Draw the Lewis structure (including all lone pair electrons and any formal charges) for one of the four possible isomers of C3H9N.

Answer:

155 A

Explanation:

Given data

We can determine the magnitude of the electric current (I) using the following expression.

I = Q / t

I = 93.0 C / 0.601 s

I = 155 C/s

I = 155 A

The magnitude of the electric current is 155 Ampere.

Final answer:

The general expression for the ionization energy of any one-electron species is IE = -13.6/n^2 eV. The ionization energy of B⁴⁺ is approximately -13.6/2^2 eV. The minimum wavelength required to remove the electron from the n = 3 level of He⁺ and from the n = 2 level of Be³⁺ can be calculated using the equation E = hc/λ.

Explanation:

(a) The general expression for the ionization energy of any one-electron species can be written as: IE = -13.6/n^2 eV, where n is the principal quantum number. This expression indicates that the ionization energy decreases as the principal quantum number increases.

(b) To calculate the ionization energy of B⁴⁺, we need to find the value of n in the expression IE = -13.6/n^2 eV. Since B⁴⁺ has 5 protons in its nucleus, we can use the formula Z = 1.33n^2 to determine the value of n for B⁴⁺. Plugging in Z = 5, we get n ≈ 2.14. Therefore, the ionization energy of B⁴⁺ is approximately -13.6/2^2 eV.

(c) The minimum wavelength required to remove the electron from the n = 3 level of He⁺ can be found using the equation E = hc/λ, where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength. We can calculate the energy using the ionization energy of He⁺ from the given information, and then rearrange the equation to solve for λ.

(d) Similarly, we can use the same equation and rearrange it to solve for λ in order to find the minimum wavelength required to remove the electron from the n = 2 level of Be³⁺.

Answer:

NO, they are not the same compound

Explanation:

Given that;

Compound A melts at  220.5 °C - 222.1 °C;      &

Compound B melts at   221.2 °C - 223.4 °C

It is seen from above that there is little difference in the melting point of Compound A and B. This little difference can be as a result of factors associated when carrying the melting process or because different methods were employed in the establishing their melting points.

Also, we were told that when they were both mixed together ,  the mixture of compound A and B melts at 216.4 °C  - 224.6 °C.

This statement has largely indicated that both compounds are not the same at all, because if they were, the mixture of compound A and B melting point must be identical to one of the individual compound's melting point either from compound A or from compound B.

Answer:

The mass of AlBr3 is 24.5 grams

Explanation:

Step 1: Data given

Mass of aluminium = 5.0 grams

Mass of bromine = 22.0 grams

Molar mass of aluminium = 26.98 g/mol

Molar mass of br2= 159.8 g/mol

Step 2: The balancced equation

2 Al + 3 Br2 → 2 AlBr3

Step 3: Calculate moles Al

Moles Al = mass Al / molar mass Al

Moles Al = 5.0 grams / 26.98 g/mol

Moles Al = 0.185 moles

Step 4: Calculate moles Br

Moles Br = 22.0 grams / 159.8 g/mol

Moles Br = 0.138 moles

Step 5: Calculate limiting reactant

For 2 moles Al we need 3 moles Br2 to produce 2 moles AlBr3

Br2 is the limiting reactant. It will completely be consumed (0.0313 moles)

Al is in excess. There will react 2/3*0.138 = 0.092 moles

There will remain 0.185- 0.092 = 0.093 moles Al

Step 6: Calculate moles AlBr3

For 2 moles Al we need 3 moles Br2 to produce 2 moles AlBr3

For 0.0313 moles Br2 we'll have 2/3*0.138 = 0.092 moles AlBr3

Step 7: Calculate mass AlBr3

Mass AlBr3 = moles * molar mass

Mass AlBr3 = 0.092 moles * 266.69 g/mol

Mass AlBr3 = 24.5 grams

The mass of AlBr3 is 24.5 grams

Final answer:

To find out the mass of aluminum bromide produced, we calculate the moles of aluminum and bromine, identify the limiting reactant, and then calculate the mass of the product from the moles of the limiting reactant using the stoichiometry of the reaction.

Explanation:

The question involves a stoichiometry calculation to determine the amount of product formed from a chemical reaction between aluminum and bromine (2 Al + 3 Br2 → 2 AlBr3). To solve this, we need to identify the limiting reactant and use it to calculate the mass of the product formed. First, the moles of each reactant is determined using their molar masses. Next, the stoichiometry of the balanced chemical equation is used to find the moles of product that can be formed from the limiting reactant.

Then, the moles of product are converted to grams using the molar mass of the product. This step-by-step process will lead us to find the mass of aluminum bromide (AlBr3) that can be produced.

Explanation:

Chlorine atom has an atomic number of 17

Electronic configuration

Cl = 1s2 2s2 2p6 3s2 3p5

Cl- = 1s2 2s2 2p6 3s2 3p6

Soduim atom has an atomic number of 11

Electronic configuration

Na = 1s2 2s2 2p6 3s1

Na+ = 1s2 2s2 2p6

Calcium atom has an atomic number of 20

Electronic configuration

Ca = 1s2 2s2 2p6 3s2 3p6 4s2

Ca2+ = 1s2 2s2 2p6 3s2 3p6

The monatomic ions most likely formed by Cl, Na, and Ca are Cl-, Na+, and Ca2+, respectively.

(a) The most likely monatomic ion formed by Chlorine (Cl) is Cl-. The electronic configuration of Cl is 1s2 2s2 2p6 3s2 3p5. By gaining one electron, Cl achieves a stable octet and becomes a chloride ion (Cl-).

(b) The most likely monatomic ion formed by Sodium (Na) is Na+. The electronic configuration of Na is 1s2 2s2 2p6 3s1. By losing one electron, Na achieves a stable octet and becomes a sodium ion (Na+).

(c) The most likely monatomic ion formed by Calcium (Ca) is Ca2+. The electronic configuration of Ca is 1s2 2s2 2p6 3s2 3p6 4s2. By losing two electrons, Ca achieves a stable octet and becomes a calcium ion (Ca2+).

https://brainly.com/question/36640155

#SPJ3

Explanation:

Ethanethiol is an organosulphur compound which had an alkyl group(CnH2n+1) and a -thiol group (-SH). A thiol group like an hydroxyl group has its Oxygen replaced with sulphur.

Ethanethiol shows little association of its -SH group with the water molecules by hydrogen bonding; both with water molecules and among themselves. Hence why they are less soluble in water or slightly soluble in water.

Ethanol is an organic compound which the general formula of CnH2n+1OH. Ethanol is soluble in water because of the reaction of the -OH group with the water molecules to form hydrogen bonds.

Note that as the alkyl chain increases, Solubility decreases. This is because the alkyl chain forms the hydrophobic surface of the molecule due to its non-interaction of the water molecules to form hydrogen bond.

Ethanol is completely miscible with water due to its polar nature and ability to form strong hydrogen bonds with water. However, ethanethiol is only partially soluble because it forms weaker hydrogen bonds with water due to its less polar sulfhydryl group.

The miscibility and solubility of substances depend on the principle that 'like dissolves like'. This means that polar substances dissolve well in other polar substances, while non-polar substances dissolve well in other non-polar substances. Ethanol (C2H5OH) is a polar molecule because it contains a hydroxyl group (-OH), which forms hydrogen bonds with water, another polar substance. This makes ethanol completely miscible with water. On the other hand, ethanethiol (C2H5SH) contains a sulfhydryl group (-SH), which is less polar than the hydroxyl group and forms weaker hydrogen bonds with water. As a result, ethanethiol is only partially soluble in water.

https://brainly.com/question/32327868

#SPJ3

Answer:

90g

Explanation:

We need to find the molar mass of C6H12O6. This is done below:

MM of C6H12O6 = (12x6) + (12x1) + (6x16) = 72 + 12 + 96 = 180g/mol

From the question, we obtained:

Volume = 1L

Molarity = 0.5M

Number of mole = Molarity x Volume

Number of mole = 0.5 x 1 = 0.5mol

Mass conc of C6H12O6 = number of mole x MM = 0.5 x 180 = 90g

To make 1 L of a 0.5 M solution of glucose, one would need 90.078 grams of glucose, based on the molecular weight calculation of C6H12O6.

To calculate how many grams of glucose (C6H12O6) are needed to make 1 L of a 0.5 M solution, you first need to calculate the molar mass of glucose. The molar mass can be found by adding up the atomic masses of all the atoms in one molecule of glucose. The atomic masses are approximately carbon (C) 12.01 g/mol, hydrogen (H) 1.008 g/mol, and oxygen (O) 16.00 g/mol. So, the molar mass of C6H12O6 is:

Next, you use the molarity equation which is:

Molarity (M) = moles of solute / liters of solution

For a 0.5 M solution, you require 0.5 moles of glucose per liter of solution. Using the molar mass calculated earlier, the mass of glucose needed is:

(0.5 moles) ×(180.156 g/mol) = 90.078 g

Therefore, you would need 90.078 g of glucose to make 1 L of a 0.5 M solution of glucose.

Answer:

It remains the same.

Explanation:

From the law of conservation of mass which states that mass in an isolated system can neither be created nor destroyed in a chemical reaction.

According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants, that is total mass of the system is unchanged after the chemical reaction.

So therefore, the reaction of

AgNO3(aq) + HCl(aq) --> AgCl(aq) + HNO3(aq)

the mass of the solution before and after the reaction is unchanged.

Answer:

11552.45 years

Explanation:

Given that:

Half life = 5730 years

[tex]t_{1/2}=\frac{\ln2}{k}[/tex]

Where, k is rate constant

So,  

[tex]k=\frac{\ln2}{t_{1/2}}[/tex]

[tex]k=\frac{\ln2}{5730}\ years^{-1}[/tex]

The rate constant, k = 0.00012 years⁻¹

Using integrated rate law for first order kinetics as:

[tex][A_t]=[A_0]e^{-kt}[/tex]

Where,  

[tex][A_t][/tex] is the concentration at time t

[tex][A_0][/tex] is the initial concentration

Given that:

The rate constant, k = 0.00012 years⁻¹

Initial concentration [tex][A_0][/tex] = 160.0 counts/min

Final concentration [tex][A_t][/tex] = 40.0 counts/min

Time = ?

Applying in the above equation, we get that:-

[tex]40.0=160.0e^{-0.00012\times t}[/tex]

[tex]e^{-0.00012t}=\frac{1}{4}[/tex]

[tex]-0.00012t=\ln \left(\frac{1}{4}\right)[/tex]

[tex]t=11552.45\ years[/tex]

Answer:

(d) Cl, Br, Se

Explanation:

Ionisation energy is defined as the minimum energy required to remove the loosely bound valence electron of a neutral gaseous atom or molecule. It is usually endothermic process.

Accorfing to the trends down the group and across the period:

Ionisation energy generally increases as one moves from left to right in a given period while ionisation generally decreases as one moves from top to bottom in a given group. This is of the magnitude of the effective Nuclear charge and the Number of electron shells.

From the elements above:

Ionisation energy decreases down the group while it increases across the period.

F > C > Be

Li > Na > K

Ar > Cl > Na

Cl > Br > Se

Final answer:

The first ionization energy (IE₁) is the energy required to remove one electron from an atom. The arrangement in decreasing IE₁ for the given sets of elements are: K, Na, Li; Be, C, F; Cl, Na, Ar; and Cl, Br, Se.

Explanation:

The first ionization energy (IE₁) refers to the energy required to remove one electron from an atom in its gaseous state. It is generally observed that ionization energy increases across a period and decreases down a group in the periodic table.

(a) Na, Li, K: These elements are in the same group of alkali metals. Since potassium (K) is located below sodium (Na) and lithium (Li) in the periodic table, K has the lowest ionization energy, followed by Na, and then Li. Therefore, the arrangement in decreasing IE₁ would be: K, Na, Li.

(b) Be, F, C: Beryllium (Be) has a higher ionization energy compared to carbon (C) and fluorine (F) because Be has a smaller atomic radius. Thus, the arrangement in decreasing IE₁ would be: Be, C, F.

(c) Cl, Ar, Na: Chlorine (Cl) has a higher ionization energy compared to argon (Ar) and sodium (Na) because Cl has fewer energy levels and a higher effective nuclear charge. Therefore, the arrangement in decreasing IE₁ would be: Cl, Na, Ar.

(d) Cl, Br, Se: Chlorine (Cl) has the highest ionization energy among the three elements because it requires the most energy to remove an electron. Bromine (Br) has a lower ionization energy compared to chlorine, and selenium (Se) has the lowest ionization energy of the three elements. Therefore, the arrangement in decreasing IE₁ would be: Cl, Br, Se.

Answer: D

Explanation:

Km value is a signature of the enzyme. It is the characteristic feature of a particular enzymes for a specific substrate. Km denotes the affinity of the enzyme for substrate. The lesser the numerical value of Km, the affinity of the enzyme for the substrate is more.

In the velocity x substrate graph in a fixed quantity if enzyme. As substrate concentration is increase, the velocity is also increasing at the initial phase but the curve fatten afterwards. This is because as more substrate is added, all enzymes molecules become saturated. Further increase in substrate cannot make any effect in the reaction velocity.

The maximum velocity is called Vmax. Km is the concentration of substrate that Vmax is half.

The larger the numerical value of Km, the lesser the enzyme binds the substrate

Final answer:

In basic enzyme kinetics, a large Km value signifies that the substrate binds weakly to the enzyme, indicating a lower affinity. A high Km necessitates a higher substrate concentration for effective enzyme activity, making it a critical parameter in enzymology and biotechnology.

Explanation:

In basic enzyme kinetics, a large Km indicates that the substrate binds weakly. The Km value, or the Michaelis constant, provides a measure of the affinity of the enzyme for its substrate. A high Km value suggests that a higher concentration of the substrate is required to achieve half of the maximum rate of reaction (Vmax), indicating a lower affinity of the enzyme for the substrate. Conversely, a low Km value signifies a high affinity, meaning the enzyme can easily bind the substrate even at low concentrations.

Understanding the implications of Km values is essential in enzymology and for designing better enzymes through biotechnology. A larger Km value generally indicates weaker enzyme-substrate interactions, suggesting that the enzyme requires a higher concentration of substrate to be effective. This parameter is crucial in the study of enzyme kinetics, drug design, and understanding metabolic pathways.

The osmotic pressure of this isotonic saline solution at 25 °C, calculated using the formula II = MRT and performing the necessary conversions for temperature and molarity, is approximately 3.86 atm.

The osmotic pressure of an isotonic solution can be calculated using the formula II = MRT. In this case, 'M' represents the molarity of the solution, 'R' is the universal gas constant (0.08206 L atm/mol K), and 'T' is the temperature in Kelvin.

To calculate the osmotic pressure, we need to first convert the temperature from Celsius to Kelvin: 25 degrees Celsius = 298.15 Kelvin. Then, we calculate the molarity of the solution. Here, we know that 0.923 g of NaCl is dissolved in 100 mL of water. The molar mass of NaCl is approximately 58.44 g/mol, so the number of moles of NaCl in the solution is 0.923g / 58.44g/mol = 0.0158 mol. As the volume of the solution is 100 ml or 0.1 L, the molarity 'M' is 0.0158 mol / 0.1 L = 0.158 mol/L.

Now we substitute these values into the formula II = MRT to calculate osmotic pressure. Thus, II = 0.158 mol/L * 0.08206 L atm/mol K * 298.15 K = 3.86 atm.

So, the osmotic pressure of this isotonic saline solution at 25 °C is approximately 3.86 atm.

https://brainly.com/question/37985044

#SPJ12

Explanation:

[tex]E_n=-13.6\times \frac{Z^2}{n^2}eV[/tex]

Formula used for the radius of the [tex]n^{th}[/tex] orbit will be,

[tex]r_n=\frac{n^2\times 52.9}{Z}pm[/tex]   (in pm)

where,

[tex]E_n[/tex] = energy of [tex]n^{th}[/tex] orbit

[tex]r_n[/tex] = radius of [tex]n^{th}[/tex] orbit

n = number of orbit

Z = atomic number

a) The Bohr radius of an electron in the n = 3 orbit of a hydrogen atom.

Z = 1

[tex]r_3=\frac{3^2\times 52.9}{1} pm[/tex]

[tex]r_3=476.1 pm[/tex]

476.1 pm is the Bohr radius of an electron in the n = 3 orbit of a hydrogen atom.

b) The energy (in J) of the atom in part (a)

[tex]E_n=-13.6\times \frac{Z^2}{n^2}eV[/tex]

[tex]E_3=-13.6\times \frac{1^2}{3^2}eV=1.51 eV[/tex]

[tex]1 eV=1.60218\times 10^{-19} Joules[/tex]

[tex]1.51 eV=1.51\times 1.60218\times 10^{-19} Joules=2.4210\times 10^{-19} Joules[/tex]

[tex]2.4210\times 10^{-19} Joules[/tex] is the energy of n = 3 orbit of a hydrogen atom.

c)  The energy of an Li²⁺ ion when its electron is in the n = 3 orbit.

[tex]E_n=-13.6\times \frac{Z^2}{n^2}eV[/tex]

n = 3, Z = 3

[tex]E_3=-13.6\times \frac{3^2}{3^2}eV = -13.6 eV[/tex]

[tex]=-13.6eV = -13.6\times 1.60218\times 10^{-19} Joules=2.179\times 10^{-18} Joules[/tex]

[tex]2.179\times 10^{-18} Joules[/tex] is the energy of an Li²⁺ ion when its electron is in the n = 3 orbit.

d) The difference in answers is due to change value of Z in the formula which is am atomic number of the element..

[tex]E_n=-13.6\times \frac{Z^2}{n^2}eV[/tex]

Following numbers should be dialed:

The display of the P-10 pipette consists of three digits: tens, ones, and tenths. These digits represent different places in the measurement scale. Here's how you would set it for a volume of 3.7 µL:

Tens Section (Leftmost Digit - Tens Place):

Dial in the digit 3. This represents 3 tens of microliters (µL). Essentially, it sets the pipette to 30 µL.

Ones Section (Middle Digit - Ones Place):

Dial in the digit 7. This represents 7 ones of microliters (µL).

Tenths Section (Rightmost Digit - Tenths Place):

Dial in the digit 0. This represents 0.1 µL. However, for your measurement of 3.7 µL, you don't need to adjust this digit, as you don't have any tenths to add.

Putting it all together:

Tens: 3 (30 µL)

Ones: 7 (7 µL)

Tenths: 0 (0.1 µL, but not needed in this case)

So, with the tens set to 3 and the ones set to 7, you have dialed in a total volume of 37 µL.

Learn more about pipette, here:

https://brainly.com/question/32924710

#SPJ12

Final answer:

For measuring a volume of 3.7 L with a micropipette, it’s not feasible using a P-10 pipettor due to its limited range. If the intended volume is 3.7 µL, dial 037 into the P-10 display. It's essential to use the pipettor within the correct volume range to avoid damage.

Explanation:

To measure a volume of 3.7 L (3700 mL) using a P-10 micropipette, which has a maximum volume of 10 µL (0.01 mL), would not be possible because the micropipette's volume range is much smaller than the volume you need to measure. However, if you meant to measure 3.7 µL, the numbers to dial on the P-10 display would be 037, indicating that you need to measure 3.7 µL. You should rotate the volume adjustment knob until the display shows these three digits. It is crucial to operate within the pipettor's specified volume range for accuracy and to prevent damage to the equipment.

Caution: Never turn the indicator dial beyond the micropipette's volume limits. To measure volumes accurately with a micropipette, ensure you are using the correct model for the desired volume range and adjust the dial accordingly. Using the P10 model, you can measure volumes as small as 1 µL up to 10 µL, which is its upper volume limit. Always consult the pipettor's manual or your lab guidelines when unsure about how to correctly set the volume on the micropipette.

Answer : The mass of helium gas in the balloon is, 1.23 grams.

Explanation : Given,

Volume of helium gas = 6.9 L

First we have to calculate moles of helium gas at STP.

As we know that, 1 mole of substance occupy 22.4 L volume of gas.

As, 22.4 L volume of helium gas present in 1 mole of helium

So, 6.9 L volume of helium gas present in [tex]\frac{6.9L}{22.4L}\times 1mole=0.308mole[/tex] of helium

Now we have to calculate the mass of helium gas.

[tex]\text{Mass of He gas}=\text{Moles of He gas}\times \text{Molar mass of He gas}[/tex]

Molar mass of He gas = 4 g/mol

[tex]\text{Mass of He gas}=0.308mol\times 4g/mol=1.23g[/tex]

Thus, the mass of helium gas in the balloon is, 1.23 grams.

To find the mass of helium in the balloon, we can use the ideal gas law equation to calculate the number of moles of helium, and then convert it to grams using the molar mass. The mass of helium in the balloon is 27.14 grams.

To find the mass of helium in the balloon, we need to know the density of helium. The ideal gas law can be used to calculate the density of a gas. The ideal gas law equation is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. Rearranging the equation gives us n = PV/RT. We can then use the molar mass of helium (4 g/mol) to convert the number of moles to grams. Since the volume of the balloon and the pressure are given, we can plug in the values and solve for the mass of helium.

Given:
Volume (V) = 6.9 L
Molar mass of helium = 4 g/mol
R = 8.31 J/mol · K

After performing the calculations, the mass of helium in the balloon is 27.14 grams.

Learn more about Calculating mass of helium in a balloon here:

https://brainly.com/question/17714670

#SPJ3

Answer:

25.41 g/mol is molar mass of metal.

Explanation:

Number of atom in BCC unit cell = Z = 2

Density of metal = [tex]0.867 g/cm^3[/tex]

Edge length of cubic unit cell= a = ?

Radius  of the atom of metal = r = [tex]2.30\times 10^{-8} cm[/tex]

[tex]a=2\times r=2\times 2.30\times 10^{-8} cm=4.60\times 10^{-8} cm[/tex]

Atomic mass of metal =M

Formula used :  

[tex]\rho=\frac{Z\times M}{N_{A}\times a^{3}}[/tex]

where,

[tex]\rho[/tex] = density

Z = number of atom in unit cell

M = atomic mass

[tex](N_{A})[/tex] = Avogadro's number  

a = edge length of unit cell

On substituting all the given values , we will get the value of 'a'.

[tex]0.867 g/cm^3=\frac{2\times M}{6.022\times 10^{23} mol^{-1}\times (4.60\times 10^{-8} cm)^{3}}[/tex]

[tex]M = 25.41 g/mol[/tex]

25.41 g/mol is molar mass of metal.

To calculate the molar mass of a metal with a body-centered cubic unit cell, you need to calculate the edge length of the unit cell. Once you have the edge length and the density of the metal, you can determine the molar mass.

The molar mass of a metal can be calculated using the formula:

Molar mass = (density × Avogadro's number) / (volume of one atom)

To calculate the volume of one atom, we need to know the type of unit cell and the edge length of the unit cell. Given that the metal crystallizes in a body-centered cubic unit cell, the edge length can be calculated using the formula:

Edge length = 4R / sqrt(3),

where R = radius of the atom.

Using the given radius of the atom (2.30 x 10-8 cm), we can calculate the edge length of the unit cell. With the edge length and the density of the metal (0.867 g/cm3), we can then calculate the molar mass of the metal.

The speed of sound in different mediums varies based on their properties. In air at 20 oC, the speed of sound is approximately 343 m/s. In helium, it is approximately 972 m/s, and in natural gas (methane), it is approximately 454 m/s.

The speed of sound in a medium depends on the properties of that medium. In general, sound travels faster in materials with higher densities and elastic properties. The equation to calculate the speed of sound in a medium is given by v = sqrt(E/p), where v is the speed of sound, E is the elastic modulus, and p is the density of the medium.

(a) In air at 20 oC, the speed of sound is approximately 343 m/s.

(b) In helium at 20 oC, the speed of sound is approximately 972 m/s.

(c) In natural gas (methane) at 20 oC, the speed of sound is approximately 454 m/s.

https://brainly.com/question/35989321

#SPJ3

Final answer:

The speed of sound in air at 20.0°C is 343 m/s. For other gases like helium and methane at the same temperature, their speeds of sound are higher due to their lower molecular masses. Helium has a much higher speed of sound, while methane's speed of sound is closer to but slightly higher than air.

Explanation:

The speed of sound in air at a given temperature can be calculated using the following formula, where °C represents degrees Celsius:

v = 331 m/s + (0.6 m/s/°C) × temperature

For air at 20.0°C, the speed of sound is:

v = 331 m/s + (0.6 m/s/°C) × 20.0°C

v = 331 m/s + 12 m/s

v = 343 m/s

For other gases like helium and methane at the same temperature, their speeds of sound are higher due to their lower molecular masses compared to air.

The speed of sound in helium and methane can be determined from tables or calculated using specific formulas accounting for the properties of these gases.

The energy of a photon with a wavelength of 1.3 Å is calculated using Planck's equation. The wavelength is first converted to frequency, and then substituted into Planck's equation along with Planck's constant. The result, 1.53 x 10^-15 J, is the energy of the photon in Joules.

The energy of a photon can be calculated using the Planck's equation E = hv, where 'v' is the frequency of radiation and 'h' is the Planck's constant (6.63 x 10^-34 J.s). In this case, we need to convert wavelength to frequency using the equation v = c/λ, where 'c' is the speed of light and 'λ' is the wavelength.

The given wavelength of 1.3 Å needs to be converted to meters: 1.3 Å = 1.3 x 10^-10 m. Then, the frequency can be calculated as: v = (3 x 10^8 m/s) / (1.3 x 10^-10 m) = 2.31 x 10^18 Hz.

Substituting these values into Planck's equation we get: E = (6.63 x 10^-34 J.s) x (2.31 x 10^18 Hz) = 1.53 x 10^-15 J. So, the energy of a photon of this radiation in Joules is 1.53 x 10^-15 J.

https://brainly.com/question/34240307

#SPJ12

The energy of one photon of X-ray radiation can be calculated using Planck's equation. In this case, the energy of one photon with a wavelength of 1.3 Å is approximately 1.53 × 10^-15 J.

The energy of one photon of X-ray radiation can be calculated using Planck's equation. The formula E = hv, where E is energy, h is Planck's constant, and v is frequency. In this case, we need to convert the wavelength of the X-ray to frequency using the relationship c = λv, where c is the speed of light.

First, convert the wavelength from angstroms to meters: 1.3 Å = 1.3 × 10^(-10) m.

Then, use the equation c = λv to solve for v: (3.00 × 10^8 m/s) = (1.3 × 10^(-10) m)v.

Solve for v: v = (3.00 × 10^8 m/s) / (1.3 × 10^(-10) m) = 2.31 × 10^18 Hz.

Finally, calculate the energy using E = hv: E = (6.63 × 10^(-34) J·s)(2.31 × 10^18 Hz) = 1.53 × 10^(-15) J.

https://brainly.com/question/5133327

#SPJ11

Answer:

3) Paraffin as a solvent results in more homogeneous heat distribution in the reaction vessel.

Explanation:

First off, cyclopentadiene is obtained by “cracking” dicyclopentadiene. The cracking is carried out at 300 °C.

How do we Know if the reaction mixture have reached 300°C for cracking to occur? You probably thinking we use a thermometer..

The temperature of the reaction should be about 300 degrees and a normal thermometer would explode because it would reach past the heating limit.

So what do we then use?

We use a solvent whose boiling point is above the temperature needed for the reaction to occur and that's where paraffin comes into play. The moment the solvent begins to boil, we are certain that the temperature needed for the reaction has been reached.

The correct answer is option 3.

Final answer:

Paraffin is added to the reaction flask when cracking dicyclopentadiene mainly as a solvent to ensure homogeneous heat distribution and to prevent the reaction vessel from running dry due to its high boiling point.

Explanation:

The purpose of adding paraffin to the reaction flask when cracking dicyclopentadiene can be explained as follows:

Paraffin acts as a solvent providing a more homogeneous heat distribution in the reaction vessel (Option 3). This uniform heat distribution is crucial for the reaction to proceed efficiently and safely.

Given that paraffin oil has a high boiling point, it helps in preventing the reaction vessel from running dry by maintaining an adequate volume of liquid during the high-temperature process (Option 6).

While paraffin oil itself is inflammable, contributing to safer laboratory conditions, this is not directly related to its role in cracking dicyclopentadiene. Therefore, the fourth claim is factually correct about paraffin but irrelevant in this context.

Answer:

53.4 % is the percent yield

Explanation:

This is the reaction:

C₆H₆ + Cl₂ → C₆H₅Cl + HCl

First of all we need to know the moles of benzene we used

39 g . 1 mol / 78 g = 0.5 moles

Ratio is 1:1 so 1 mol of benzene produces 1 mol of chloride

0.5 moles of chloride were produced by 0.5 moles of benzene

We must calculate the mass of chloride we produced

0.5 mol . 112.45 g / 1 mol = 56.2g

Let's calculate the  percent yield

(Yield produced / Theoretical yield ) . 100

(30 g / 56.2 g) . 100 = 53.4 %

Answer:

53.4%

ut quest

Answer: Option B. oxidized

Explanation:

Answer :  The electron configuration for the monatomic ions are shown below.

Explanation :

For the neutral atom, the number of protons and electrons are equal. But, they are unequal when the atoms present in the form of ions or the atom has some charges.

When an unequal number of electrons and protons then it leads to the formation of ionic species.

Ion : An ion is formed when an atom looses or gains electron.

When an atom looses electrons, it will form a positive ion known as cation.

When an atom gains electrons, it will form a negative ion known as anion.

(a) The given element is, Cl (Chlorine)

As we know that the rubidium element belongs to group 17 and the atomic number is, 17

The ground-state electron configuration of Cl is:

[tex]1s^22s^22p^63s^23p^5[/tex]

This element will easily gain 1 electron and form [tex]Cl^-[/tex] ion  which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Cl ion is:

[tex]1s^22s^22p^63s^23p^6[/tex]

(b) The given element is, Na (Sodium)

As we know that the sodium element belongs to group 1 and the atomic number is, 11

The ground-state electron configuration of Na is:

[tex]1s^22s^22p^63s^1[/tex]

This element will easily lose 1 electron and form [tex]Na^{+}[/tex] ion  which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Na ion is:

[tex]1s^22s^22p^6[/tex]

(c) The given element is, Mg (Magnesium)

As we know that the magnesium element belongs to group 2 and the atomic number is, 12

The ground-state electron configuration of Mg is:

[tex]1s^22s^22p^63s^2[/tex]

This element will easily lose 2 electrons and form [tex]Mg^{2+}[/tex] ion  which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Mg ion is:

[tex]1s^22s^22p^6[/tex]

(d) The given element is, Ca (Calcium)

As we know that the calcium element belongs to group 2 and the atomic number is, 20

The ground-state electron configuration of Ca is:

[tex]1s^22s^22p^63s^23p^64s^2[/tex]

This element will easily lose 2 electrons and form [tex]Ca^{2+}[/tex] ion which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Ca ion is:

[tex]1s^22s^22p^63s^23p^6[/tex]

(e) The given element is, K (Potassium)

As we know that the potassium element belongs to group 1 and the atomic number is, 19

The ground-state electron configuration of K is:

[tex]1s^22s^22p^63s^23p^64s^1[/tex]

This element will easily lose 1 electron and form [tex]K^{+}[/tex] ion  which attain stable noble gas electronic configuration.

The full ground-state electron configuration of K ion is:

[tex]1s^22s^22p^63s^23p^6[/tex]

(f) The given element is, Br (Bromine)

As we know that the bromine element belongs to group 17 and the atomic number is, 35

The ground-state electron configuration of Rb is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^5[/tex]

This element will easily gain 1 electron and form [tex]Br^-[/tex] ion which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Br ion is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^6[/tex]

(g) The given element is, Sr (Strontium)

As we know that the strontium element belongs to group 2 and the atomic number is, 38

The ground-state electron configuration of Rb is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^65s^2[/tex]

This element will easily lose 2 electrons and form [tex]Sr^{2+}[/tex] ion which attain stable noble gas electronic configuration.

The full ground-state electron configuration of Sr ion is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^6[/tex]

(h) The given element is, F (Fluorine)

As we know that the fluorine element belongs to group 17 and the atomic number is, 9

The ground-state electron configuration of F is:

[tex]1s^22s^22p^5[/tex]

This element will easily gain 1 electron and form [tex]F^{-}[/tex] ion  which attain stable noble gas electronic configuration.

The full ground-state electron configuration of F ion is:

[tex]1s^22s^22p^6[/tex]

An ion having only one atom is called a mono-atomic ion and is represented as the symbol of the element with mass and charge in subscript and superscript.

The ion that loses an electron is called a cation while the ion that acquires an electron is called an anion.

The electronic configuration of the following ions are:

a. Cl (Chlorine):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{5}[/tex]

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}[/tex]

b. Na (Sodium):

[tex]1s^{2}2s^{2}2p^{6}3s^{1}[/tex]

[tex]1s^{2}2s^{2}2p^{6}[/tex]

c. Mg (Magnesium):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}[/tex]

[tex]Mg^{2+}[/tex].

[tex]1s^{2}2s^{2}2p^{6}[/tex]

d. Ca (Calcium):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{2}[/tex]

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}[/tex]

e. K (Potassium):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{1}[/tex]

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}[/tex]

f.  Br (Bromine):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{2}3d^{10}4p^{5}[/tex]

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{2}3d^{10}4p^{6}[/tex]

g. Sr (Strontium):

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{2}3d^{10}4p^{6}5s^{2}[/tex]

[tex]1s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{2}3d^{10}4p^{6}[/tex]

h. F (Fluorine):

[tex]1s^{2}2s^{2}2p^{5}[/tex]

[tex]1s^{2}2s^{2}2p^{6}[/tex]

To learn more about electronic configuration of elements follow the link:

https://brainly.com/question/9616334

Explanation:

The weak intermolecular forces which can arise either between nucleus and electrons or between electron-electron are known as dispersion forces. These forces are also known as London dispersion forces and these are temporary in nature.

Dipole-dipole interactions are defined as the interactions that occur when partial positive charge on an atom is attracted by partial negative charge on another atom.

When a polar molecules produces a dipole on a non-polar molecule through distribution of electrons then it is known as dipole-induced forces.

Hydrogen bonding is defined as a bonding which exists between a hydrogen atom and an electronegative atom like O, N and F.

Chemical formula of acetone is [tex]CH_{3}COCH_{3}[/tex]. Due to the presence of oxygen atom there will be partial positive charge on carbon and a partial negative charge on oxygen atom. Hence, dipole-dipole forces will exist in a molecule of acetone.

Whereas hydrogen bonding will exist in a molecule of ethanol ([tex]CH_{3}CH_{2}OH[/tex]). Since, hydrogen atom is attached with electronegative oxygen atom.

Whereas London dispersion forces will also exist in both acetone and ethanol molecule.

The Justification are:

(a) has 7 electrons in its outermost shell, making it a halogen.

(b) has a full s subshell and belongs to the alkaline earth metals.

(c) has a complete electron shell and is an inert gas.

(d) has 1 electron in its outermost shell, classifying it as an alkali metal.

(e) has a partially filled d subshell, indicating a transition metal.

(f) has a full s subshell and is categorized as an alkaline earth metal.

(a) 1s² 2s² 2p⁶ 3s² 3p⁵- This configuration corresponds to the element Chlorine (Cl), which is a halogen.

(b) 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s²- This configuration corresponds to the element Calcium (Ca), which is an alkaline earth metal.

(c) 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶- This configuration corresponds to the noble gas Krypton (Kr), which is an inert gas.

(d) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹ -This configuration corresponds to the element Potassium (K), which is an alkali metal.

(e) 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d⁵ 5s² - This configuration corresponds to the element Yttrium (Y), which is a transition metal.

(f) 1s² 2s² 2p⁶ 3s² -This configuration corresponds to the element Magnesium (Mg), which is an alkaline earth

Read more about configurations here:

https://brainly.com/question/13233724

#SPJ1

See text below

Determine whether each of the following electron configurations is an inert gas, a halogen, an alkali metal, an alkaline earth metal, or a transition metal. Justify your choices.(a) 1s22s22p63s23p5(b) 1s22s22p63s23p63d74s2(c) 1s22s22p63s23p63d104s24p6(d) 1s22s22p63s23p64s1(e) 1s22s22p63s23p63d104s24p64d55s2(f) 1s22s22p63s2

The electron configurations correspond to different types of elements: (a) is a halogen, (b) is a transition metal, (c) is an inert gas, (d) is an alkali metal, (e) is an alkaline earth metal, and (f) is also an alkaline earth metal.

This question is about determining the type of atom from their electron configurations. Just by looking at the electron configurations, we can deduce what type of element we’re dealing with.

(a) 1s2 2s2 2p6 3s2 3p5: atoms with 5 valence electrons in their outer shell are in Group 17 of the periodic table, which are halogens.

(b) 1s2 2s2 2p6 3s2 3p6 3d7 4s2: transition metals have incomplete d-subshells in their electron configurations, therefore, this is a transition metal.

(c) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6: This configuration ends with a filled p6 subshell. This indicates that the element in question is an inert gas, which are known for their stability due to a complete set of electrons in their outermost energy level.

(d) 1s2 2s2 2p6 3s2 3p6 4s1: atoms that have one electron in their highest energy level (s1) are in Group 1 of the periodic table, which are alkali metals.

(e) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 5s2: This is an alkaline earth metal since it ends with an s2 orbiltal.

(f) 1s2 2s2 2p6 3s2: atoms with two valence electrons in their outer shell are in Group 2 of the periodic table, which are alkaline earth metals.

https://brainly.com/question/29157546

#SPJ1

Answer: The mass of sulfur dioxide is 14.6 grams

Explanation:

To calculate the number of moles, we use the equation given by ideal gas, which follows:

[tex]PV=nRT[/tex]

where,

P = pressure of the sulfur dioxide = 2.00 atm

V = Volume of the sulfur dioxide = 3.50 L

T = Temperature of the mixture = [tex]100^oC=[100+273]K=373K[/tex]

R = Gas constant = [tex]0.0821\text{ L. atm }mol^{-1}K^{-1}[/tex]

n = number of moles of sulfur dioxide = ?

Putting values in above equation, we get:

[tex]2.00atm\times 3.50L=n_{SO_2}\times 0.0821\text{ L atm }mol^{-1}K^{-1}\times 373K\\\\n_{SO_2}=\frac{2.00\times 3.50}{0.0821\times 373}=0.228mol[/tex]

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Moles of sulfur dioxide = 0.228 moles

Molar mass of sulfur dioxide = 64 g/mol

Putting values in above equation, we get:

[tex]0.228mol=\frac{\text{Mass of sulfur dioxide}}{64g/mol}\\\\\text{Mass of sulfur dioxide}=(0.228mol\times 64g/mol)=14.6g[/tex]

Hence, the mass of sulfur dioxide is 14.6 grams

The size of an ion is determined by the effective nuclear charge and the number of electrons in the ion. In isoelectronic ions, the size decreases with increasing effective nuclear charge. In ions with the same number of electrons, the size increases with increasing atomic number.

(a) In this set, the ions are all isoelectronic, meaning they have the same number of electrons. Therefore, their sizes are determined by the effective nuclear charge. The effective nuclear charge increases from Se²⁻ to S²⁻ to O²⁻ because the number of protons in the nucleus increases. So, the sizes of the ions decrease from Se²⁻ > S²⁻ > O²⁻.

(b) In this set, the ions have different numbers of electrons. The size of an ion generally increases with the addition of electrons. So, the sizes of the ions decrease from I⁻ > Te²⁻ > Cs⁺.

(c) In this set, the ions have the same number of electrons but different atomic numbers. The size of an ion generally increases with increasing atomic number. So, the sizes of the ions decrease from Cs⁺ > Sr²⁺ > Ba²⁺.

https://brainly.com/question/30663970

#SPJ12

The size of an ion is determined by the number of electrons surrounding it. In each set, the size of the ions decreases as you move along the set. The order of decreasing size for each set is explained based on the position of the elements on the periodic table.

(a) Se²⁻, S²⁻, O²⁻: The size of an ion is determined by the number of electrons surrounding it. As you move down a group on the periodic table, the size of the ions generally increases. Therefore, the order of decreasing size is O²⁻, S²⁻, Se²⁻.

(b) Te²⁻, Cs⁺, I⁻: In this set, the ionic size increases from Te²⁻ to I⁻. This is due to the decrease in the number of protons in the nucleus as you move down the periodic table. Cs⁺ is significantly smaller than Te²⁻ and I⁻ due to the removal of an electron.

(c) Sr²⁺, Ba²⁺, Cs⁺: Again, the size of the ions increases as you move down the periodic table. Therefore, the order of decreasing size is Cs⁺, Sr²⁺, Ba²⁺.

https://brainly.com/question/30328384

#SPJ12

The question is incomplete. the complete question is:

A chemist measures the energy change during the following reaction: [tex]2NO_2(g)\rightarrow N_2O_4[/tex]  [tex]\Delta H=-55.3kJ[/tex] 1. This reaction is:______. a. endothermic. b. exothermic.

2. Suppose 70.1 g of NO2 react. Will any heat be released or absorbed? A. Yes, absorbed. B. Yes, released. C. No.

3. If you said heat will be released or absorbed, calculate how much heat will be released or absorbed?

Answer:1.  b. exothermic

2. Yes , released

3.  42.0 kJ

Explanation:

1. Endothermic reactions are those in which heat is absorbed by the system and exothermic reactions are those in which heat is released by the system.

[tex]\Delta H[/tex] for Endothermic reaction is positive and [tex]\Delta H[/tex] for Exothermic reaction is negative.

2. [tex]2NO_2(g)\rightarrow N_2O_4[/tex]  [tex]\Delta H=-55.3kJ[/tex]

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{70.1g}{46g/mol}=1.52moles[/tex]

2 moles of [tex]NO_2[/tex] reacts, energy released = 55.3 kJ

1.52 moles of [tex]NO_2[/tex] reacts, energy released =[tex]\frac{55.3 kJ}{2}\times 1.52=42.0kJ[/tex]

Thus 42.0 kJ heat will be released when 70.1 g of [tex]NO_2[/tex]  react.

Answer: polar protic solvents solvate the nucleophile necessary for attack on the substrate in SN2 substitution.

Explanation:

Aprotic solvents are solvents that lack protons such as dimethyl sulphoxide (DMSO). DMSO has no exposed positive end. The positive end is buried inside the molecular structure. As a result of this, the nucleophile is not solvated. If the nucleophile is solvated, the rate of SN2 reaction will reduce drastically because the nucleophile becomes unavailable to attack the substrate. This solvation normally occur in polar protic solvents such as water because of the exposed positive end of the molecule which interacts with the nucleophile thereby reducing the rate of SN2 reaction.

Polar, aprotic solvents are better than polar, protic solvents for SN2 reactions because the nucleophiles are relatively free to approach the electrophilic carbon of the substrate.

Polar, aprotic solvents are better than polar, protic solvents for SN2 reactions because the nucleophiles are relatively free to approach the electrophilic carbon of the substrate.

In polar protic solvents, like water, the solvent forms a layer around the cation and anion through ion-dipole interactions. This solvent layer prevents nucleophiles from approaching the electrophilic carbon, making them unsuitable for SN2 reactions.

In polar, aprotic solvents, the anion (nucleophile) is relatively free because it is prevented from approaching the positive pole of the solvent due to steric hindrance.

Explanation:

Answer:

They form acidic solutions

SO2(g) + H2O(l) --> H2SO3(aq)

SO3(g) + H2O(l) --> H2SO4(aq)

Explanation:

Group 6 elements are elements on the periodic table with 6 atoms on their valence shell. Metallic properties increases down the group from oxygen through polonium. Examples are oxygen, polonium, sulphur etc.

Group 6 nonmetal oxides react with water to form acidic solutions, this is because the oxides of nonmetallic elements are basic in nature.

Sulphur exhibits a wide range of oxidation states ranging from +2 to +6. So its oxides are SO2 and SO3.

Example:

SO2(g) + H2O(l) --> H2SO3(aq)

SO3(g) + H2O(l) --> H2SO4(aq)