes into  liquid. So it will release more energy to convert from one state to another state.So it is exothermic process in which heat is released.

Answer:-64

Explanation:

Final answer:

Convergent boundaries can form both mountain ranges and trenches, but the specific feature formed depends on whether the boundary involves an oceanic plate or a continental plate.

Explanation:

At convergent boundaries, tectonic plates move toward each other. The type of feature that forms at convergent boundaries depends on the types of plates involved and their interactions. Here are the possible features associated with convergent boundaries:

A. Mountain Range: Formed when two continental plates collide, resulting in the uplift of crustal material and the creation of a mountainous region.

B. Trench: Formed when an oceanic plate collides with a continental plate, causing the denser oceanic plate to subduct beneath the continental plate. This leads to the formation of a deep ocean trench.

C. Rift Valley: This typically forms at divergent boundaries where tectonic plates move away from each other. It is not a typical feature of convergent boundaries.

D. Mid-Ocean Ridge: Formed at divergent boundaries where oceanic plates move apart, allowing magma to rise from the mantle and create a new oceanic crust. It is not a typical feature of convergent boundaries.

Convergent boundaries are zones where plates move together. When an ocean plate meets a continental plate, the heavier ocean plate is pushed beneath the continental plate, forming a trench. When two continental plates collide, they smash into each other, forming a large mountain range. Hence, the correct answer is A. mountain range.

It is true that the major ways people are exposed to toxins are by ingesting them, inhaling them, injecting  them, or absorbing them through the skin.

Explanation:

Toxins can enter in four various ways into our body often referred as "route of exposure". It is one among many factors affecting toxicity.

Inhalation: When the toxin is a gas, it is usually absorbed into the body by inhalation. Inhalation of toxins may cause respiratory and lung damage. Eg: cigarette smoke

Absorption: If a toxin enters the human eye or skin, it can be absorbed into the bloodstream. This is called absorption. The skin can prevent some toxins from entering the body. For example: work stations (gas stations) where people work with toxins

Ingestion means that the person has ingested the toxin. Some chemicals cannot get into blood from digestive tract. For example: drinking contaminated water.

The injected toxin enters the body when the person carrying the toxin breaks the skin. Injections can end in veins, muscles or just under the skin. Eg: Botulinum (used to get rid of wrinkles)

In bio-chemistry, poison, a natural or synthetic substance that damages living tissue and has a harmful or lethal effect on the body, regardless of whether it is absorbed, inhaled or injected through the skin.

Answer:

3.0 atm is correct

Explanation:

303,900 pa = 2.999259 atm

303,900 pa = 2279.4371 mmHg

Answer:3atm

Explanation:

101325 Pa = 1atm

303,900 Pa = 303,900/101325 = 3atm

Answer:

C. 239

Explanation:

-34 + 273.15 = 239.15

The equation to convert celsius into kelvin is C = K - 273.15

Answer: the world wouldn’t be the same today

Explanation:

Answer:

                     7.52 × 10²³ Molecules of OCl₂

Explanation:

                     As we know one mole of any substance contains 6.022 × 10²³ particles (atoms, ions, molecules or formula units). This number is also called as Avogadro's Number.

The relation between Moles, Number of Particles and Avogadro's Number is given as,

                         Number of Particles   =  Moles  ×  6.022 × 10²³

In given statement the particles are the molecules of Oxygen dichloride OCl₂ Hence,

Putting values,

                         Molecules of OCl₂  =  1.25 mol  × 6.022 × 10²³ Molecules/mol

                         Molecules of OCl₂  =  7.52 × 10²³ Molecules

Answer: a. 410 K

b. 296 K

c. 394 K

d. -180 °C

e. 224°C

f. -3 °C

Explanation:

For °C to K : use °C + 273 = K

For K to °C : use °C = K - 273

Answer: 3.2778x10-10 moles Ca

Explanation: solution

1.974x10-¹⁴ atoms Ca x 1 mole Ca/ 6.022x10²³ atoms Ca

= 3.278x10-10 moles Ca

Answer:

no <3

Explanation:

Answer: S8 + 8O2 => 8SO2

Explanation: The equation is now balanced. Both Sulfur have 8 atoms in the reactant and product side. Oxygen have 16 atoms on each side.

Answer:

c

Explanation:

there just issues with this site I'm not sure of

Answer: 27.61g

Explanation:

First thing first, generate a balanced equation for the reaction as illustrated below:

CrCl3 + 3AgNO3 —> Cr(NO3)3 + 3AgCl

Next, we'll find the molar mass of CrCl3 and AgCl:

Molar Mass of CrCl3 = 52 + (3x35.5)

= 158.5g/mol

Molar Mass of AgCl = 108 + 35.5 = 143.5g/mol

But from the balanced equation, 3 mol of AgCl was produced. Therefore, the mass conc. of AgCl from the equation = 3 x 143.5 = 430.5g.

From the equation,

158.5g of CrCl3 produced 430.5g of AgCl.

Therefore, Xg of CrCl3 will produce 75g of AgCl i.e

Xg of CrCl3 = (158.5x75) / 430.5 =27.61g.

So, 27.61g of CrCl3 will produce 75g of AgCl

Final answer:

The problem requires balancing the chemical equation and performing stoichiometry calculations to find how many grams of CrCl₃ are required to produce 75.0 grams of AgCl. Additionally, the use of Ksp allows for the prediction of precipitation conditions in solutions.

Explanation:

The student's question involves a stoichiometry calculation and the solubility product concept, both of which are key topics in chemistry. To find the grams of Chromium Chloride III (CrCl₃) needed to produce 75.0 grams of Silver Chloride (AgCl), one needs to follow these steps:

As for the solubility product (Ksp) questions, they are based on the solubility equilibrium and precipitation. For instance, the Ksp for silver chloride (AgCl) is calculated using the concentration of silver ions [Ag⁺] and chloride ions [Cl⁻] in the solution at equilibrium. If given the Ksp and one ion concentration, you can determine the concentration at which precipitation occurs by rearranging the Ksp expression.

Boyle's law is used to solve this problem.

The Volume occupied is 56 mL.

Explanation:

As per the Boyle's law, Pressure and volume are inversely proportional to each other, when mass and temperature remains constant or the product of the volume and pressure remains constant.

PV = C

P₁V₁ = P₂V₂

V₂ = P₁V₁ / P₂

  = 130 × 97 / 225

  = 56  mL

Answer:

Developing a Conclusion

Answer:

The conclusion

Explanation:

It states what the final results are and helps you double check if your hypothesis was correct.

Antimony

Explanation:

The element with this ionization energies is antimony, Sb.

This is because the element has 5 ionization energies.

IE1 579

IE2 1814

IE3 3740

IE4 12479

IE5 14840

Ionization energy is the amount of energy required for the removal of an electron in an atom.

Each shell in an atom have their own respective ionization energies that increases as we penetrate into the atom.

learn more:

Periodic table https://brainly.com/question/2014634

#learnwithBrainly

The one to determine the number of core electrons an atom has To subtract the group number from the atomic number. Therefore, option B is correct.

The charge number of an atomic nucleus is the chemical element's atomic number, also known as nuclear charge number. This is the number of protons present in the nucleus of each atom of that element, or the proton number, for conventional nuclei. Ordinary chemical elements can be uniquely identified by their atomic number.

The number of protons in an atom is the atomic number. It is sometimes referred to as the proton number for this reason. The capital letter Z is used to represent it in calculations. The word zahl, which meaning number of numerals in German, is where the letter Z originates.

The atomic number, or number of protons, is displayed in the upper left. The element's letter sign appears in the centre.

Thus, option B is correct.

To learn more about an atomic number, follow the link;

https://brainly.com/question/16858932

#SPJ2

The number of electrons transferred of the process is 5746.25×[tex]10^{18}[/tex]e.

Explanation:

The number of electrons that were transferred is 5.746 × 10²¹

From the question,

We are to determine the number of electrons that were transferred.

Using the formula

Q = ne

Where

Q is the total charge

n is the number of electrons

and e is the charge of 1 electron (e = 1.6 × 10⁻¹⁹ C)

From the given information

Q = 919.4 C

Putting this into the formula, we get

919.4 = n × 1.6 × 10⁻¹⁹

∴ n = 919.4 ÷ (1.6 × 10⁻¹⁹)

n = 5.746 × 10²¹

Hence, the number of electrons that were transferred is 5.746 × 10²¹

Learn more here: https://brainly.com/question/14653647

Answer:

                        4.21 mol of SnO₂

Explanation:

                      The balance chemical equation for this single replacement reaction is as follow;

                              SnO₂ + 2 H₂ → Sn + 2 H₂O

Step 1: Calculate moles of Sn as:

Moles = Mass / A.Mass

Moles = 500 g / 118.71 g/mol

Moles = 4.21 moles

Step 2: Find out moles of SnO₂ as,

According to balance equation,

                      1 mole of Sn is produced by  =  1 mole of SnO₂

So,

               4.21 moles of Sn will be produced by  =  X moles of SnO₂

Solving for X,

                      X =  1 mol × 4.21 mol / 1 mol

                       X  =  4.21 mol of SnO₂

Answer:

b

Explanation:

In photosynthesis, light energy from the sun is harvested and it is converted into chemical energy. The primary source of energy used by producers during photosynthesis is light energy from the sun. The correct option is B.

The process which takes place in the chloroplasts through photosynthetic pigments like chlorophyll a, chlorophyll b, carotene and xanthophyll to synthesize nutrients by using carbon dioxide, water and sunlight is known as the photosynthesis.

The plants use light energy to convert carbon dioxide and water into glucose and oxygen. This sugar molecules are used by the green plants as the energy source which helps them to grow.

The process photosynthesis is also exhibited by the algae, cyanobacteria, etc. to convert solar energy into chemical energy. Light is the major factor which complete this process.

Thus the correct option is B.

To know more about photosynthesis, visit;

https://brainly.com/question/29775046

#SPJ6

Answer:   ?????????????????????

Explanation:

Answer:

The correct answer is : It can help cones to open and release seeds.

Explanation:

Answer:

The answer is A. It can help cones open and release seeds.

Explanation:) edge 2023 brainliest would be appreciated

Answer:3

Explanation: I

'm not sure

The maximum number of orbitals with n = 4, L = 1 is 16, distributed among s, p, d, and f subshells.

There can be a total of 16 orbitals. These include: one 4s orbital, three 4p orbitals, five 4d orbitals, and seven 4f orbitals. Each subshell has a specific number of orbitals based on the values of ml.

The student has asked about the maximum number of orbitals with n = 4 and L= 1. In quantum chemistry, the principal quantum number n determines the shell, and the azimuthal or angular momentum quantum number L (also denoted as l) determines the subshell type. For n = 4, l can have values of 0 (s subshell), 1 (p subshell), 2 (d subshell), and 3 (f subshell). When l = 1, which is the p-type subshell, the magnetic quantum number ml can have three values: -1, 0, and +1. Thus, there are three orbitals corresponding to the p subshell when n = 4 and l = 1, namely the 4p orbitals.

Answer: A)

Explanation:

the deposition environment has changed from wind-dominated in the past to stream-dominated today.

Final answer:

The presence of dune features in the streambeds suggests that the geologic history of the area involved a change in the depositional environment from wind-dominated to stream-dominated over time.

Explanation:

The geologist studying the presence of dune features in streambeds can conclude about the geologic history of the area that there has been a change in the depositional environment. Specifically, the correct answer is D.

The depositional environment has changed from wind-dominated in the past to stream-dominated today. This conclusion is based on the understanding that dunes, with their characteristic cross-bedding patterns, are typically formed by wind in desert environments.

Thus, finding these dune features preserved in current streambeds indicates that the area was once a desert with active wind erosion and deposition, but now it is characterized by stream erosion and deposition.

Erosion and deposition are dynamic processes that reflect changes in Earth's surface through time. The study of sedimentary structures like cross-bedding is fundamental in reconstructing paleoenvironments and understanding how the forces of wind, water, and other elements have shaped the landscape.

Recognizing cross-bedding patterns within sediments allows geologists to determine the direction of the ancient winds or water flows that created them.

An unstable isotope changes until it reaches a different element that is stable.

An unstable isotope changes until it reaches a different isotope of the same element that is stable.

Explanation:

Radioactive decay is the breakdown of an unstable (heavier) atom into stable (lighter) atom. It mainly involves the loss of atomic nucleic particles such as protons and neutrons. If protons are lost in the decay, then the element of the atom will change. However, if only a few neutrons are lost, the element may remain the same but the products will be a more stable isotope of the same element with fewer neutrons (hence also mass number)

Learn More:

For more on radioactive decay check out;

https://brainly.com/question/1770619

https://brainly.com/question/10745621

#LearnWithBrainly

The statements that best describe the process of radioactive decay are:

The statements that best describe the process of radioactive decay are:

1. An unstable isotope changes until it reaches a different element that is stable.

  - This statement is correct. Radioactive decay involves the transformation of an unstable isotope into a different element, which can be stable.

2. An unstable isotope changes until it reaches a different isotope of the same element that is unstable.

  - This statement is also correct. In some cases, the process of radioactive decay can lead to the formation of a different isotope of the same element, and this isotope may remain unstable.

The other statements are not accurate:

- An unstable isotope changes until it reaches a different isotope of the same element that is unstable.

- An unstable isotope changing into a different element that is unstable is not a common outcome of radioactive decay.

- A stable isotope does not change into a different element through radioactive decay.

In summary, radioactive decay involves the transformation of unstable isotopes into different elements or isotopes, which can be either stable or unstable.

For more such questions on radioactive decay:

https://brainly.com/question/1770619

#SPJ3

The probable question may be:

Which statements best describe the process of radioactive decay? Check all that apply.

An unstable isotope changes until it reaches a different element that is unstable.

An unstable isotope changes until it reaches a different element that is stable.

A stable isotope changes until it reaches a different element that is unstable.

A stable isotope changes until it reaches a different element that is stable.

An unstable isotope changes until it reaches a different isotope of the same element that is unstable.

An unstable isotope changes until it reaches a different isotope of the same element that is stable.

Answer:

white

Explanation:

If only blue light is shone onto a red shirt, the shirt would appear black, because the blue would be absorbed and there would be no red light to be reflected. White objects appear white because they reflect all colors. Black objects absorb all colors so no light is reflected.

Answer:

White

Explanation: