A person jumps from the roof of a house 3.5-m high. When he strikes the ground below, he bends his knees so that his torso decelerates over an approximate distance of 0.71 m .


If the mass of his torso (excluding legs) is 45 kg , find the magnitude of the average force exerted on his torso by his legs during deceleration.

Amplitude of oscillation is 0.33 m

Explanation:

Amplitude is the maximum displacement of points on a wave from the point of equilibrium. In the above question,mass attached to a spring of k=18.9N/m follows an oscillatory motion where ,

Angular frequency = [tex]\sqrt{k/m}[/tex] where k is the spring constant and m is the mass

Angular frequency =[tex]\sqrt{18.9/.250[/tex] = 8.69

Therefore ,amplitude is equal to velocity/angular velocity

A=2.89/8.69

 =0.33m

Hence , the amplitude of oscillation is 0.33 m.

Answer:

0.33

Explanation:

Answer:

(D) eight

Explanation:

In carbon dioxide (CO2), there are two oxygen atoms for each carbon atom. Each oxygen atom forms a double bond with carbon, therefore the molecule is formed by two double bonds. Two double bonds means that the total number of electrons being shared in the molecule is. eight.

Option D

The resistance in machine is 8.5 ohms

Solution:

Given that,

Power = 1700 W

Voltage = 120 V

We have to find the resistance in machine

The formula used is:

[tex]P = \frac{V^2}{R}[/tex]

Where,

"P" is the electric power and "V" is the voltage and "R" is the resistance

Substituting the given values we get,

[tex]1700 = \frac{120^2}{R}\\\\1700 = \frac{14400}{R}\\\\R = \frac{14400}{1700}\\\\R = \frac{144}{17}\\\\R = 8.47 \approx 8.5[/tex]

Thus resistance in machine is 8.5 ohms

Answer:

a: radiation

b: convection

c: conduction

Explanaa:tion:

Most of the climate changes over the past 650000 years are attributed to global warming

Explanation:

Global Warming is the rise in the average temperature of the Earth's climate system over a time period. It leads to climate change.

Global warming is mainly caused by man, who by his actions causes an increase in the temperature on Earth.

The main way that he influences this phenomenon is, he is responsible for emission of greenhouse gases like  carbon di -oxide , methane and other gases.

This paves way for the sea level rising, Ice in Arctic regions melting, frequent extreme weather conditions.

In some areas there might be abundant rainfall and in other areas there might be drought.

The impact of global warming will be extinction of many species,  low crop yield.

Rising sea levels, will have an impact on people living in coastal areas.

So we have to do what we can to slow down the global warming and protect our environment and our Earth.

Answer:

Molecules speed up

Explanation:

This is caused because of the temperature increasing. The temperature increase is telling us that the thermal energy of the reaction is increasing. When the energy is increased molecules increase their speed, because they have more energy in them

Answer:

Molecules speed up

Explanation:

Answer:

A) 8.03Hz

Explanation:

f = V/λ

Where wavelength( λ )= 30m

Speed (V) =241m/S

f= 241/30=8.03Hz

Final answer:

To raise the temperature of 50.0 grams of water by 10.0 degrees Celsius, 2092 joules of energy are required, calculated using the specific heat capacity formula where the specific heat capacity of water is 4.184 J/g°C.

Explanation:

To calculate how much energy is required to raise the temperature of 50.0 grams of water by 10.0 degrees Celsius, we use the specific heat capacity formula:

q = mcΔT

where:

Substituting the given values:

q = (50.0 g) x (4.184 J/g°C) x (10.0 °C)

q = 2092 J

Therefore, it requires 2092 joules of energy to raise the temperature of 50.0 grams of water by 10.0 degrees Celsius.

If an object has a density greater than the liquid in which it is placed it will sink.

Explanation:

Density of the object can be known by its mass and volume.

If two objects have same volume but different masses it means the one having more mass will have higher density. Density is amount of mass per unit volume.

Objects that are tightly packed have higher density.

According to Archimedes' principle when a body is fully immersed that an upward buoyant force is equal to weight of the fluid that object displaces.

Objects with a greater density than a surrounding liquid will sink while objects with a lesser density will float, as explained by Archimedes' Principle.

If an object has a density greater than the liquid in which it is placed, it will sink. This can be explained by Archimedes' Principle, which suggests that an object's buoyancy or tendency to float is determined by the relative densities of the object and the fluid it is in. The denser an object is, the more weight it has for its size, which means it is less buoyant and more prone to sinking than floating.

For example, if you drop a stone (denser) in a pond, it will sink because its density is greater than that of water. On the other hand, ice, which is less dense than water due to its molecular structure, will float.

Alternatively, objects with a density less than the liquid they are placed in will float, like oil on water, hot air balloons in the atmosphere, or bits of cork in wine. This is because they displace more fluid weight than their own, creating a buoyant force that exceeds their own weight.

https://brainly.com/question/7103480

#SPJ11

Answer:

A semiconductor diode is a diode produced and made of its semiconductor material, which is more likely and most of the time silicon. It's similar and kind of like a door for electricity to move through, but the thing is it only opens one way.

Explanation:

A diode is a device for controlling electrical currents so that they flow the desired way. (Pretty much the way the engineer wants them to.)

Answer:150Nm

Explanation:

Force=50.0N distance=3.00m

Work=force x distance

Work=50 x 3

Work=150Nm

Answer:

B. 150 minutes per week

Explanation:

American Heart Association suggests at least 150 minutes per week of moderate-intensity aerobic activity to adults.

Answer:

Therefore the depth in the ocean at which the presser is three times atmospheric presser is 20.15 m.

Explanation:

The pressure at some depth

[tex]P=P_\circ +\rho gh[/tex]  

[tex]P_\circ=[/tex] atmospheric presser = [tex]1.013\times 10^5[/tex] Pa

[tex]\rho=[/tex] density of the sea [tex]= 1025 kg / m^3[/tex]

g = gravity = 9.81 m/s²

h = depth of the ocean

P= atmospheric presser at depth = [tex]3P_\circ[/tex]

Therefore

[tex]3P_\circ=P_\circ +\rho gh[/tex]

[tex]\Leftrightarrow \rho gh=2P_\circ[/tex]

[tex]\Leftrightarrow h=\frac{2P_\circ}{\rho g}[/tex]

[tex]\Leftrightarrow h=\frac{2 \times 1.013 \times 10^5}{1025 \times 9.81}[/tex]

[tex]\Leftrightarrow h= 20.15[/tex]

Therefore the depth in the ocean at which the presser is three times atmospheric presser is 20.15 m.

Answer:

1

Explanation:

If you take a look on a periodic table of elements, you will notice that hydrogen has the atomic number of 1. This number directly corresponds to the number of electrons an atom has.

Let me know if you have any other questions!

A neutral hydrogen atom has exactly one electron orbiting its nucleus. This electron is situated in the 1s orbital, part of the atom's valence shell, highlighting hydrogen's unique position in the periodic table and its ability to bond with other elements.

A hydrogen atom consists fundamentally of a nucleus and one electron orbiting this nucleus. When we discuss a neutral hydrogen atom, we refer to an atom where the number of protons (positively charged particles within the nucleus) is equal to the number of electrons (negatively charged particles orbiting the nucleus). Since hydrogen is the first element in the periodic table, it has exactly one proton in its nucleus. Consequently, to maintain electrical neutrality, a hydrogen atom also has exactly one valence electron. This electron occupies the 1s orbital, the closest orbital to the nucleus, which is part of the hydrogen atom's n = 1 valence shell.

This shell can hold up to two electrons, showing hydrogen's potential to bond or interact with other atoms either by losing its electron to become a cation (H+) or by gaining an electron to form a hydride ion (H−), or it can share its electron to form a single covalent bond. Therefore, hydrogen is not only a group 1 element but also shares characteristics with group 17 elements due to its unique electron configuration.

Answer: 0.057 kg

Explanation:

We can find the mass of the oil if we know its density and the volume it occupies. Since the density [tex]\rho[/tex] is a relation between the mass [tex]m[/tex] and the volume [tex]V[/tex] of a substance:

[tex]\rho=\frac{m}{V}[/tex] (1)

Now, the density of oil is generally between [tex]700 \frac{kg}{m^{3}}[/tex] and [tex]950 \frac{kg}{m^{3}}[/tex]. However, in this case we will take [tex]950 \frac{kg}{m^{3}}[/tex] as its density.

In adition, we are given as data the volume thw oil occupies:

[tex]V=60 cm^{3} \frac{1 m^{3}}{(100 cm)^{3}}=6(10)^{-5} m^{3}[/tex]

Writing these values in (1):

[tex]950 \frac{kg}{m^{3}}=\frac{m}{6(10)^{-5} m^{3}}[/tex] (2)

Isolating [tex]m[/tex]:

[tex]m=0.057 kg[/tex] This is the mass of the oil

Answer:

Thermal energy is the part of internal energy that is capable of being transferred to other objects.

Explanation:

Thermal energy is capable of being transferred until the objects become the same temperature, called equilibrium.

The best description of the relationship between internal energy and thermal energy is thermal energy is the portion of internal energy that can be transferred. The correct option is d.

The energy present in a system that determines its temperature is referred to as thermal energy. Thermal energy flows as heat. Thermodynamics is a whole field of physics that studies how heat is transmitted between various systems and how work is performed in the process.

Heat is the component of thermal energy that may be transferred, and heat is the energy that moves within. In thermodynamics, the internal energy is a property or state function that characterizes a substance's energy in the absence of capillary effects and the impacts of external magnetic, electric, and other fields.

Therefore, the correct option is d, Thermal energy is the portion of internal energy that can be transferred.

To learn more about thermal energy, refer to the link:

https://brainly.com/question/18989562

#SPJ2

Answer:

Imp = -4 [kg*m/s]

Explanation:

To determine the impulse we must know the initial speed and final velocity of the ball, that is before and after hitting the wall. As these data are given in the input information, we can very easily find the value of the impulse given during the hit on the wall.

[tex]m*v_{1}+Imp=mv_{2} \\Imp= m*v_{2}-m*v_{1}\\Imp = (2*4)-(2*6)\\Imp = -4[kg*\frac{m}{s} ] \\[/tex]

The negative sign means that the impulse is given in the opposite direction to the one that the ball was thrown.

Answer:

AB 15×15=225

A<B false because A=B

the answer is c because A=B

The average acceleration of the baseball while it's compressing the glove can be calculated using the equation of motion. This results in an acceleration of -101.66 m/s^2, indicating the ball is slowing down.

The question about finding the average acceleration of a baseball while it's compressing the catcher's glove pertains to a physics concept. We are told that the baseball is moving at a speed of 2.2 m/s when it strikes the glove, and it comes to a stop by compressing the glove by 24mm.

We can use the equation of motion: Final velocity^2 = Initial velocity^2 + 2*(Acceleration*Distance). Here, the final velocity of the baseball is zero (as it comes to a stop), the initial velocity is 2.2 m/s, and the distance is 24mm (or 0.024m, as we need to express the distance in the same unit).

Therefore, the average acceleration of the baseball is - (Initial velocity^2) / (2*Distance) = - (2.2^2) / (2*0.024) = -101.66 m/s^2. The negative sign indicates the acceleration is in the opposite direction of the ball's motion, which is expected as it's slowing down and eventually coming to a stop.

https://brainly.com/question/33442003

#SPJ3

Answer:

D_momentum = 3.23[kg*m/s]

Explanation:

The change of moment can be easily determined by applying the principle of momentum and amount of movement

initial data are:

[tex]m_{1}=0.17[kg]\\ m_{2}=0.17[kg]\\v_{1}=54[m/s]\\v_{2}=35[m/s]\\D_{momentum}= m_{1}*v_{1}-m_{2}*v_{2}\\D_{momentum}=0.17(54-35)\\D_{momentum}= 3.23[kg*m/s][/tex]

Given values,

Mass,

Velocity,

We know,

→ [tex]D_{momentum } = m_1\times v_1-m_2\times v_2[/tex]

By putting the values,

                     [tex]= 0.17\times 54-0.17\times 35[/tex]

                     [tex]= 0.17(54-35)[/tex]

                     [tex]= 0.17\times 19[/tex]

                     [tex]= 3.23 \ kg.m/s[/tex]

Thus the above approach is right.                

Learn more about momentum here:

https://brainly.com/question/22161504

Image formed by concave mirror when an object is place less than one focal length away is a virtual image.

Explanation:

When an object is placed less than one focal length from concave mirror, the light rays from the same point on object reflect on the mirror and diverge. Hence causing the image formed to be magnified and virtual. The image must be found by extending the reflected beams in reverse direction of the mirror.The intersection point is the virtual image area. Similar concept can be used to explain why earth looks flat to someone near the ground.

Answer:

Correct answer: t = 2.86 seconds

Explanation:

We first use this formula

V² - V₀² = 2 a d    

where V is the final velocity (speed), V₀ the initial velocity (speed),

a the acceleration and d the distance.

We will calculate the acceleration from this formula

a = (V² - V₀²) / (2 d) = (2.5² - 1²) / (2 · 5) = (6.25 - 1) / 10 = 5.25 / 10

a = 0.525 m/s²

then we use this formula

V = V₀ + a t  => t = (V - V₀) / a = (2.5 - 1) / 0.525 = 1.5 / 0.525 = 2.86 seconds

t = 2.86 seconds

God is with you!!!

Final answer:

Using kinematic equations and given values of initial and final velocities, along with the distance covered, the swimmer took approximately 2.86 seconds to accelerate to 2.5 m/s.

Explanation:

A swimmer is swimming to the left with a speed of 1.0 m/s and then accelerates to a final speed of 2.5 m/s over a distance of 5.0 m.

To find the time taken to accelerate to 2.5 m/s, we can use the kinematic equation which relates initial velocity, final velocity, acceleration, and distance: [tex]v^2 = u^2 + 2as[/tex], where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.

Substituting the given values, we can solve for a, and then use v = u + at to find the time, t.

First, solving for a:
[tex]2.5^2 = 1.0^2 + 2(a)(5.0)[/tex]
6.25 = 1 + 10a
a = [tex]0.525 m/s^2[/tex]

Then, solving for t:
2.5 = 1.0 + (0.525)t
t = 2.857 seconds.

So, the swimmer took approximately 2.86 seconds to speed up to 2.5 m/s.

A) A low frequency wave has a long wavelength.

Explanation:

Electromagnetic waves are periodic oscillations of the electric and the magnetic field in a plane perpendicular to the direction of motion the wave.

Electromagnetic waves travel in a vacuum always at the same speed, the speed of light:

[tex]c=3.0\cdot 10^8 m/s[/tex]

The wavelength and the frequency of an electromagnetic wave are related by the wave equation:

[tex]c=f\lambda[/tex]

where

c is the speed of light

f is the frequency

[tex]\lambda[/tex] is the wavelength

From the equation above, we observe that the frequency and the wavelength are inversely proportional. Therefore, the only correct option could be

A) A low frequency wave has a long wavelength.

Learn more about frequency and wavelength:

brainly.com/question/5354733

brainly.com/question/9077368

#LearnwithBrainly

Answer:

39.2 N

Explanation:

1kg at the earth's surface has a force of 9.8 N acting on it.

(4 kg) (9.8N) = 39.2 N

The image on the poster emphasizes the importance of utilizing every minute of production time

An image is a graphic representation which often conveys a message. It has been a common practice to pass on important messages by the use of imagery.

From the image on the poster, the message conveyed is that; the image of a large clock next to an unproductive worker emphasizes the importance of utilizing every minute of production time.

Learn more about imagery: https://brainly.com/question/14281270

Answer: B

Explanation:

Explanation:

a) Acceleration is the change in velocity over change in time.

a = Δv / Δt

a = (-2.00 m/s − 5.00 m/s) / (14.0 s − 3.00 s)

a = -7/11 m/s²

a ≈ -0.636 m/s²

b) Force is mass times acceleration.

F = ma

F = (30.0 kg) (-0.636 m/s²)

F = -19.1 N

Answer:

1-A

2-C

3-C

4-A

Explanation:

1.   waves

2.   visible light

3.   visible light

4.   bends

1. The electromagnetic spectrum contains many types of waves.

A) waves B) Objects C) Particles

An electromagnetic spectrum has frequency, from lowest to highest frequency, therefore including all radio waves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.

2. The colors we see are all part of visible light.

A) X rays B) UV waves C) visible light

The light we are able to see is called the visible light spectrum, which ranges from violet light, having a wavelength of approx. 400 nanometers, to red light, having a wavelength of around 650-700 nanometers.

3. We can see because of visible light.

A) UV waves B) infrared light C) visible light

We are able to see because of the sunlight striking an object and reflecting back which moves through space and reaches our eyes.

4. When visible light passes through a prism or a drop of water, the light bends and we see a rainbow of color.

A) Bends B) Reflects C) Bounces

The rainbow effect occurs because when light strikes a water droplet, it is refracted at the boundary of air and water, and enters the droplet, where the light is dispersed into the seven colors, the light is then reflected inside the droplet and finally refracted out again into the air.

To know more visit:

https://brainly.com/question/13349357

The density is [tex]1106 kg/m^3[/tex]

Explanation:

The bulk modulus of a liquid is defined as

[tex]B=\rho_0 \frac{\Delta p}{\Delta \rho}[/tex]

where

[tex]\rho_0[/tex] is the density at the reference level

[tex]\Delta p[/tex] is the change in pressure

[tex]\Delta \rho[/tex] is the change in density

The equation can be re-arranged as

[tex]\Delta \rho = \frac{\rho_0 \Delta p}{B}[/tex]

In this problem, we have:

[tex]\rho_0 = 1100 kg/m^3[/tex] (density at the surface)

[tex]B=2.3\cdot 10^9 N/m^2[/tex] (bulk modulus of seawater)

[tex]\Delta p = 126 - 1 = 125 atm = (125\cdot 1.01\cdot 10^5) Pa[/tex] (pressure difference between the point where p = 126 atm and the pressure at sea level, which is 1 atm)

Therefore,

[tex]\Delta \rho = \frac{(1100)(125\cdot 1.01\cdot 10^5)}{2.3\cdot 10^9}=6.0 kg/m^3[/tex]

So, the density at the depth where the pressure is 126 atm is

[tex]\rho = \rho_0 +\Delta \rho = 1100+6=1106 kg/m^3[/tex]

Learn more about pressure in fluids:

brainly.com/question/4868239

brainly.com/question/2438000

#LearnwithBrainly

Answer:c and d

Explanation:

i just looked it up and read

Answer:

Argon(Ar) and Nitrogen(N2)

Explanation: