Answer:
According to kirk, this project was developed to solve traffic congestion and construction designs on the Boston's historically tangled streets which were laid out long ago.
The resultant of two forces p and q is 260N .if q is 80N and the angle between p and q is 30° find q
Answer:
256.9N
Explanation:
q is the other component of the forces when resolved using 260sin30=0
Answer:
q is already given so i assume you question is find P
p = 187.6N
Explanation:
\widehat{p\ }+ \hat{q} = \hat{R}
R = 260N
q = 80N
angle between p and q is 30°
Therefore, the angle the two vectors make to produce R is (180° – 30° = 150°) = 150°
Resolving q in x and y components = (80 cos 30)i + (80 sin 30)j
q = 69.3i + 40j
R = p + q
Let p = xi + yj
R = (xi + yj) + (69.3i + 40j)
R = 260N
Resolving R in x and y components
R = (260 cos \theta)i + (260 sin \theta)j
(260 cos \theta)i + (260 sin \theta)j = (xi + yj) + (69.3i + 40j)
(260 cos \theta)i + (260 sin \theta)j = (x + 69.3)i + (y + 40)j
Equating each component to the corresponding component
x + 69.3 = (260 cos \theta)……(i)
y + 40 = (260 sin \theta)……….(ii)
y = 0
0+ 40 = (260 sin \theta)
\theta = sin-1 (\frac{40}{260})
\theta = 8.8°
x + 69.3 = 260 cos 8.8°
x = 260 cos 8.8° - 69.3
x = 187.6i
p = 187.6N
An advantage presented by Straight in space is that___.
Why is it challenging to develop a problem statement for a project? What action can you take to work around this challenge to identify the problem?
A Problem Statement:
A problem statement is away from the depiction of the issue(s) that need(s) to be tended to by a critical thinking group. It plainly states what circumstance you're managing, why it's an issue, and what your optimal state would be. A straightforward and very much characterized issue proclamation will be utilized by the task group to comprehend the issue and work toward building up an answer.
An issue articulation is typically a couple of sentences to clarify the issue your procedure improvement task will address. When all is said in done, an issue explanation will plot the negative purposes of the present circumstance and clarify why these issues. Issue articulations frequently have three components: the issue itself, expressed obviously and with enough logical detail to set up why it is significant; the technique for taking care of the issue, regularly expressed as a case or a working proposal; the reason, explanation of goal and extent of the report the author is getting ready.
It is challenging to develop a problem statement for a project because it is required to carefully identify the problems in order to produce any product and/or service.
A project is an enterprise that is planned to achieve a particular objective.In engineering, projects are aimed at providing products and services.In consequence, an engineering project must carefully identify the roots of a problem (the need) and then the steps required to solve it.In conclusion, it is challenging to develop a problem statement for a project because it is required to carefully identify the problems in order to produce any product and/or service.
Learn more in:
https://brainly.com/question/14566039
Who is part of the design team in construction?
Answer:
An architect and engineers are the design team for construction projects. The team itself can also consist of an architectural company and an engineering firm that hires many architects or engineers.
Explanation:
The design team comprises the professionals needed to design the work and perhaps ensure that the work completed follows the project brief.
Designers are likely in the first place to be members of the customer's consultant team. This is generally supported by: architects.
Technologists of architecture.
Engineers of the system.
Engineers of infrastructure.
Designers of landscape.
The growing complexity of the building design means, however, that additional expertise such as: specialized facilities (e.g., kitchens, operating theatres, ponds, recording studios) is increasingly needed.
Designer of materials (for example, structural systems, doors and windows, vitreous or flooring).
Fittings and specialist equipment.
Equipment for audiovisuals.
Facilities for Information and Communications (ITC).
Facilities for safety and security.
Specialist systems (e.g. handling of baggage).
Lighting specialist.
Acoustic environment. Acoustic environment.
Which description defines the mechanical advantage of a simple lever?
A.
the ratio of the total lever length to the length of the effort arm
B.
the ratio of the length of the load arm to the length of the effort arm
C.
the ratio of the length of the effort arm to the length of the load arm
D.
the ratio of the length of the load arm to the total lever length
E.
the ratio of the length of the effort arm to the total lever length
The mechanical advantage of a simple lever is C. the ratio of the length of the effort arm to the length of the load arm
Explanation:
There are two types of mechanical advantage for a machine:
The Ideal Mechanical Advantage (IMA) is the mechanical advantage of the machine if there are no loss of energy due to internal frictions, i.e. if the output work is equal to the input workThe Actual Mechanical Advantage (AMA) is the real mechanical advantage of the machine, taking into account the energy lost due to internal frictional forcesThe IMA of a lever can be calculated starting from the assumption that all the input work is transformed into output work with no loss of energy, therefore:
[tex]W_{in}=W_{out}\\F_{in} d_{in} = F_{out} d_{out}[/tex]
where
[tex]F_{in},F_{out}[/tex] are the effort and load forces, respectively
[tex]d_{in}, d_{out}[/tex] are the effort and load arm, respectively
The mechanical advantage is a measure of the multiplication factor of the force, so we can write:
[tex]IMA=\frac{F_{out}}{F_{in}}=\frac{d_{in}}{d_{out}}[/tex]
Therefore, the correct answer is
C. the ratio of the length of the effort arm to the length of the load arm
Learn more about levers:
brainly.com/question/5352966
#LearnwithBrainly
The mechanical advantage of a simple lever is C. the ratio of the length of the effort arm to the length of the load arm
Explanation:
There are two types of mechanical advantage for a machine:
The Ideal Mechanical Advantage (IMA) is the mechanical advantage of the machine if there are no loss of energy due to internal frictions, i.e. if the output work is equal to the input work
The Actual Mechanical Advantage (AMA) is the real mechanical advantage of the machine, taking into account the energy lost due to internal frictional forces
The IMA of a lever can be calculated starting from the assumption that all the input work is transformed into output work with no loss of energy, therefore: C
The purpose of lubricant is to ______.
A.Eliminate moisture
B.Save money on tools
C.Reduce friction and wear
D.Clean and maintain tools
why do you think slaves traders and slave owners wanted to keep slaves uneducated?
Select all that apply: Contaminated sharps should
not be
----
Contaminated sharps must never be sheared or broken.
Sharps that are contaminated should never be broken or sheared. It is only acceptable to retract, bend, or remove needles when no other practical option is available or when doing so is necessary for a particular medical or dental operation.
To protect people and the environment, it is essential to dispose of contaminated sharps according to the correct procedures. Sharp objects, like lancets, scalpels, and needles, should never be thrown away in conventional trash cans after coming into touch with potentially infected items. Rather, they ought to be disposed of in containers made especially for puncture-proof sharps disposal. Usually marked as biohazardous trash, these containers need to be disposed of in accordance with local laws and regulations.
Working as a team to design a skyscraper would most satisfy which of these personal benefits of work? for odyssey
1.a want
2.being with others
3.feeling respected
4.earning money
Answer:
The answer for Odyssey is B: Being with others.
Explanation:
Answer:
The answer to this question is:
Being With Others
in measuring what does NEST stand for?
Answer:
national employment savings trust
Explanation:
Multi lane roads use __ to divide lanes of traffic moving in the same direction.
A. White lines
B. Yellow lines
C. Diagonal stripes
D. Orange stripes
Answer:
A. White lines
Explanation:
Multi lane roads use White lines to divide lanes of traffic moving in the same direction.
While driving, we occasionally see certain types of lines on the road.
There are various sorts of roads. There might be single lanes, double lanes, multilane lanes, etc. Similar to how the lines that we see on these lanes are different.
White broken lines are used to divide the lanes when there are several lanes travelling in the same direction, typically three or four lanes. Depending on the speed and traffic in the lanes, people can change from one lane to another.
However, there are also some locations on the highways where these crooked lines solidify, at which point it is illegal to change lanes until the crooked white lines are once again visible.
Learn more about Road lines here:
https://brainly.com/question/13812064
#SPJ2
David wants to determine what his organization should do in the future, and set project targets. Which management function can David use to do this
Answer:
Forecasting
Explanation:
Organizational forecasting is estimating of future events for the purpose of effective planning and decision making. This is one of the critical organizational functions as the forecast help managers to anticipate the future and to plan accordingly. Examples are financial forecasting, reporting, and operational metrics tracking, analyze financial data, create financial models use to predict future revenues.
so what is a wole numbe