How many grams of Aldol product can be produced from the complete reaction of 0.2 grams of vanillin with an excess of acetone in the presence of aqueous base? Enter only the number with two significant figures.

Complete Question

The diagram of the complete question is shown on the first uploaded image.

Answer:

a) The approximate absorbance of benzoic acid at 228 nm? : A = 0.8

b) The molar absorptivity(∈)

of benzoic acid at 228 nm? : ∈   =  [tex]1.12 * 10^{4} M^{-1} cm^{-1}[/tex]

Explanation:

Looking at the absorbance spectra, we can see that the approximate absorbance of benzoic acid at 228 is 0.8.

mass concentration of benzoic acid = [tex]8.74 \frac{mg}{L} =8.74 * 10^{-3} \frac{g}{L}[/tex]

the molar concentration of benzoic acid = (mass concentration of benzoic acid) / (molar mass of benzoic acid )

molar concentration of benzoic acid = [tex](8.74 *10^{-3} \frac{g}{L} ) /(122.12\frac{g}{mol} )[/tex]

molar concentration of benzoic acid = [tex]7.157 * 10^{-5}M[/tex]

molar absorptivity (∈) of benzoic acid = (absorbance) /[ (molar concentration of benzoic acid ) × (path length) ]

 ∈    = (0.8) / [ ([tex]7.157 *10^{-5}M[/tex]) ×(1.00 cm)]

        =  [tex]1.12 * 10^{4} M^{-1} cm^{-1}[/tex]

The approximate absorbance of benzoic acid at 228 nanometers as described in the provided spectra plot is close to 0.8. The absorbance reveals the amount of light absorbed by the solution, which can further be used to determine the concentration of a compound.

Based on the provided description of the absorbance spectra, the approximate absorbance of benzoic acid at 228 nanometers is close to 0.8. In many analytical procedures, the values of absorbance help determine the concentration of a compound.

It's important to understand that absorbance is a measure of the quantity of light absorbed by a solution, in this case, the solution of benzoic acid. The higher the absorbance, the more light is absorbed and less is transmitted through the solution. Each compound has a unique absorbance spectrum, serving like a 'fingerprint' which helps in identifying substances.

https://brainly.com/question/33651216

#SPJ3

Answer:

P = 1/8

Explanation:

The wave function of a particle in a one-dimensional box is given by:

[tex] \psi = \sqrt \frac{2}{L} sin(\frac{n \pi x}{L}) [/tex]

Hence, the probability of finding the particle in the  one-dimensional box is:

[tex] P = \int_{x_{1}}^{x_{2}} \psi^{2} dx [/tex]

[tex] P = \int_{x_{1}}^{x_{2}} (\sqrt \frac{2}{L} sin(\frac{n \pi x}{L}))^{2} dx [/tex]

[tex] P = \frac{2}{L} \int_{x_{1}}^{x_{2}} (sin^{2}(\frac{n \pi x}{L}) dx [/tex]

Evaluating the above integral from x₁ = 0 to x₂ = L/8 and solving it, we have:

[tex] P = \frac{2}{L} [\frac{L}{16} (1 - 4\frac{sin(\frac{n \pi}{4})}{n \pi})] [/tex]

[tex] P = \frac{1}{8} (1 - 4\frac{sin(\frac{n \pi}{4})}{n \pi}) [/tex]    

Solving for n=4:

[tex] P = \frac{1}{8} (1 - 4\frac{sin(\frac{4 \pi}{4})}{4 \pi}) [/tex]    

[tex] P = \frac{1}{8} (1 - \frac{sin (\pi)}{\pi}) [/tex]    

[tex] P = \frac{1}{8} [/tex]

I hope it helps you!

The total probability of finding a particle in this one-dimensional box is [tex]\frac{1}{8}[/tex]

Given the following data:

To determine the total probability of finding a particle in a one-dimensional box:

A particle in a one-dimensional box describes the translational motion of a particle that is trapped inside an infinitely deep well, from which it is unable to escape.

Mathematically, the wave function of a particle in a one-dimensional box is given by this formula:

[tex]\psi = \sqrt{\frac{2}{L} } sin\frac{n\pi}{L} x[/tex]   ...equation 1.

Where:

In a one-dimensional box, the probability of finding a particle is given by the formula:

[tex]P=\int\limits^{x_2}_{x_1} {\psi^2} \, dx[/tex]    ...equation 2.

Substituting eqn. 1 into eqn. 2, we have:

[tex]P=\int\limits^{x_2}_{x_1} {(\sqrt{\frac{2}{L} } sin\frac{n\pi}{L} x)^2} \, dx \\\\P = \frac{2}{L} \int\limits^{x_2}_{x_1} {( sin^2(\frac{n\pi}{L} x))} \, dx\\\\P=\frac{2}{L} [\frac{L}{16} (1-4(\frac{sin\frac{n\pi}{4} }{n\pi} ))]\\\\P=\frac{1}{8} (1-4(\frac{sin\frac{n\pi}{4} }{n\pi} ))[/tex]

Substituting the value of n, we have:

[tex]P=\frac{1}{8} (1-4(\frac{sin\frac{4\pi}{4} }{4\pi} ))\\\\P=\frac{1}{8} (1-(\frac{sin\pi }{\pi} ))\\\\P=\frac{1}{8} (1-0)\\\\P=\frac{1}{8}[/tex]

Read more: https://brainly.com/question/14593563

Answer:

The correct answer is: 2.8 ppm Ca²⁺ and 0.55 ppm Mg²⁺

Explanation:

ppm (by mass) is equal to: mass solute (mg)/mass solution(kg)

First, we use the solution density to calculate the mass of 100.0 L solution in kg:

mass solution= 100.0 L x 1.001 g/ml x 1000 ml/ 1L x 1kg/1000 g= 100.1 kg

Then, we divide the mass of each ion (in mg) into the mass solution to obtain the ppm:

mg Ca²⁺= 0.280 g x 1000 mg/1g= 280 mg

mg Mg²⁺= 0.0550 g x 1000 mg/1g= 55 mg

ppm Ca²⁺= 280 mg Ca²⁺/ 100.1 kg solution= 2.797 mg Ca²⁺/kg solution= 2.8 ppm

ppm Mg²⁺= 55 mg Mg²⁺/ 100.1 kg solution= 0.549 mg Mg²⁺/kg solution= 0.55 ppm

Answer:

Explanation:

The given reaction is exothermic . So ΔH is negative .

Gas is evolving so work done by gas is positive or w is positive.

Change in internal energy that is ΔU is negative.

q = u - w

u is negative , w is positive so q is negative .

Answer:

k = 6.31 x 10⁻³ min⁻¹

Explanation:

The equation required to solve this question is:

k = 0693 / t half-life

This equation is derived from the the equation from the radioctive first order reactions:

ln At/A₀ = -kt

where At is the number of isoopes after a time t , and A₀ is the number of of isotopes initially. The half-life is when the number of  isotopes has decayed by a half, so

ln(1/2) = -kt half-life

-0.693 = - k t half-life

t half-life = 109.8 min

⇒ k = 0.693 / t half-life = 0.693 / 109.8 min = 6.31 x 10⁻³ min⁻¹

The rate constant for the decomposition of Fluorine-18 is 0.00631 min⁻¹, calculated using the formula k = 0.693 / t₁/₂ where the half-life t₁/₂ is 109.7 minutes.

The decay of Fluorine-18 (¹8F) is described by first-order kinetics, which means the rate of decay is proportional to the amount of ¹8F present. The half-life of ¹8F is given as 109.7 minutes. To determine the rate constant (k) for the decomposition of Fluorine-18, we use the relationship between the half-life (t1/2) and rate constant for first-order reactions: k = 0.693 / t1/2. Substituting the given half-life into this equation, we get:

k = 0.693 / 109.7 min = 0.00631 min-1

This is the rate constant for the decomposition of Fluorine-18.

https://brainly.com/question/20305871

#SPJ2

Answer:

A. 11.1%

B. 0.0291

C. 1.57 M

D. 1.67 m

Explanation:

A.

Mass of KCl (solute): 28.0 g

Mass of water (solvent): 225 g

Mass of solution: 28.0 g + 225 g = 253 g

The mass percent of KCl is:

%KCl = (mass of KCl/mass of solution) × 100%

%KCl = (28.0 g/253 g) × 100%

%KCl = 11.1%

B.

The molar mass of KCl is 74.55 g/mol. The moles of KCl are:

28.0 g × (1 mol/74.55 g) = 0.376 mol

The molar mass of water is 18.02 g/mol. The moles of water are:

225 g × (1 mol/18.02 g) = 12.5 mol

The total number of moles is 0.376 mol + 12.5 mol = 12.9 mol.

The mole fraction of KCl is:

X(KCl) = moles of KCl / total moles

X(KCl) = 0.376 mol / 12.9 mol

X(KCl) = 0.0291

C.

The volume of the solution is 239 mL (0.239 L).

The molarity of KCl is:

M = moles of KCl / liters of solution

M = 0.376 mol / 0.239 L

M = 1.57 M

D.

The molality of KCl is:

m = moles of KCl / kilograms of solvent

m = 0.376 mol / 0.225 kg

m = 1.67 m

Answer:

The PH of the mixture is 4.74

Explanation:

The number of millimoles of acetic acid is calculated using the formula:

No of millimoles= Molarity * Volume( in ml)

= 0.25M * 30ml = 7.5 moles

Number of millimoles of KOH is calculated using:

Number of millimoles = Molarity * Volume ( in ml)

=0.05M * 75ml

= 3.75 moles

The PH of the solution is derived using:

pH = pKa + log [salt] / acid

= [tex] -log [ 1.8 * 10^5 ] + log [ 3.75 mmoles/ 3.75 mmoles] [/tex]

=4.74

Answer:

Minimum volume of H₂SO₄ required for H₂SO₄ to be in excess = 0.0556 mL

Explanation:

Pb(NO₃)₂ + H₂SO₄ -----> PbSO₄ + 2HNO₃

For this reaction, we know that the max concentration of Pb(NO₃) according to the bottle is 0.999M and to ensure the other reactant in the reaction is in excess, we'll do the calculation with a Pb(NO₃) that's a bit higher, that is, 1.0M.

Knowing that Concentration in mol/L = (number of moles)/(volume in L)

Number of moles of Pb(NO₃) added = concentration in mol/L × volume in L = 1 × 0.001 = 0.001 mole

According to the reaction,

1 mole of Pb(NO₃) reacts with 1 mole of H₂SO₄

0.001 mole of Pb(NO₃) will react with 0.001×1/1 mole of H₂SO₄

Therefore number of H₂SO₄ required for the reaction and for the H₂SO₄ to be in excess is 0.001 mole of H₂SO₄

So, the concentration of commercial H₂SO₄ is usually 18.0M, using this as the assumed value.

Volume of H₂SO₄ = (number of H₂SO₄ required for it to be in excess)/(concentration of H₂SO₄)

Volume of H₂SO₄ = 0.001/18 = 0.0000556 L = 0.0556 mL.

QED!!!

Assuming concentrated H₂SO₄ is used for the precipitation, the minimum volume of concentrated H₂SO₄ required to be the excess reagent is 0.0556 mL.

The equation of the reaction between H₂SO₄ and Pb(NO₃)₂ is given below:

Assuming that the concentration of Pb(NO₃)₂ is 1.0M.

Number of moles of Pb(NO₃)₂ in 1.0 mL solution is calculated as follows:

Volume of Pb(NO₃)₂ = 1.0 mL = 0.001 L

Number of moles of Pb(NO₃)₂  = 1.0 * 0.001

Number of moles of Pb(NO₃)₂ = 0.001 moles

From the equation of reaction:

1 mole of Pb(NO₃)₂ reacts with 1 mole of H₂SO₄

0.001 mole of Pb(NO₃)₂ will react with 0.001 moles of H₂SO₄

Therefore number of moles H₂SO₄ required for the reaction and for the H₂SO₄ to be in excess is 0.001 mole of H₂SO₄

Assuming the H₂SO₄ required is concentrated H₂SO₄:

Concentration of concentrated H₂SO₄ = 18.0M

The volume of concentrated H₂SO₄ required is calculated as follows:

Volume of H₂SO₄ = 0.001/18

Volume of H₂SO₄ = 0.0000556 L

Volume of concentrated  H₂SO₄ required = 0.0556 mL.

Therefore, the minimum volume of concentrated H₂SO₄ required to be the excess reagent is 0.0556 mL.

Learn more about molarity and volume at: https://brainly.com/question/26178388

Answer : The molality of a solution is, 0.387 mol/kg

Explanation : Given,

Mass of solute (glycine) = 100.7 g

Mass of solvent (water) = 3.466 kg

Molar mass of glycine = 75.1 g/mole

Formula used :

[tex]Molality=\frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Mass of solvent}}[/tex]

Now put all the given values in this formula, we get:

[tex]Molality=\frac{100.7g}{75.1g/mol\times 3.466kg}[/tex]

[tex]Molality=0.387mol/kg[/tex]

Thus, the molality of a solution is, 0.387 mol/kg

Answer:

The molality of the solution is 0.387 molal

Explanation:

Step 1: Data given

Mass of glycine = 100.7 grams

Mass of H2O = 3.466 kg

Molar mass of glycine = 75.07 g/mol

Step 2: Calculate moles glycine

Moles glycine = mass glycine / molar mass glycine

Moles glycine = 100.7 grams / 75.07 g/mol

Moles glycine = 1.341 moles

Step 3: Calculate molality of the solution

Molality = moles glycine / mass H2O

Molality = 1.341 moles / 3.466 kg

Molality = 0.387 molal

The molality of the solution is 0.387 molal

Answer:

The required volume of the original sample required is 2 micro liter

Explanation:

assuming the original sample concentration is 1N

after  final dilution of 10-2 solution concentration becomes 0.01 N

normality of original sample  = 1 N

normality  of final solution = 0.01 N

volume of  original sample= ?

volume of   final solution  = 0.2 mL

Considering thef formula below :

N1V1 = N2V2

V1 = (N2V2)/N1

= (0.01*0.2)/1

= 0.002 mL

1 milli liter = 1000 micro liter

0.002 mL = 2 micro liter

The original sample required is 2 micro liter

To produce a final dilution of 10^-2 in a total volume of 0.2mL, 2 microliters of original sample are required.

To find out how many microliters of original sample are needed to generate a final dilution of 10^-2 in a total volume of 0.2 mL, you can use the formula: V1 = V2 × D2 / D1. Here, V1 is the volume of the original sample needed, V2 is the final volume required (which is 0.2 mL), D2 is the final dilution (which is 10^-2), and D1 is the original dilution (which is 1 for undiluted samples).

So, plugging these values into the formula gives: V1 = 0.2 mL × 10^-2 / 1 = 0.002 mL. Convert this volume from milliliters to microliters (1 mL = 1000 μL), so V1 = 0.002 mL * 1000 = 2 μL.

So, 2 microliters of original sample are required to produce a final dilution of 10^-2 in a total volume of 0.2 mL.

https://brainly.com/question/35454012

#SPJ3

Answer:

There are 0.0267 moles of oxygen in 0.658 grams of magnesium nitrate.

Explanation:

Mass of magnesium nitrate = m = 0.658 g

Molar mass of magnesium nitrate = M = 148 g/mol

Moles of magnesium nitrate = n

[tex]n=\frac{m}{M}=\frac{0.658 g}{148 g/mol}=0.004446 mol[/tex]

1 mole of magnesium nitrate has 6 moles of oxygen atoms. Then 0.004446 moles magnesium nitrate will have :

[tex]6\times 0.004446 mol=0.026676 mol\approx 0.0267[/tex]

There are 0.0267 moles of oxygen in 0.658 grams of magnesium nitrate.

Explanation:

When we move across a period from left to right then there will occur an increase in electronegativity and also there will occur an increase in non-metallic character of the elements.

As calcium (Ca) is a group 2A element and rubidium (Rb) is a group 1A element. Hence, Rb being an alkali metal is more metallic in nature than calcium (alkaline earth metal).

Both magnesium (Mg) and radium (Ra) are group 2A elements. And, when we move down a group then as the size of element increases so, it becomes easy of the metal atom to lose an electron.

As a result, there occurs an increase in metallic character of the element. Hence, Radium (Ra) is more metallic in nature than magnesium (Mg).

Also, both bromine and iodine are group 17 elements. Since, both of them are non-metals and non-metallic character increases on moving down the group.

Therefore, bromine (Br) is more metallic than iodine.

In the context of the periodic table, metallicity increases further down a group and decreases from left to right across a period. Therefore, Rb, Ra, and I are expected to be more metallic than Ca, Mg, and Br respectively.

In an element, the metallicity increases as we go down a group (or column) on the periodic table, and decreases as we move from left to right across a period (or row). Therefore, based on the periodic table:

https://brainly.com/question/28650063

#SPJ3

Answer:

1.12×10¹¹ kg of CO₂ are produced with 4.6×10¹⁰ L of isooctane

Explanation:

Let's state the combustion reaction:

C₈H₁₈  +  25/2O₂  →   8CO₂  +  9H₂O

Let's calculate the mass of isooctane that reacts.

Density = Mass / Volume

Density . Volume = Mass

First of all, let's convert the volume in L to mL, so we can use density.

4.6×10¹⁰ L . 1000 mL / 1L = 4.6×10¹³ mL

0.792 g/mL . 4.6×10¹³ mL = 3.64 ×10¹³ g

This mass of isooctane reacts to produce CO₂ and water, so let's determine the moles of reaction

3.64 ×10¹³ g . 1mol / 114 g = 3.19×10¹¹ mol

Ratio is 1:8 so 1 mol of isooctane can produce 8 moles of dioxide

Therefore 3.19×10¹¹ mol would produce (3.19×10¹¹ mol . 8)  = 2.55×10¹² moles of CO₂

Now, we can determine the mass of produced CO₂ by multipling:

moles . molar mass

2.55×10¹² mol . 44 g/mol = 1.12×10¹⁴ g of CO₂

If we convert to kg  1.12×10¹⁴ g / 1000 =  1.12×10¹¹ kg

Answer: The net ionic equation is written below.

Explanation:

Net ionic equation of any reaction does not include any spectator ions.

Spectator ions are defined as the ions which does not get involved in a chemical equation. They are found on both the sides of the chemical reaction when it is present in ionic form.

The chemical equation for the reaction of sodium carbonate and nickel (II) chloride is given as:

[tex]Na_2CO_3(aq.)+NiCl_2(aq.)\rightarrow 2NaCl(aq.)+NiCO_3(s)[/tex]

Ionic form of the above equation follows:

[tex]2Na^{+}(aq.)+CO_3^{2-}(aq.)+Ni^{2+}(aq.)+2Cl^{-}(aq.)\rightarrow NiCO_3(s)+2Na^+(aq.)+2Cl^-(aq.)[/tex]

As, sodium and chloride ions are present on both the sides of the reaction. Thus, it will not be present in the net ionic equation and are spectator ions.

The net ionic equation for the above reaction follows:

[tex]Ni^{2+}(aq.)+CO_3^{2-}(aq.)\rightarrow NiCO_3(s)[/tex]

Hence, the net ionic equation is written above.

The balanced molecular equation for the reaction of Na2CO3 and NiCl2 is Na2CO3(aq) + NiCl2(aq) ⟶ 2NaCl(aq) + NiCO3(s). The balanced net ionic equation, excluding the spectator ions, is CO32-(aq) + Ni2+(aq) ⟶ NiCO3(s).

The reaction between aqueous sodium carbonate (Na2CO3) and aqueous nickel(II) chloride (NiCl2) results in the formation of sodium chloride (NaCl) and nickel carbonate (NiCO3). Represented as molecular equation, it looks like this: Na2CO3(aq) + NiCl2(aq) ⟶ 2NaCl(aq) + NiCO3(s).

For the net ionic reaction, we exclude the spectator ions, which in this case are Na+ and Cl-. These ions remain unreacted in the solution. Therefore, the net ionic equation will be: CO32-(aq) + Ni2+(aq) ⟶ NiCO3(s).

https://brainly.com/question/34137415

#SPJ3

Answer:

3030.2 g/mol is the molar mass for our polymer

Explanation:

Formula for Osmotic pressure → π = M . R .T

where π is pressure (atm)

M is molarity mol/L

R, the Universal Gases Constant (0.082 L.atm/mol.K)

T, Absolute T° (T°C + 273)

25°C + 273 = 298 K

Let's replace the values

0.174 atm = M . 0.082l.atm/mol.K . 298K

0.174 atm / (0.082l.atm/mol.K . 298K) = M

7.12×10⁻³ mol/L

As molarity is mol/L, and we have the volume of solution (in mL we must convert to L) we can find out the moles of our polymer that corresponds to the mass we used.

260mL . 1L/1000mL = 0.260L

7.12×10⁻³ mol/L = mol / 0.260L

7.12×10⁻³ mol . 0.260 = mol → 1.85×10⁻³

These moles refers to te 5.61 g of solute, to if we want to determine the molar mass, we should do:

g/mol → 5.61 g / 1.85×10⁻³ mol = 3030.2 g/mol

Final answer:

The molar mass of the polymer is approximately 28.93 g/mol.

Explanation:

To calculate the molar mass of the polymer, we can use the osmotic pressure formula:

π = MRT

Where π is the osmotic pressure, M is the molar mass, R is the ideal gas constant, and T is the temperature in Kelvin.

Given that the osmotic pressure is 0.174 atm and the temperature is 25.0 °C (which needs to be converted to Kelvin), we can rearrange the formula to solve for M:

M = π / (RT)

Now we can plug in the values:

M = 0.174 atm / (0.0821 L·atm/mol·K * 298 K)

M = 0.00706 mol / 0.024438 L

M = 28.93 g/mol

Therefore, the molar mass of the polymer is approximately 28.93 g/mol.

Answer:

The net work produced = -36737.52 J

The efficiency of the cycle = 72.2%

Explanation:

Given that :

The temperature of the hot reservoir [tex](T__H})[/tex] = 800 °C = (800+273)K

The temperature of the cold reservoir [tex](T__C})[/tex] = 25 °C (25+273)K

Pressure [tex](P__A})[/tex] =  0.2 bar

Pressure [tex](P_B})[/tex] =  60 bar

Rate constant (R) = 8.314

Determination of the efficiency of the cycle (η) is given by the formula:

(η) = [tex]1-\frac{T__C}{T__H}[/tex]

   = 1  - [tex]\frac{(800+273)K}{(25+273)K}[/tex]

   = 0.722

   = 72.2 %

∴ The efficiency of the cycle = 72.2 %

However, the heat given along the initial hot isothermal path [tex](Q__H})[/tex] is equal to the work done which is given by the equation;

[tex]Q__H}=nRT__H}In\frac{V_b}{V_a}[/tex]

[tex]Q__H}=nRT__H}In\frac{P_a}{P_b}[/tex]

substituting our data from the given parameters above; we have:

      [tex]= 1 * 8.314 * (800+273) *In (\frac{0.2}{60} )[/tex]

      = -50882.99 J

To determine the net work produced; we have:

[tex]W_{net}[/tex] = η[tex]Q__H[/tex]

       = 0.722 × (-50882.99 J)

       = -36737.52 J

∴ The net work produced = -36737.52 J

The net work produced and the efficiency of the cycle is:  [tex]{W_{net} = 111814.54 \text{ J}}[/tex], [tex]{\eta = 72.2\%}[/tex]

To solve this problem, we will use the principles of thermodynamics and the characteristics of a Carnot cycle. The net work produced by a Carnot cycle and its efficiency can be determined using the temperatures of the hot and cold reservoirs and the ideal gas law.

First, let's convert the temperatures from Celsius to Kelvin, which is necessary for the calculations:

- The temperature of the hot reservoir, [tex]\( T_{hot} \), is \( 800^\circ C + 273.15 = 1073.15 K \).[/tex]

- The temperature of the cold reservoir, [tex]\( T_{cold} \), is \( 25^\circ C + 273.15 = 298.15 K \).[/tex]

The efficiency of a Carnot cycle is given by the formula:

[tex]\[ \eta = 1 - \frac{T_{cold}}{T_{hot}} \][/tex]

Substituting the temperatures in Kelvin:

[tex]\[ \eta = 1 - \frac{298.15 K}{1073.15 K} \][/tex]

[tex]\[ \eta = 1 - 0.278 \][/tex]

[tex]\[ \eta = 0.722 \text{ or } 72.2\% \][/tex]

The net work produced in a Carnot cycle can also be expressed in terms of the heat added and the efficiency:

[tex]\[ W_{net} = Q_{in} \cdot \eta \][/tex]

where [tex]\( Q_{in} \)[/tex] is the heat added from the hot reservoir.

Since the process involves one mole of an ideal gas, we can use the specific heat capacity at constant volume, [tex]\( C_v \)[/tex], to find [tex]\( Q_{in} \)[/tex]:

[tex]\[ Q_{in} = n \cdot C_v \cdot (T_{hot} - T_{cold}) \][/tex]

For an ideal diatomic gas, [tex]\( C_v = \frac{5}{2}R \)[/tex], where [tex]\( R \)[/tex] is the ideal gas constant [tex](8.314 J/(mol\cdot K)).[/tex]

Substituting the values:

[tex]\[ Q_{in} = 1 \text{ mol} \cdot \frac{5}{2} \cdot 8.314 \text{ J/(mol\cdot K)} \cdot (1073.15 K - 298.15 K) \][/tex]

[tex]\[ Q_{in} = \frac{5}{2} \cdot 8.314 \text{ J/(mol\cdot K)} \cdot 775 \text{ K} \] \[ Q_{in} = 20 \text{ mol} \cdot 8.314 \text{ J/(mol\cdot K)} \cdot 775 \text{ K} \] \[ Q_{in} = 155027 \text{ J} \][/tex]

Now, we can calculate the net work produced:

[tex]\[ W_{net} = Q_{in} \cdot \eta \] \[ W_{net} = 155027 \text{ J} \cdot 0.722 \] \[ W_{net} = 111814.54 \text{ J} \][/tex]

Therefore, the net work produced by the Carnot cycle is approximately [tex]\( 111814.54 \text{ J} \)[/tex] and the efficiency of the cycle is [tex]\( 72.2\% \).[/tex]

The final answer for the net work produced and the efficiency of the cycle is: [tex]\[ \boxed{W_{net} = 111814.54 \text{ J}} \][/tex], [tex]\[ \boxed{\eta = 72.2\%} \][/tex]

The answer is: [tex]\eta = 72.2\%.[/tex]

Answer:

[tex]4.56 x 10^{-19}J[/tex]

Explanation:

Electromagnetic radiations consist of quanta of energy called photons which have energy, E which is equal to:

E = hν.....................................(1)

where h is the Planck's constant which is [tex]6.626 x10^{-34}Js[/tex] and ν is the frequency of light radiation.

But ν = c/λ ....................................(2)

Putting equation (2) into (1), we have

E = hc/λ..........................................(3)

c is the speed of light (c =[tex]3 x 10^{8}m/s[/tex]) while λ is the wavelength of light.

Wavelength λ = 436nm = [tex]436 x 10^{-9}m[/tex]

Therefore the energy E of one photon of this light, using equation (3) is

[tex]E=\frac{6.626 x 10^{-34} x3 x10^{8} }{436 x 10^{-9} } = 4.56 x 10^{-19} J[/tex]

The energy of one photon of light with a wavelength of 436 nm is 4.546 × 10^-19 J.

To calculate the energy of one photon, we can use the equation E = hc/λ, where E is the energy, h is Planck's constant (6.626 × 10-34 J·s), c is the speed of light (3.00 × 108 m/s), and λ is the wavelength.

Plugging in the given wavelength of 436 nm (which is equal to 4.36 × 10-7 m) into the equation, we have:

E = (6.626 × 10-34 J·s)(3.00 × 108 m/s) / (4.36 × 10-7 m) = 4.546 × 10-19 J

Therefore, the energy of one photon of light with a wavelength of 436 nm is 4.546 × 10-19 J.

Answer:

TS (total solid, mg/L) = 57,174 mg/L

VS (volatile solid, mg/L) = 24,088 mg/L

Explanation:

First step to solve this problem is to know data and questions:

Data:

Sample volume = 50 mL

Sample weight = 50.1 g

P1 (weight empty crucible) = 17.1234 g

P2 (weight after drying a 103º in oven) = 19.9821  g

P3 (weight after incinatrion 550º) = 18.7777 g

Questions:

TS = ?  

VS = ?

Formula:

We need to use formulas to calculate total solid (TS) and volatile solid (VS), these are:

[tex]TS =\frac{(P2-P1)*\frac{1,000 mg}{1g} }{Sample volumen (L)}[/tex]

[tex]VS = \frac{(P2-P3)*\frac{1,000 mg}{1g} }{Sample volume (L)}[/tex]

We have to transform mL to L so we will divide mL by 1,000 the sample volume:

[tex]Sample Volumen (L) = 50 mL * \frac{1L}{1,000 mL} = 0.05 L[/tex]

In the formula the value of 1,000 results by the convertion factor to transform grams to miligrams (we have to multiplie by 1,000)

Now we need to replace data on previous formulas and we will get TS and VS expressed in mg/L:

[tex]TS = \frac{(19.9821 g-17.1234g)*\frac{1,000 mg}{1g} }{0.05L} = 57,174mg/L[/tex]

[tex]VS = \frac{(19.9821g-18.7777g)*\frac{1,000mg}{1g} }{0.05L}=24,088 mg/L[/tex]

We divide TS and VS formula by sample volume because the exercise is asking us to express the results in mg/L.

Answer:

This question is incomplete, here is the complete question:

Functional groups confer specific chemical properties to the molecules of which they are a part. In this activity, you will identify which compounds exhibit certain chemical properties as well as examples of those six different compounds.

(a) alcohol: is highly polar and may act as a weak acid (OH)

(b) carboxylic acid: acts as an acid (COOH)

(c) aldehyde: may be a structural isomer of a ketone (C=O)

(d) thiol: forms disulfide bonds (S-H)

(e) amine: acts as a base (NH2)

(f) organic phosphate: contributes negative charge (PO4)

Explanation:

Functional groups are groups of atoms attached to the carbon skeleton of an organic compounds and confers some particular properties. For example:

(a) alcohol: is highly polar and may act as a weak acid (OH)

. In this functional group, oxygen is very electronegative and tend to attract electrons. Water is attracted to this group and because of this, compounds that have OH group will disolve in water. Organic compounds with this functional group are alcohols and carbohydrates for example.  

(b) carboxylic acid: acts as an acid (COOH)

. The two electronegative oxygens of this group keep electrons attached to them and do not share them with tha Hydrogen atom. Because of this, the hydrogen atom can dissociates from the molecule, giving an acid.  

(c) aldehyde: may be a structural isomer of a ketone (C=O)

. As in the case of -OH group, oxygen of this group is very electronegative. When the group is presents at the end of the carbon skeleton we cal it aldehyde, while when it is in another part of carbon structure we call it ketone.  

(d) thiol: forms disulfide bonds (S-H)

. When two thiol groups (S-H) are oxidazed, losting their hydrogen atoms, they form disulfide bonds that gives stability to the molecules that contains them. An example of this is found in proteins when two aminoacids with thiol groups (cysteine, for example) interact and form disulfide bonds that stabilizes the protein.

(e) amine: acts as a base (NH2)

.  The nitrogen atom of this groups is slightly electronegative so it tends to pick up hydrogen ions from the surroundings given rise to a base. This group i typicall of aminoacids  (glycine, for example)  

(f) organic phosphate: contributes negative charge (PO4). In this group, phosphorus easily changes its oxydation state, thus, giving rise to a compound with electronegative oxygens. An important biological molecule that contains this group is ATP    

Functional groups are important components of organic molecules, conferring specific chemical properties to the molecules. Common functional groups include hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl. The presence of these groups can greatly affect the chemical properties and function of the molecule.

Functional groups are vital components of organic molecules, conferring specific chemical properties upon the molecules in which they occur. These groups are attached to a 'carbon backbone' of chains or rings of carbon atoms, with possible substitutions of elements like nitrogen or oxygen. For example, the C-Cl portion of the chloroethane molecule is a functional group imparting specific chemical reactivity. The nature of the functional groups in an organic molecule are significant determinants of its chemical properties.

Functional groups take part in particular chemical reactions. Some of the important functional groups include hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl. These functional groups may attach to the carbon backbone at various points along the chain or ring structure. The presence of these groups majorly contributes to the varying chemical properties of different organic molecules and their functions in living organisms.

For example, carboxyl groups (-COOH) confer acidic properties to a molecule, while amine groups (NH₂) make a molecule more basic. Molecules with identical molecular formulas may have different structures due to variations in their functional groups, morphing into different types of isomers.

https://brainly.com/question/36437639

#SPJ12

Answer:

Macroscopic domain: Boiling point elevation, Henry's law, molarity, osmosis.

Microscopic domain: Hydrogen bond, ion-dipole attraction, nonelectrolyte, solvated ion.

Explanation:

A solution is composed of a solute (in high quantity) and one or more solute, which are dissolved in it. The properties of the solution can be characterized and measured in the macroscopic domain, or the microscopic domain when it's observed in the interactions with the molecules.

Boiling point elevation: It happens because the nonvolatile solvents interact with the solute, and so it will be difficult to boil it. The boiling point is a property of all the substance, and so, it can be noticed in the macroscopic domain.

Henry's law: States that the solubilization of a gas in a liquid depends on the partial pressure of the gas and by a proportional constant. Thus, the solubility of a gas is how much moles are dissolved in the volume of the solution, and so it's part of the macroscopic domain.

Hydrogen bond: It's an intermolecular interaction that happens in polar molecules that have bonds between hydrogen and a high electronegative element (N, O, or F). So, it's part of the microscopic domain.

Ion-dipole attraction: It's also an interaction that happens between an ion and a polar compound, so it's part of the microscopic domain.

Molarity: It represents how much moles of the solute is dissolved in the solution, so it's part of the macroscopic domain.

Nonelectrolyte: An electrolyte compound is the one which dissociates or ionizes, in the solvent, and because of that the solution can conduct electricity. A nonelectrolyte doesn't have this property. Because it depends on how the ions and molecules behave in solution, it's part of the microscopic domain.

Osmosis: Is the property of the solvent to go through a membrane from a side with fewer solutes (less concentrated) to another with more solute (high concentrated). So, it depends on the total amount of the solute, and so it's part of the macroscopic domain.

Solvated ion: A solvated ion is an ion that is surrounded by another ion, or by molecules, such water. So, it's part of the microscopic domain.

Answer: The volume of the gas also gets double when number of moles are doubled.

Explanation:

The relationship of number of moles and volume at constant temperature and pressure was given by Avogadro's law. This law states that volume is directly proportional to number of moles at constant temperature and pressure.

The equation used to calculate number of moles is given by:

[tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex]

where,

[tex]V_1\text{ and }n_1[/tex] are the initial volume and number of moles

[tex]V_2\text{ and }n_2[/tex] are the final volume and number of moles

We are given:

[tex]n_2=2n_1[/tex]

Putting values in above equation, we get:

[tex]\frac{V_1}{n_1}=\frac{V_2}{2n_1}\\\\V_2=\frac{2n_2\times V_1}{n_1}=2V_2[/tex]

Hence, the volume of the gas also gets double when number of moles are doubled.

Final answer:

Doubling the number of moles of a gas while keeping temperature and pressure constant will double the volume of the gas, in accordance with Avogadro's law.

Explanation:

When we double the number of moles of gas while keeping the temperature and pressure constant, according to Avogadro's law, the volume of the gas also doubles. This is because Avogadro's law states that at constant temperature and pressure, the volume of a gas is directly proportional to the number of moles of the gas. Therefore, if the amount of gas is doubled, the volume also doubles, assuming the gas behaves ideally.

Answer:

d.All of the above are correct.

Explanation:

The curve of demand moves left or right continuously. Income, patterns and preferences, related products prices as well as the population size and composition are the key factors causing demand change.

The demand curve for gasoline can shift in response to changes in price, expected future price, and the number of sellers. Option b is the correct option.

The correct answer is d. All of the above are correct. The demand curve for gasoline reflects the relationship between the price and quantity demanded, so a change in the price of gasoline can shift the curve. The expected future price of gasoline can also influence current demand, as consumers may adjust their purchasing behavior based on their expectations. Additionally, the number of sellers of gasoline can impact market supply, which in turn affects the equilibrium price and quantity.

https://brainly.com/question/33438436

#SPJ11

Answer: The molality of potassium hydroxide solution is 0.608 m

Explanation:

We are given:

3.301 mass % of potassium hydroxide solution.

This means that 3.301 grams of potassium hydroxide is present in 100 grams of solution

Mass of solvent = Mass of solution - Mass of solute (KOH)

Mass of solvent = (100 - 3.301) g = 96.699 g

To calculate the molality of solution, we use the equation:

[tex]\text{Molality}=\frac{m_{solute}\times 1000}{M_{solute}\times W_{solvent}\text{ (in grams})}[/tex]

Where,

[tex]m_{solute}[/tex] = Given mass of solute (KOH) = 3.301 g

[tex]M_{solute}[/tex] = Molar mass of solute (KOH) = 56.1 g/mol

[tex]W_{solvent}[/tex] = Mass of solvent = 96.699 g

Putting values in above equation, we get:

[tex]\text{Molality of KOH}=\frac{3.301\times 1000}{56.1\times 96.699}\\\\\text{Molality of KOH}=0.608m[/tex]

Hence, the molality of potassium hydroxide solution is 0.608 m

Answer : The formula of a sulfur molecule in carbon disulfide is, [tex]S_8[/tex]

Explanation :

Formula used for Elevation in boiling point :

[tex]\Delta T_b=i\times k_b\times m[/tex]

or,

[tex]\Delta T_b=i\times k_b\times \frac{w_2\times 1000}{M_2\times w_1}[/tex]

where,

[tex]\Delta T_b[/tex] = boiling point of elevation = [tex]0.107^oC[/tex]

[tex]k_b[/tex] = boiling point constant  of carbon disulfide = [tex]2.43^oC/m[/tex]

m = molality

i = Van't Hoff factor = 1 (for non-electrolyte

[tex]w_2[/tex] = mass of solute (sulfur sample) = 0.210 g

[tex]w_1[/tex] = mass of solvent (carbon disulfide) = 17.8 g

[tex]M_2[/tex] = molar mass of solute (sulfur sample) = ?

Now put all the given values in the above formula, we get:

[tex]0.107^oC=1\times (2.43^oC/m)\times \frac{(0.210g)\times 1000}{M_2\times (17.8g)}[/tex]

[tex]M_2=267.93g/mol[/tex]

The molar mass of sulfur sample is, 267.93 g/mol

Now we have to determine the formula of a sulfur molecule in carbon disulfide.

Let the compound of sulfur be, [tex]S_n[/tex]

Molar mass of [tex]S_n[/tex]  = n × Molar mass of S

267.93 g/mol = n × 32  g/mol

n = 8

Thus, the formula of a sulfur molecule in carbon disulfide is, [tex]S_8[/tex]

Question in incomplete, complete question is:

Technetium (Tc; Z = 43) is a synthetic element used as a radioactive tracer in medical studies. A Tc atom emits a beta particle (electron) with a kinetic energy (Ek) of [tex]4.71\times 10^{-15}J[/tex] . What is the de Broglie wavelength of this electron (Ek = ½mv²)?

Answer:

[tex] 6.762\times 10^{-12} m[/tex] is the de Broglie wavelength of this electron.

Explanation:

To calculate the wavelength of a particle, we use the equation given by De-Broglie's wavelength, which is:

[tex]\lambda=\frac{h}{\sqrt{2mE_k}}[/tex]

where,

= De-Broglie's wavelength = ?

h = Planck's constant = [tex]6.624\times 10^{-34}Js[/tex]

m = mass of beta particle = [tex] 9.1094\times 10^{-31} kg[/tex]

[tex]E_k[/tex] = kinetic energy of the particle = [tex]4.71\times 10^{-15}J[/tex]

Putting values in above equation, we get:

[tex]\lambda =\frac{6.624\times 10^{-34}Js}{\sqrt{2\times 9.1094\times 10^{-31} kg\times 4.71\times 10^{-15}J}}[/tex]

[tex]\lambda = 6.762\times 10^{-12} m[/tex]

[tex] 6.762\times 10^{-12} m[/tex] is the de Broglie wavelength of this electron.

Answer:

Li, N, Ni, Te

Explanation:

First let us consider the number of unpaired electrons in each of the given atoms.

Li-1

N-3

Ni-2

Te-2

For an atom to be paramagnetic, it must possess at least one unpaired electron in its valence shell. Ba and Hg are not paramagnetic because all electrons in their outermost shells are spin paired.

The more the number of unpaired electrons in the outermost shell of an atom, the greater its paramagnetic behavior.

Whether an atom is paramagnetic depends on the presence of unpaired electrons in its ground state electron configuration. The number of unpaired electrons determines the strength of its paramagnetism. For example, a nitrogen atom has three unpaired electrons leading it to exhibit paramagnetism.

The question has asked about the paramagnetism and unpaired electrons present in an atom according to the quantum mechanical model. However, the specific atom is not given in the question. In general, if an atom has unpaired electrons in its ground state electron configuration, it will exhibit paramagnetic behavior. The number of unpaired electrons will determine the strength of this effect.

For example, let's consider an atom of nitrogen. According to quantum mechanics, a nitrogen atom has 7 electrons. In its ground state, it has two electrons in 1s orbital, two in 2s, and three in 2p orbitals. Only the three 2p electrons are unpaired. Therefore, a nitrogen atom exhibits paramagnetism due to these three unpaired electrons.

Likewise, you can determine the magnetic properties of any atom by examining its electron configuration and identifying the number of unpaired electrons.

https://brainly.com/question/33301070

#SPJ12

Final answer:

In the given reaction, 100 grams of calcium carbonate decomposed to form 56 grams of calcium oxide and 44 grams of carbon dioxide. This observation is in agreement with the law of conservation of mass.

Explanation:

The given reaction: CaCO3 → CaO + CO2

According to the reaction, 1 mole of CaCO3 decomposes to form 1 mole of CaO and 1 mole of CO2. The molar mass of CaCO3 is 100.09 g/mol. Therefore, the molar mass of CaO and CO2 should be the same, which is 56.08 g/mol. The given mass of CaCO3 is 100 g, so the moles of CaCO3 are:

(100 g / 100.09 g/mol) = 0.999 mol

Since 1 mole of CaCO3 decomposes to form 1 mole of CaO and 1 mole of CO2, the moles of CaO produced will be:

0.999 mol

The molar mass of CaO is 56.08 g/mol, so the mass of CaO produced will be:

(0.999 mol) * (56.08 g/mol) = 55.88 g

Therefore, the observed mass of CaO produced is 56 g, which is in agreement with the law of conservation of mass.

The reaction CaCO₃ → CaO + CO₂ illustrates 5. the Law of Conservation of Matter

The given reaction CaCO₃ → CaO + CO₂ demonstrates the Law of Conservation of Matter.

The combined mass of the products is 10 grams, which equals the mass of the reactant, thereby supporting the Law of Conservation of Matter.

Correct question is: In the reaction CaCO₃ → CaO + CO₂ 100 grams of calcium carbonate (CaCO₃) is observed to decompose upon heating into 56 grams of calcium oxide (CaO) and 44 grams of carbon dioxide (CO₂). This is an illustration of
1. the Law of Gravity
2. the Law of Conservation of Energy
3. the Law of Multiple Proportions
4. the conversion of matter into energy
5. thc Law of Conservation of Matter

The aldehyde group changes to ether group.

In the straight chain glucose molecule, there's the 6 carbon atoms attached with each other where there are several hydrogen and hydroxyl radicals attached. The C1 of glucose contains the aldehyde group and the C5 is the most reactive atom of glucose. In a solution, the lone pair of the oxygen atom of hydroxyl group of C5 attacks the electrophilic centre of C1, forming a carbon oxygen ether bond. This bond makes the double bonded oxygen weaker and one of the bond breaks forming oxygen radicle, which then attracts the hydrogen radicle emitted by the ether oxygen to form a hydroxyl group. This is how the ring structure forms in a solution.

Thus, the aldehyde group of glucose changes to ether group.

Answer:

Percentage abundance of 121 Sb is = 57.2 %

Percentage abundance of 123 Sb is = 42.8 %

Explanation:

The formula for the calculation of the average atomic mass is:

[tex]Average\ atomic\ mass=(\frac {\%\ of\ the\ first\ isotope}{100}\times {Mass\ of\ the\ first\ isotope})+(\frac {\%\ of\ the\ second\ isotope}{100}\times {Mass\ of\ the\ second\ isotope})[/tex]

Given that:

Since the element has only 2 isotopes, so the let the percentage of first be x and the second is 100 -x.

For first isotope, 121 Sb :

% = x %

Mass = 120.9038 u

For second isotope, 123 Sb:

% = 100  - x  

Mass = 122.9042 u

Given, Average Mass = 121.7601 u

Thus,  

[tex]121.7601=\frac{x}{100}\times 120.9038+\frac{100-x}{100}\times 122.9042[/tex]

[tex]120.9038x+122.9042\left(100-x\right)=12176.01[/tex]

Solving for x, we get that:

x = 57.2 %

Thus, percentage abundance of 121 Sb is = 57.2 %

percentage abundance of 123 Sb is = 100 - 57.2 %  = 42.8 %

Considering the definition of atomic mass, isotopes and atomic mass of an element,

First of all, the atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus of a chemical element.

The same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element.

On the other hand, the atomic mass of an element is the weighted average mass of its natural isotopes. In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.

In this case, 121 Sb and 123 Sb are the naturally isotopes of antimony. 121 Sb has an atomic mass of 120.9038 u , and 123 Sb has an atomic mass of 122.9042 u.

Being the average atomic mass of antomony 121.7601 u, the average mass of antimony can be calculated as:

average mass of antimony= percent natural abundance of 121 Sb× atomic mass of 121 Sb + percent natural abundance of 123 Sb× atomic mass of 123 Sb

Being percent natural abundance of 123 Sb= 1 - percent natural abundance of 121 Sb, and substituting the corresponding values, you get:

121.7601 u= percent natural abundance of 121 Sb× 120.9038 u + (1 - percent natural abundance of 121 Sb)× 122.9042 u

Solving:

121.7601 u= percent natural abundance of 121 Sb× 120.9038 u + 1× 122.9042 u - percent natural abundance of 121 Sb× 122.9042 u

121.7601 u= percent natural abundance of 121 Sb× (-2.0004 u) + 122.9042 u

121.7601 u - 122.9042 u= percent natural abundance of 121 Sb× (-2.0004 u)

-1.1441= percent natural abundance of 121 Sb× (-2.0004 u)

-1.1441÷ (-2.0004 u) = percent natural abundance of 121 Sb

0.5719 ×100 % = percent natural abundance of 121 Sb

57.19% = percent natural abundance of 121 Sb

So:

percent natural abundance of 123 Sb= 1 - percent natural abundance of 121 Sb

percent natural abundance of 123 Sb= 1 - 0.5719

percent natural abundance of 123 Sb= 0.4281

percent natural abundance of 123 Sb= 0.4281× 100

percent natural abundance of 123 Sb= 42.81%

Finally, the percent natural abundance of 121 Sb is 57.19% and the percent natural abundance of 123 Sb is 42.81%

Learn more about isotopes and Atomic mass of an element:

brainly.com/question/14403750?referrer=searchResults

brainly.com/question/10043246?referrer=searchResults

brainly.com/question/15553207?referrer=searchResults

Answer:

V NH3(g) = 1.833 L

Explanation:

balanced reaction:

assuming STP:

∴ V N2(g) = 3.52 L

∴ V H2(g) = 2.75 L

ideal gas:

∴ moles N2(g) = PV/RT

⇒ mol N2(g) = (1 atm)(3.52 L)/(0.082 atm.L/K.mol)(298 K)

⇒ mol N2(g) = 0.144 mol

∴ moles H2(g) = PV/RT

⇒ mol H2(g) = (1)(2.75)/(0.082)(298) = 0.113 mol (limit reagent)

∴ moles NH3(g) = (0.113 moles H2(g))(2 moles NH3 / 3 mol H2) = 0.075 mol

∴ V NH3(g) = RTn/P

⇒ V NH3(g) = ((0.082 atm.L/K.mol)(298 K)(0.075 mol))/(1 atm)

⇒ V NH3(g) = 1.833 L

Final answer:

From 3.52 L of nitrogen and 2.75 L of hydrogen, 1.83 L of ammonia can be produced, considering hydrogen as the limiting reactant based on the stoichiometry of the balanced chemical equation.

Explanation:

The question involves a stoichiometric calculation based on the reaction between hydrogen and nitrogen gases to form ammonia. Given the balanced chemical equation N2(g) + 3H2(g) → 2NH3(g), we can determine how many litres of ammonia gas could form from 3.52 L of nitrogen gas and 2.75 L of hydrogen gas, assuming all gases are at the same temperature and pressure. Since the reaction consumes nitrogen and hydrogen in a 1:3 ratio to produce ammonia in a 2 moles product per 1 mole of nitrogen ratio, we first identify the limiting reactant. Here, hydrogen gas (H2) is the limiting reactant because we need 3 volumes of hydrogen for every volume of nitrogen, but we have less than that (2.75 L instead of 3.52*3 L). The amount of ammonia produced is therefore determined by the amount of hydrogen available. Since 3 volumes of H2 produce 2 volumes of NH3, 2.75 L of H2 would produce (2.75 L * (2/3)) = 1.83 L of NH3.